Enable important kernel logs which are essential for cold boot debug.
Remove unnecessary log for normal behavior.
CRs-Fixed: 1013082
Change-Id: I5234f0511fa1c81072e740386e90e07f5e813dd0
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Currently, standalone mode is treated as a mode along with other
modes, LCD and AMOLED. Rather than keeping it like that, LCD and
AMOLED mode configurations should be allowed along with the way
LAB and IBB modules are controlled, i.e. standalone or dual.
Remove the standalone mode from the list of modes and keep it as
a configurable parameter via device tree. This way, LCD and
AMOLED modes can be configured along with the way LAB/IBB needs
to be controlled (dual or standalone).
Add support for parent supply to LABIBB device so that LAB and
IBB regulators can vote for MBG when operating in standalone
mode.
CRs-Fixed: 996961
Change-Id: I56882e3a5a01b017e1ba9cd63ab36933a3d469e7
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
This reverts commit 0324b74b39 ("regulator: labibb: avail of
simpler regulator registration api").
LABIBB regulator driver still needs to obtain init_data from
the device tree not just for the regulator name but it is for
a subsequent change which will pass the parent supply name via
init_data to register with the regulator framework. Hence bring
it back.
Since of_get_regulator_init_data() is brought back, we need to
pass rdesc to that function as the number of arguments got
changed.
CRs-Fixed: 1008400
Change-Id: I027a9ddbbbf6ff0ba7886151e5336d190ac3ce25
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
On newer AMOLED panels the second SWIRE command is expected to
control the AVDD voltage. However, the PMI8950/PMI8994 IBB module
interprets this command for VDISN and incorrectly reduces its voltage.
Add DT properties 'qcom,skip-2nd-swire-cmd' to skip the second
SWIRE command and 'qcom,swire-2nd-cmd-delay' to explicitly specify
the delay between the first and second SWIRE command.
CRs-Fixed: 938038
Change-Id: I617a8490784efd760651b3ec8780cc4fd4b17bae
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
As part of SSR IPA driver code, Filtering and Routing Q6 tables
are being cleaned by pointing to empty tables.
This is done via DMA_SHARED_MEM IPA immediate command to change
SRAM tables pointers. Today code send one command per tables, but
all are chained in single transaction. This will hit the chain
size limitation defined by GSI IPA_IF TLV size.
Change the code to send the commands in smaller chains.
CRs-Fixed: 1012322
Change-Id: I03e9e92c2e01d1fece7e13dd412ea6128210f1fb
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Clients of VADC_HC and BTM include reading voltage phone
power, system thermistors for thermal mitigation such as
msm_therm, case_therm, XO therm. Add the supported VADC
and BTM channels for the msmcobalt platforms.
Change-Id: I87d0b7c8280a57b88a9b9e7c6a2710e4694a2c0b
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Need to enable clk_mmss_mnoc_ahb_clk before turning on the ahb_clk,
as there is a core fsm dependency between these clocks.
CRs-Fixed: 1008505
Change-Id: I9c87fee27c6a6ef875100c9fc1b9d0cb7c14a2b5
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
The BTM (Battery temperature module) peripheral driver
on the PMIC (Power management IC) supports threshold
monitoring and notifies clients when thresholds are crossed.
PMCOBALT supports refreshed BTM peripheral register interface
and the driver uses compatible property qpnp-adc-tm-hc to
distinguish using the refreshed peripheral. The external
client interface with the driver remains the same. Updates
include handling the interrupt when the thresholds are
crossed,programming the threholds and configuring
the hardware based on the refreshed design.
BTM peripheral needs the VADC_HC peripheral to compute the
gain/offset that are used to reverse compute the threhold
values to ADC code. Some of the reverse computation API's
such as calculating thermistor thresholds require the
gain and offset values before computing the ADC code to
be programmed. This requires modification to the existing
calibration API in the VADC_HC driver to calculate
the reference calibration points and store these values
for clients to use in the reverse computation
Change-Id: I989cfa4f40e7f1671f04dfa9d4c3fe2ccbbc44ab
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
VBIF/Hysteresis registers have to be setup for mdss module
of msmcobalt. Add default values in the device tree.
Change-Id: I4f106a39529f5e77591431bc3b4883a16d7b37f1
Signed-off-by: Sushil Chauhan <sushilchauhan@codeaurora.org>
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
The driver currently invokes the apid handler (periph_handler()) once it
sees that the summary status bit for that apid is set.
