From sdm660 onwards, the sdcc core will support
CDR in CMDQ mode, so it needs to be enabled.
This change is to enable CDR for cmdq mode.
Change-Id: I64681a3c94b6bd4191337c5c014171ff32a7d3c1
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
While switching from hs400 to hs200 mode, high speed mode
timing should be selected in the device before changing the
clock frequency in the host. But current implementation,
(mmc_hs400_to_hs200) first updates the frequency in the host
and then updates mode in the device. This is a spec violation.
Hence update the sequence to comply with the spec.
Change-Id: I0694edac9dd005ec68add9cc38bbe6fa4245ed48
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Upon encountering any error, few important registers are being captured
in trace logs in sdhci_dumpregs(). But without capturing exact error,
it would be tough to determine from which point in driver this dumpregs
has called. So capture the error state as well in Trace logs before
calling sdhci_dumpregs(). Also capture power irq related registers in
Trace logs upon any power irq related errors.
Change-Id: Ide172cdfb88a988cd4220bed03d05b8c6c4f15cb
Signed-off-by: Siba Prasad <sibap@codeaurora.org>
Memory allocations with GFP_KERNEL flag in clock scaling path might
trigger IO transfer. This can cause deadlock since the claim_host
lock which is needed by mmc driver to perform IO is held by clock
scaling context.
Below is the exact call sequence:
mmc_devfreq_set_target() -> mmc_clk_update_freq () ->
mmc_change_bus_speed() -> mmc_select_hs400() -> mmc_select_bus_width()
-> mmc_get_ext_csd() -> kzalloc(512, GFP_KERNEL) -> try_to_free_pages()
-> evict() -> ext4_evict_inode().
To avoid this scenario, use PF_MEMALLOC flag for clock scaling context
so that it can have access to the more reserves of memory. And since
devfreq workitem would run in different kworker threads, restore to
original flags once done with setting clock frequency.
Change-Id: If52f83f6ecae982d8ed709b08fd84545c7ecbc43
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Ratelimit the error log in order to avoid flooding the logs in
case of function mmc_blk_cmd_recovery() gets called repeatedly.
Change-Id: Ic72087382fca2e188f1bbd8195a805cd751ed22e
Signed-off-by: Siba Prasad <sibap@codeaurora.org>
Removed a local variable in mmc_start_req() which was used to store the
error encountered while starting a new data request. If an error is
encountered while starting a new request, the error
information is stored in the mrq. The error information stored in the
mrq is during error handling. So removing the unused variable.
Change-Id: Ifeedc91433230d5156d286bd332a85fb221188ac
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
As per emmc specification, device should be notified either with
power-off or sleep notification before turning off the Vcc.
Failing to do so might affect the device longevity.
In mmc driver initialization phase even before device probing
gets completed, Vcc is getting turned off without these notifications.
Since it can't send commands at this stage, So just ensure that Vcc
is not turned off till initialization gets completed.
