Driver fails to load FW for sparrow D0 devices in some cases.
Fix this by returning correct value from wil_fw_verify_file_exists
when D0 FW file is not detected for any reason.
Change-Id: I11f4e63c70f0f269372e780b3659d981924c8963
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 4d4f8132f72b78d1260ec9afa94c3b44deb12adf
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
The 11ad spec requires 11ad devices to be able to receive 8KB
packets over the air. Currently this is only possible by
loading the driver with mtu_max=7912 but this also forces
a smaller block ACK window size which reduces performance
for stations which transmit normal sized packets (<2KB).
Fix this problem as follows:
1. Add a module parameter rx_large_buf that when set,
will allocate 8KB RX buffers regardless of mtu_max
setting.
2. When receiving block ACK request agree to any window
size not above our maximum, regardless of the mtu_max setting.
This means if the other side transmits small packets (2KB)
it can still set up block ACK with a large window size,
and get better performance.
Change-Id: I8d18d9306d2546b54125b77df82c984878d0f84f
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 52a457020a89158f4eb886544165dc162ca9a35e
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
The power save profile is set to default state in case of FW reset,
regardless of the state before the reset took place.
Fix this by saving the current power save profile and restore it
in case of FW reset.
Change-Id: I9bcf8c4a60b72851631e25bf33a8335cffb2644f
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 8b068c032a5cbe6f80168e0ecf2c9625c8d14d90
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
[merez@codeaurora.org: fix trivial merge conflicts]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Communication with FW must be done before wil->status
is initialized in order to properly handle cases where
communication with FW halts during reset sequence.
Change-Id: Ia9b74143b45ae3c83a36a7c2f18b16794e5a2c57
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 82e9f646555442d63e47155171592ee790275ea3
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
This reverts commit 566b44214c (smb138x:
introduce support for smb1355).
This is not required since smb1355 support is moved to its own driver.
Change-Id: Ibad8595c09a865e273adb6f30d6a75f931220131
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
This reverts commit 0f0e36134d ("smb138x:
use chg src bit to disable parallel charger)
This is not required, since smb1355 support is moved to its own driver.
Change-Id: I1bd454030d29195f03be132d167ec8294169b9d5
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Support faking input current limited state. This is very helpful
in testing/debugging the software based vbus changing algorithms.
Change-Id: I7cf548c94397ee680c9d65343c49ec7b16873e88
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Add POWER_SUPPLY_PROP_REAL_TYPE property for usb_psy to present its real
charger type. POWER_SUPPLY_PROP_TYPE in usb_psy is always set to
POWER_SUPPLY_TYPE_USB_PD for healthd to recognize it as an AC charger.
Also add usb_port_psy with POWER_SUPPLY_TYPE_USB type is added for healthd
to recognize it as an USB host. Their ONLINE properties will be updated
according to the VBUS status, type-c mode and real charger type.
With this type being set statically, update the usb phy and pd policy
engine code to look at real type.
Change-Id: I90aa69325cc82b09dfb513c0eeecbc61e092a57f
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Current driver implementation uses global variables to create
minidump elf header.
Move all elf global variables into a structure, and also replace
'msm_minidump_enabled' API with 'minidump_enabled' global variable.
And also add minidump_table address in elf, which would be useful
for parsers to get memory dump table addresses without vmlinux symbols.
Change-Id: I8829d88ce234179f429ae9537a3582df794c2cdf
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Current implementation uses pr_info to print error messages.
Update driver prints log level with pr_err instead of
pr_info, and also update with proper error number for
minidump table update failure return.
Change-Id: I27667715c71b361b9ee0f7856c94242d3ca21014
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
We recently renamed CONFIG_UID_CPUTIME, but didn't update all the
defconfigs.
Change-Id: Ic52f904d6ada3d0e32a8278ec95f7b34b29f96b9
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix the compilation issue seen due to the regulator framework
changes from 3.10 to 4.4 kernel. Also remove the redundant error
messages during the memory allocation failures.
Change-Id: I4887c2d3acaff562fb41e6c2eaeb2c1ef2c1bde5
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
During Mini dump collection, cache dump needs extra memory
and time hence disable it in perf builds.
Change-Id: I68aae6edf676c27b8443fdcc88ece05fa3a26748
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
After cold boot calibration WLAN FW send pin connect result to
platform driver through qmi indication message. To avoid uninitialized
access of pin connect result structure member initialize it properly.
CRs-Fixed: 2042000
Change-Id: I5654583e890f9ee67ddcc632aecd9ecb8a160062
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
This patch helps dump the full 64k per ring preemption
record to GPU snapshot which is collected during GPU
recovery step. We use the general object snapshot section
type to store these records and we only collect the preemption
records if preemption was going to kick in, which is when
the number of rings is greater than one.
Change-Id: I1872bc14c6b39c8c4963ce9c98e96b03cbfec907
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
On 4.4 kernel, 'commit 364549ddc2 ("mmc: core: Remove
redundant ->power_restore() callback for MMC")' removed
power_restore callback for MMC since mmc_reset is
implemented. Hence use reset instead of power_restore in
mmc_cmdq_hw_reset. Also modify the caller function mmc_cmdq_hw_reset
to properly use the mmc_reset.
Change-Id: Ia06d579401b6a083b164dff7a253d1eb3caef1a3
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
The eMMC HW reset may be implemented either via the host ops ->hw_reset()
callback or through DT and the eMMC pwrseq. Additionally some eMMC cards
don't support HW reset.
To allow a reset to be done for the different combinations of mmc hosts
and eMMC/MMC cards, let's implement a fallback via trying a regular power
cycle. This improves the mmc block layer retry mechanism of failing I/O
requests.
Change-Id: I5cafd54327cde22ea9599543382f1b294272a42c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
[Ulf: Rewrote changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Git-commit: 4e6c71788d6bb0e5438fc9211fa6e52dcca01474
Git-repo: git://git.linaro.org/people/ulf.hansson/mmc.git
[vviswana@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
This is snapshot of the OnSemi NCP6335D driver as of msm-3.10
'commit 156ba1726643 ("regulator: onsemi-ncp6335d: Add i2c retry logic")'.
Change-Id: I4cf0acd272fcf498462d4397385cd62f144eadf8
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
MHI host and related drivers provide communication between
host and external modem. Enable it.
CRs-Fixed: 2041725
Change-Id: I1fbdfa7f17d158c1b6a33eb14497add495454bd1
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
Added new debugfs files/nodes to perform basic validation of the
per-buffer IO coherent dma-mapping that was recently implemented.
Also, added a node to print out the PTE for a given IOVA.
Nodes added:
dma_attach
dma_map
dma_unmap
dma_atos
virt_addr
pte
Change-Id: I041ab5f4e37e50dd3f58e2def3fdd3125a60629c
Signed-off-by: Sudarshan Rajagopalan <sudaraja@codeaurora.org>