However the hardware is designed to set that bit even if the apid
interrupts are disabled. The driver should check whether the apid is
indeed enabled before calling the apid handler.
CRs-Fixed: 1001770
Change-Id: I1415c41ec99ca4b767392ea3443691760f967953
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
The cleanup_irq() was meant to clear and mask interrupts that were
left enabled in the hardware but there was no interrupt handler
registered for it. Add an error print when it gets invoked.
CRs-Fixed: 1001770
Change-Id: Iccf0daadeb82b0fca29829424439ac225e2b3b88
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
The current code uses handle_level_irq flow handler even if the trigger
type of the interrupt is edge. This can lead to missing of an edge
transition that happens when the interrupt is being handled. The level
flow handler masks the interrupt while it is being handled, so if an edge
transition happens at that time, that edge is lost.
Use an edge flow handler for edge type interrupts which ensures that the
interrupt stays enabled while being handled - at least until it triggers
at which point the flow handler sets the IRQF_PENDING flag and only then
masks the interrupt. That IRQF_PENDING state indicates an edge transition
happened while the interrupt was being handled and the handler is called
again.
CRs-Fixed: 1001770
Change-Id: Id2554c9e6ed79188fa1b64728be464bda45f07ec
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Usage of %p exposes the kernel addresses, an easy target to
kernel write vulnerabilities. With this patch currently
%pK prints only Zeros as address. If you need actual address
echo 0 > /proc/sys/kernel/kptr_restrict
CRs-Fixed: 987011
Change-Id: I6c79f82376936fc646b723872a96a6694fe47cd9
Signed-off-by: Azam Sadiq Pasha Kapatrala Syed <akapatra@codeaurora.org>
Add new UFS clocks to support enabling/disabling the hardware
dynamic gating for their corresponding branch clocks.
CRs-Fixed: 1012355
Change-Id: I4836ad8a775b0ec0375e37d27fcbe380e661a7b2
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Add a new hw_ctl_clk type to allow clock clients to enable
hardware dynamic gating of the clock branch.
Clients should use the clk_enable API on a separate hw_ctl_clk
clock structure to set this bit. Vice-versa for clearing it.
It is mandatory that the clients call clk_enable on the actual
branch clock before enabling the hw_ctl_clk clock.
CRs-Fixed: 1012355
Change-Id: I24e78353fa07f537bafc322dba6b1ffac913cd1d
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Gladiator error driver depends on the ATB clocks to be voted.
Previously, clock voting is done after writing to gladiator
registers.
CRs-Fixed: 1011314
Change-Id: I4d18273c6fc63baf58db1a778a1aaf3cb55e4824
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Add more detailed log to help debug when the ELF segments relocatable bit
is not set and pil_init_segment bails out.
Change-Id: Id8d941e69b70f1bcf709cedc969aa0500be92039
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
The v0.12 format adds three new fields:
uint32_t chip_family;
uint32_t raw_device_family;
uint32_t raw_device_number;
CRs-Fixed: 1013110
Change-Id: I1699ee96c65809a46331f94938c12fc1dd4d5384
Signed-off-by: Se Wang (Patrick) Oh <sewango@codeaurora.org>
Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
As per recommendation update the emergency hotplug threshold
for MSMcobalt to 105C from 70C.
CRs-Fixed: 1010111
Change-Id: I69a5583e4e15499c54ce5b2ab0fe0538de303391
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Configure thermal driver to do low voltage restriction for CX,
APSS and graphics rails, when temperature goes below 5 degree C.
This restriction will be cleared if the tsens temperature goes
above 10 degree C.
CRs-Fixed: 1010111
Change-Id: I36a1ba6adb9ce847ae552d904dff1bbd0ce3cb77
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Configure the limits hardware with the interrupt to listen for.
limits hardware driver will interact with the trustzone to get
throttling information from the hardware.
CRs-Fixed: 1010120
Change-Id: I56a8396a12e9b96cbed554bb1aed5d6243e6240a
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
With the LMH-DCVSh hardware the frequency mitigation in
the HLOS is not needed. Remove the boot-up frequency mitigation
in KTM for msmcobalt.