Change-Id: I0bbf0077357d66c888147be40a0c5d312b9ce063
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
* refs/heads/tmp-6fc0573:
Linux 4.4.71
xfs: only return -errno or success from attr ->put_listent
xfs: in _attrlist_by_handle, copy the cursor back to userspace
xfs: fix unaligned access in xfs_btree_visit_blocks
xfs: bad assertion for delalloc an extent that start at i_size
xfs: fix indlen accounting error on partial delalloc conversion
xfs: wait on new inodes during quotaoff dquot release
xfs: update ag iterator to support wait on new inodes
xfs: support ability to wait on new inodes
xfs: fix up quotacheck buffer list error handling
xfs: prevent multi-fsb dir readahead from reading random blocks
xfs: handle array index overrun in xfs_dir2_leaf_readbuf()
xfs: fix over-copying of getbmap parameters from userspace
xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
xfs: Fix missed holes in SEEK_HOLE implementation
mlock: fix mlock count can not decrease in race condition
mm/migrate: fix refcount handling when !hugepage_migration_supported()
drm/gma500/psb: Actually use VBT mode when it is found
slub/memcg: cure the brainless abuse of sysfs attributes
ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430
pcmcia: remove left-over %Z format
drm/radeon: Unbreak HPD handling for r600+
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
scsi: mpt3sas: Force request partial completion alignment
HID: wacom: Have wacom_tpc_irq guard against possible NULL dereference
mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read
i2c: i2c-tiny-usb: fix buffer not being DMA capable
vlan: Fix tcp checksum offloads in Q-in-Q vlans
net: phy: marvell: Limit errata to 88m1101
netem: fix skb_orphan_partial()
ipv4: add reference counting to metrics
sctp: fix ICMP processing if skb is non-linear
tcp: avoid fastopen API to be used on AF_UNSPEC
virtio-net: enable TSO/checksum offloads for Q-in-Q vlans
be2net: Fix offload features for Q-in-Q packets
ipv6: fix out of bound writes in __ip6_append_data()
bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
qmi_wwan: add another Lenovo EM74xx device ID
bridge: netlink: check vlan_default_pvid range
ipv6: Check ip6_find_1stfragopt() return value properly.
ipv6: Prevent overrun when parsing v6 header options
net: Improve handling of failures on link and route dumps
tcp: eliminate negative reordering in tcp_clean_rtx_queue
sctp: do not inherit ipv6_{mc|ac|fl}_list from parent
sctp: fix src address selection if using secondary addresses for ipv6
tcp: avoid fragmenting peculiar skbs in SACK
s390/qeth: avoid null pointer dereference on OSN
s390/qeth: unbreak OSM and OSN support
s390/qeth: handle sysfs error during initialization
ipv6/dccp: do not inherit ipv6_mc_list from parent
dccp/tcp: do not inherit mc_list from parent
sparc: Fix -Wstringop-overflow warning
android: base-cfg: disable CONFIG_NFS_FS and CONFIG_NFSD
schedstats/eas: guard properly to avoid breaking non-smp schedstats users
BACKPORT: f2fs: sanity check size of nat and sit cache
FROMLIST: f2fs: sanity check checkpoint segno and blkoff
sched/tune: don't use schedtune before it is ready
sched/fair: use SCHED_CAPACITY_SCALE for energy normalization
sched/{fair,tune}: use reciprocal_value to compute boost margin
sched/tune: Initialize raw_spin_lock in boosted_groups
sched/tune: report when SchedTune has not been initialized
sched/tune: fix sched_energy_diff tracepoint
sched/tune: increase group count to 5
cpufreq/schedutil: use boosted_cpu_util for PELT to match WALT
sched/fair: Fix sched_group_energy() to support per-cpu capacity states
sched/fair: discount task contribution to find CPU with lowest utilization
sched/fair: ensure utilization signals are synchronized before use
sched/fair: remove task util from own cpu when placing waking task
trace:sched: Make util_avg in load_avg trace reflect PELT/WALT as used
sched/fair: Add eas (& cas) specific rq, sd and task stats
sched/core: Fix PELT jump to max OPP upon util increase
sched: EAS & 'single cpu per cluster'/cpu hotplug interoperability
UPSTREAM: sched/core: Fix group_entity's share update
UPSTREAM: sched/fair: Fix calc_cfs_shares() fixed point arithmetics width confusion
UPSTREAM: sched/fair: Fix incorrect task group ->load_avg
UPSTREAM: sched/fair: Fix effective_load() to consistently use smoothed load
UPSTREAM: sched/fair: Propagate asynchrous detach
UPSTREAM: sched/fair: Propagate load during synchronous attach/detach
UPSTREAM: sched/fair: Fix hierarchical order in rq->leaf_cfs_rq_list
BACKPORT: sched/fair: Factorize PELT update
UPSTREAM: sched/fair: Factorize attach/detach entity
UPSTREAM: sched/fair: Improve PELT stuff some more
UPSTREAM: sched/fair: Apply more PELT fixes
UPSTREAM: sched/fair: Fix post_init_entity_util_avg() serialization
BACKPORT: sched/fair: Initiate a new task's util avg to a bounded value
sched/fair: Simplify idle_idx handling in select_idle_sibling()
sched/fair: refactor find_best_target() for simplicity
sched/fair: Change cpu iteration order in find_best_target()
sched/core: Add first cpu w/ max/min orig capacity to root domain
sched/core: Remove remnants of commit fd5c98da1a42
sched: Remove sysctl_sched_is_big_little
sched/fair: Code !is_big_little path into select_energy_cpu_brute()
EAS: sched/fair: Re-integrate 'honor sync wakeups' into wakeup path
Fixup!: sched/fair.c: Set SchedTune specific struct energy_env.task
sched/fair: Energy-aware wake-up task placement
sched/fair: Add energy_diff dead-zone margin
sched/fair: Decommission energy_aware_wake_cpu()
sched/fair: Do not force want_affine eq. true if EAS is enabled
arm64: Set SD_ASYM_CPUCAPACITY sched_domain flag on DIE level
UPSTREAM: sched/fair: Fix incorrect comment for capacity_margin
UPSTREAM: sched/fair: Avoid pulling tasks from non-overloaded higher capacity groups
UPSTREAM: sched/fair: Add per-CPU min capacity to sched_group_capacity
UPSTREAM: sched/fair: Consider spare capacity in find_idlest_group()
UPSTREAM: sched/fair: Compute task/cpu utilization at wake-up correctly
UPSTREAM: sched/fair: Let asymmetric CPU configurations balance at wake-up
UPSTREAM: sched/core: Enable SD_BALANCE_WAKE for asymmetric capacity systems
UPSTREAM: sched/core: Pass child domain into sd_init()
UPSTREAM: sched/core: Introduce SD_ASYM_CPUCAPACITY sched_domain topology flag
UPSTREAM: sched/core: Remove unnecessary NULL-pointer check
UPSTREAM: sched/fair: Optimize find_idlest_cpu() when there is no choice
BACKPORT: sched/fair: Make the use of prev_cpu consistent in the wakeup path
UPSTREAM: sched/core: Fix power to capacity renaming in comment
Partial Revert: "WIP: sched: Add cpu capacity awareness to wakeup balancing"
Revert "WIP: sched: Consider spare cpu capacity at task wake-up"
FROM-LIST: cpufreq: schedutil: Redefine the rate_limit_us tunable
cpufreq: schedutil: add up/down frequency transition rate limits
trace/sched: add rq utilization signal for WALT
sched/cpufreq: make schedutil use WALT signal
sched: cpufreq: use rt_avg as estimate of required RT CPU capacity
cpufreq: schedutil: move slow path from workqueue to SCHED_FIFO task
BACKPORT: kthread: allow to cancel kthread work
sched/cpufreq: fix tunables for schedfreq governor
BACKPORT: cpufreq: schedutil: New governor based on scheduler utilization data
sched: backport cpufreq hooks from 4.9-rc4
ANDROID: Kconfig: add depends for UID_SYS_STATS
ANDROID: hid: uhid: implement refcount for open and close
Revert "ext4: require encryption feature for EXT4_IOC_SET_ENCRYPTION_POLICY"
ANDROID: mnt: Fix next_descendent
Conflicts:
include/trace/events/sched.h
kernel/sched/Makefile
kernel/sched/core.c
kernel/sched/fair.c
kernel/sched/sched.h
Change-Id: I55318828f2c858e192ac7015bcf2bf0ec5c5b2c5
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Set the dll to last known good phase before sending status command
while executing tuning. This is to ensure that status command won't
fail due to bad phase. Thus we can avoid sending status command
multiple times and reduce tuning latency.
Change-Id: Ib7fa5a8acbbffd9662617a357d221b36494a98b9
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Don't clear io pad power switch setting when 3V support is faked.
This bit has to be cleared for allowing IO pad to switch to 3V when
Vccq is really configured to 3V. But in case of faking 3V where we
configure Vccq to 1.8V only, we shouldn't clear this bit.
Change-Id: Ib1a9a2eb7189e161e22c8baf588453b3f2632eb7
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Without this fix the MMC may incorrectly set the CAPS for the SD card.
Change-Id: Ia4be2e78453663818cfd18deb9a590ec80423bca
Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
While executing tuning in case CMD19 fails, the driver sends CMD13
multiple times to ensure the card is ready to receive the next tuning
command. If this status command fails with CRC error, it will trigger
tuning. This will result in back to back tuning multiple times.
To avoid this situation, ignore CRCs error generated with CMD13 while
executing tuning.
Change-Id: Ife338768264ebebebc655fe11874e905abdf7482
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=U7IH
-----END PGP SIGNATURE-----
Merge 4.4.71 into android-4.4
Changes in 4.4.71
sparc: Fix -Wstringop-overflow warning
dccp/tcp: do not inherit mc_list from parent
ipv6/dccp: do not inherit ipv6_mc_list from parent
s390/qeth: handle sysfs error during initialization
s390/qeth: unbreak OSM and OSN support
s390/qeth: avoid null pointer dereference on OSN
tcp: avoid fragmenting peculiar skbs in SACK
sctp: fix src address selection if using secondary addresses for ipv6
sctp: do not inherit ipv6_{mc|ac|fl}_list from parent
tcp: eliminate negative reordering in tcp_clean_rtx_queue
net: Improve handling of failures on link and route dumps
ipv6: Prevent overrun when parsing v6 header options
ipv6: Check ip6_find_1stfragopt() return value properly.
bridge: netlink: check vlan_default_pvid range
qmi_wwan: add another Lenovo EM74xx device ID
bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
ipv6: fix out of bound writes in __ip6_append_data()
be2net: Fix offload features for Q-in-Q packets
virtio-net: enable TSO/checksum offloads for Q-in-Q vlans
tcp: avoid fastopen API to be used on AF_UNSPEC
sctp: fix ICMP processing if skb is non-linear
ipv4: add reference counting to metrics
netem: fix skb_orphan_partial()
net: phy: marvell: Limit errata to 88m1101
vlan: Fix tcp checksum offloads in Q-in-Q vlans
i2c: i2c-tiny-usb: fix buffer not being DMA capable
mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read
HID: wacom: Have wacom_tpc_irq guard against possible NULL dereference
scsi: mpt3sas: Force request partial completion alignment
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/radeon: Unbreak HPD handling for r600+
pcmcia: remove left-over %Z format
ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430
slub/memcg: cure the brainless abuse of sysfs attributes
drm/gma500/psb: Actually use VBT mode when it is found
mm/migrate: fix refcount handling when !hugepage_migration_supported()
mlock: fix mlock count can not decrease in race condition
xfs: Fix missed holes in SEEK_HOLE implementation
xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
xfs: fix over-copying of getbmap parameters from userspace
xfs: handle array index overrun in xfs_dir2_leaf_readbuf()
xfs: prevent multi-fsb dir readahead from reading random blocks
xfs: fix up quotacheck buffer list error handling
xfs: support ability to wait on new inodes
xfs: update ag iterator to support wait on new inodes
xfs: wait on new inodes during quotaoff dquot release
xfs: fix indlen accounting error on partial delalloc conversion
xfs: bad assertion for delalloc an extent that start at i_size
xfs: fix unaligned access in xfs_btree_visit_blocks
xfs: in _attrlist_by_handle, copy the cursor back to userspace
xfs: only return -errno or success from attr ->put_listent
Linux 4.4.71
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit f5f968f2371ccdebb8a365487649673c9af68d09 upstream.
The stingray SDHCI hardware supports ACMD12 and automatically
issues after multi block transfer completed.
If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen
on multi block read command with below error message:
Got data interrupt 0x00000002 even though no data
operation was in progress.
This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable
ACM12 support in SDHCI hardware and suppress spurious interrupt.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: b580c52d58 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When echo values to debugfs entry force_error, unclocked
register access error would be detected. This change fixes
it by making sure the host is powered up and host clock is
ticking before access force event register for error
interrupt status.
Change-Id: I995523d64de36cd4872209db4a558aa83103fbb3
Signed-off-by: Can Guo <cang@codeaurora.org>
In resume_scaling, the host current clock is compared with max clock
of the card to adjust the current-scaling clock.
If max clock supported by the card is more than the max clock that the
host can support, then the above-mentioned comparison is resulting in
setting the current-scaling clock to scale-down clock frequency even
though current host clock is at the maximum clock. This will lead to
skipping of scaling down to lower clock in low load use-cases. So clock
would remain at max clock till next time clock is scaled up and then
scaled down.
To prevent this scenario, compare the host current clock with max clock
that host can be scaled-up instead of max clock of the card.
Change-Id: Ibbed4bb374f1cbb5aee21cfca4e7e97d8f999d51
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Initialize the clock scaling frequency table with the platform specific
frequencies while preparing it. So that the frequencies supported by
the card can be compared against the frequencies supported by the
platform and then the table can be updated with the optimal frequencies
to match with both card and platform.
Without resetting these values to default values, this table contains
the frequencies updated for the last used card. These old values would
be used instead of platform-specific values to compare against the
frequencies of the newly inserted card. This can result in limiting
the max frequency to a lower frequency than what actually card can support.
Say if an high-speed card is used first and then a ultra-high-speed card,
the max scaling frequency would get set to the max of high-speed card
instead of max of the ultra-high-speed card.
Change-Id: I09a36e36c189e1d1fc317d798a0e3ff899f4e560
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Use a separate table to store the platform specific clock-scaling
frequencies.
The generic table where these frequencies used to be stored, would
get updated (in some cases) during clock scaling initialization.
But when a new card is inserted (In the case of a removable card),
the frequencies supported by the card should be compared against the
platform specific frequencies.
By storing these values in a separate table, these values would
remain intact and this table can be used for initializing the
generic table during clock-scaling initialization.
Change-Id: I5729f18a975f849bc2965a946473a9cdbd81e94a
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
These are all driver changes needed for disablement of
CONFIG_CC_OPTIMIZE_FOR_SIZE. CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
is enabled by default once CONFIG_CC_OPTIMIZE_FOR_SIZE is disabled.
Change-Id: Ia46a1f24e8a082a29ea6151e41e6d3a85a05fd4f
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Sridhar Parasuram <sridhar@codeaurora.org>
UHS-I SD cards support SDR104 mode which runs the SD card interface
clock upto 208 MHz. But we may see repeated CRC errors in SDR104
with some SDCC controllers. If this happens, commit <aafc430b36f3>
("mmc: sd: reduce the bus speed in case of multiple CRC errors") would
reinit the card to lower speed (SDR50) hoping that CRC error
rate would reduce at lower clock speed (100MHz for SDR50). As the error
may happen for any cmd, this change tries to fix several other paths -
clock scaling, mmc_rescan, non-data commands error path.
Change-Id: I8ccbbf7e330cde3862d9660d3be4d67fb00d97ca
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
We have seen that host controller's clock tuning circuit may go out of sync
if controller clocks are gated. To workaround this issue, we are now
triggering the retuning of tuning circuit once clocks are ungated.
Change-Id: Id2db1cb4829fbb1af4f8c4e463d1e16c0f45e590
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
During shutdown of sdhc drivers, power off notification (PON) is sent
to eMMC device. But it doesn't prevent the clock scaling framework
from kicking in and sending commands to card after PON is sent. So
exit clock scaling framework of sdhc before PON is sent.
Change-Id: Ibfe097732042458965db529f235a7fd28cfabaab
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
When resume clock scaling is not possible because there is no devfreq
framework, it is not an error. So avoid printing an error and return
success. This is necessary in certain scenarios like during shutdown
where we unregister the clock scaling devfreq.
Change-Id: Ib37eabdcdbbb58a336ee87220e5758bb559625af
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
In case of emmc5.0 cards where HS400 mode and CMD5(awake) partial
init is enabled -> mmc_partial_init is broken and gives below errors.
Fix this by adding calibration logic in case of HS400 mode.
NOTE: In HS400 mode tuning is only performed once during bootup (in
HS200 mode).
Post to that it is always DLL calibration which is performed (in
system/runtime resume).
So even for below issue since timing is already changed using
cached_ios, then do the calibration using ->execute_tuning.
<dmesg errors w/o patch>
root@msm8996:/ # [ 76.011036] mmc0: mmc_runtime_suspend:
[ 77.315903] mmc0: mmc_runtime_resume:
[ 77.367866] mmc0: mmc_partial_init: starting partial init
[ 77.376225] mmc0: mmc_test_awake_ext_csd: mmc_get_ext_csd failed
(-110)
[ 77.382190] mmc0: mmc_partial_init: done partial init (-110)
[ 77.387536] mmc0: _mmc_resume: awake failed (-110), fallback to full
init
[ 77.394405] mmc0: mmc_init_card:
[ 77.402762] mmc0: mmc_init_card: mmc_send_op_cond() fails -110
[ 77.407573] mmc0: MMC card re-init failed rc = -110 (retries = 3)
[ 77.507261] mmc0: _mmc_resume: awake failed (-110), fallback to full
init
[ 77.513293] mmc0: mmc_init_card:
<dmesg with patch>
[ 74.002624] mmc0: mmc_runtime_resume:
[ 74.056089] mmc0: mmc_partial_init: starting partial init
[ 74.067143] mmc0: mmc_partial_init: done partial init (0)
Change-Id: I0e55efb7863b75bd584843c3fc920c845996eb5c
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
While using the sysfs entry for getting the different bit values
of EXT_CSD register, it is returned by sprintf(). But sprintf() has
been deprecated, that's why replace with safe function snprintf().
By using this patch, PAGE_SIZE(4Kb) is the max number of characters
store in a buffer.
Change-Id: Ifb3dc39e8d3728094fff10c7e761dc19fdfaa854
Signed-off-by: Siba Prasad <sibap@codeaurora.org>
Uninitialized key_index local variable in sdhci_msm_ice_cmdq_cfg() would
be passed as it is to sdhci_msm_ice_hci_update_cmdq_cfg()
/sdhci_msm_ice_update_cfg() when request is not valid. So initialize
this variable with right value.
Without this change, its causing KW warning.
Change-Id: Ibf2f3973e8e2143b303196133758534846437b46
Signed-off-by: Siba Prasad <sibap@codeaurora.org>
On 4.4 kernel, 'commit 364549ddc2 ("mmc: core: Remove
redundant ->power_restore() callback for MMC")' removed
power_restore callback for MMC since mmc_reset is
implemented. Hence use reset instead of power_restore in
mmc_cmdq_hw_reset. Also modify the caller function mmc_cmdq_hw_reset
to properly use the mmc_reset.
Change-Id: Ia06d579401b6a083b164dff7a253d1eb3caef1a3
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
The eMMC HW reset may be implemented either via the host ops ->hw_reset()
callback or through DT and the eMMC pwrseq. Additionally some eMMC cards
don't support HW reset.
To allow a reset to be done for the different combinations of mmc hosts
and eMMC/MMC cards, let's implement a fallback via trying a regular power
cycle. This improves the mmc block layer retry mechanism of failing I/O
requests.
Change-Id: I5cafd54327cde22ea9599543382f1b294272a42c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
[Ulf: Rewrote changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Git-commit: 4e6c71788d6bb0e5438fc9211fa6e52dcca01474
Git-repo: git://git.linaro.org/people/ulf.hansson/mmc.git
[vviswana@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
* refs/heads/tmp-e4528dd:
Linux 4.4.65
perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race
ping: implement proper locking
staging/android/ion : fix a race condition in the ion driver
vfio/pci: Fix integer overflows, bitmask check
tipc: check minimum bearer MTU
netfilter: nfnetlink: correctly validate length of batch messages
xc2028: avoid use after free
mnt: Add a per mount namespace limit on the number of mounts
tipc: fix socket timer deadlock
tipc: fix random link resets while adding a second bearer
gfs2: avoid uninitialized variable warning
hostap: avoid uninitialized variable use in hfa384x_get_rid
tty: nozomi: avoid a harmless gcc warning
tipc: correct error in node fsm
tipc: re-enable compensation for socket receive buffer double counting
tipc: make dist queue pernet
tipc: make sure IPv6 header fits in skb headroom
ANDROID: uid_sys_stats: fix access of task_uid(task)
BACKPORT: f2fs: sanity check log_blocks_per_seg
Linux 4.4.64
tipc: fix crash during node removal
block: fix del_gendisk() vs blkdev_ioctl crash
x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions
hv: don't reset hv_context.tsc_page on crash
Drivers: hv: balloon: account for gaps in hot add regions
Drivers: hv: balloon: keep track of where ha_region starts
Tools: hv: kvp: ensure kvp device fd is closed on exec
kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
powerpc/kprobe: Fix oops when kprobed on 'stdu' instruction
ubi/upd: Always flush after prepared for an update
mac80211: reject ToDS broadcast data frames
mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for DDR50 card
ACPI / power: Avoid maybe-uninitialized warning
Input: elantech - add Fujitsu Lifebook E547 to force crc_enabled
VSOCK: Detach QP check should filter out non matching QPs.
Drivers: hv: vmbus: Reduce the delay between retries in vmbus_post_msg()
Drivers: hv: get rid of timeout in vmbus_open()
Drivers: hv: don't leak memory in vmbus_establish_gpadl()
s390/mm: fix CMMA vs KSM vs others
CIFS: remove bad_network_name flag
cifs: Do not send echoes before Negotiate is complete
ring-buffer: Have ring_buffer_iter_empty() return true when empty
tracing: Allocate the snapshot buffer before enabling probe
KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyrings
KEYS: Change the name of the dead type to ".dead" to prevent user access
KEYS: Disallow keyrings beginning with '.' to be joined as session keyrings
ANDROID: sdcardfs: Call lower fs's revalidate
ANDROID: sdcardfs: Avoid setting GIDs outside of valid ranges
ANDROID: sdcardfs: Copy meta-data from lower inode
Revert "Revert "Android: sdcardfs: Don't do d_add for lower fs""
ANDROID: sdcardfs: Use filesystem specific hash
ANDROID: AVB error handler to invalidate vbmeta partition.
ANDROID: Update init/do_mounts_dm.c to the latest ChromiumOS version.
Revert "[RFC]cgroup: Change from CAP_SYS_NICE to CAP_SYS_RESOURCE for cgroup migration permissions"
Conflicts:
drivers/md/Makefile
Change-Id: I8f5ed53cb8b6cc66914f10c6ac820003b87b8759
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
When erase DCMD commands fail, a completion notification may get raised
by host controller for the task in addition to error interrupt. This
can result in the done function of mmc request getting called twice
and release the clock twice and mess up the clock request counter. The
done function should be called only once for DCMD commands except flush
commands.
Change-Id: Ie3a96e48ca98872cf686049eb5caa060f143f9cb
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
If any discard requests fails, the mmc driver should not cause kernel
panic. The error handling and informing block layer about error will be
done by completion context.
Change-Id: I0c88ad851ad12c392a557bcb94d3b21dfc62d1f8
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
mmc clock scaling can be disabled/enabled through sysfs.
The present logic in this path deregisters/registers with devfreq
every time. Instead of this, we can simply suspend/resume the clock
scaling when requested for disabling/enabling clock scaling.
This patch updates the mentioned logic.
With original logic, observed deadlock between devfreq registration
and cmdqd thread in low memory conditions. The updated logic fixes
this deadlock condition aswell.
Change-Id: Ifee1ffbe24b13b8f5dc1c9f0579ce9ddf4b4faf3
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