CRs-Fixed: 1010111
Change-Id: I105e98968b911f08b67c4e686e74ae6f7555d7be
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
temperature sensor 1 maps to cpu1 and not pop_mem. Remove
the pop_mem alias name defined for temperature sensor 1
in msmcobalt.
CRs-Fixed: 1010111
Change-Id: I69803580c9f747a0e2e5effa43d33f7a9a0d4e73
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Enable the LMH hardware and the LMH interface driver.
LMH hardware driver interacts with the LMH hardware and
uses the interface driver to register with thermal core.
CRs-Fixed: 1010120
Change-Id: I2e6f6a181902bee7e3bcb0f366e6ee21f8a4c442
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Enable kernel thermal driver.
kernel thermal driver can monitor, mitigate and provide interface
to thermal-engine to mitigate.
CRs-Fixed: 1010111
Change-Id: I02b4bc9cf66b2734be99c986d4a200f604145e0a
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Define the three LMh SW override values per cluster to be used
by the OSM device.
Change-Id: I6279cdbc92d4e0d5786854722474e1dfb14e7198
CRs-Fixed: 1009097
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
To ensure stable operation, it is necessary to place LMh SW override
votes when setting the new rate of the power and performance
CPU clocks. Add support for parsing these values from Device Tree
and programming them in clk_set_rate().
Change-Id: I60d90d546f155edb6c13c46e6c59c75e95848d6c
CRs-Fixed: 1009097
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Update CSC 10 bit YUV2RGB matrix table with appropriate values to
avoid any color conversion issues.
Change-Id: Iaf740873a6814cd9211acf4de4042c7cefecd64d
CRs-Fixed: 997593
Signed-off-by: Ramkumar Radhakrishnan <ramkumar@codeaurora.org>
Add align function to align the values to non power of 2 and align
yuv bitstream plane size and stride appropriately.
Change-Id: I40695e9e7a99fe7c814d26fa7b5205370b7f9f64
CRs-Fixed: 997601
Signed-off-by: Ramkumar Radhakrishnan <ramkumar@codeaurora.org>
LMH lite driver allocates DMA memory for getting the
sensor list from trustzone. DMA memory is not needed for
this operation, so use dynamic memory.
CRs-Fixed: 1010120
Change-Id: Ia7ef920a0f34334e49d76efc5ba233aa58aeb273
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Thermal core framework allows reading negative temperature and to
support that, thermal core APIs will read temperature in integer.
Inline with thermal core changes, modify the parameters to read
temperature to integer from signed long.
CRs-Fixed: 1010120
Change-Id: I975c11aa4e63e01ee3274a577b51b37c1c0f78cd
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
The permissions of /proc/iomem currently are -r--r--r--. Everyone can
see its content. As iomem contains information about the physical memory
content of the device, restrict the information only to root.
Change-Id: If0be35c3fac5274151bea87b738a48e6ec0ae891
CRs-Fixed: 786116
Signed-off-by: Biswajit Paul <biswajitpaul@codeaurora.org>
Signed-off-by: Avijit Kanti Das <avijitnsec@codeaurora.org>
In some cases modem will delay USB uplink pipe
for flow control. This will happen regardless of
tethering protocol. This change sends a QMI message
to modem to remove the delay on USB pipe in case
of USB cable disconnect.
CRs-Fixed: 1009199
Change-Id: I42cd716dcb87b814256a81418fecdff020f37d9d
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Add WCN3990 slimbus slave device tree to support
bluetooth and FM audio.
Change-Id: I15a0abe365555a6695a7317e4d9cfae13a56c49e
Signed-off-by: Sungjun Park <sjpark@codeaurora.org>
Create a new file for hdmi panel related functionalities
for a cleaner approach. Move all the video, infoframe and
timing related programming to hdmi panel. Expose its
functionalities for other modules. Register the panel with
hdmi transmitter core so that it can access and program it.
Change-Id: Iff1cb13d7b42b6ecfe6fd1fc88a111875c3d6cfa
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
The DP RCGs exported by the MMSS clock controller (MMSS-CC)
can be sourced out of the DP PLL which is outside the MMSS-CC. Set up
these external clock sources to point to the DP PLL clocks.
CRs-Fixed: 1009740
Change-Id: Ia8f60ba711770c26e5b5919d2c39d7986403ece6
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Change the feature flag to compile rndis_ipa
on cobalt target with msm-4.4 kernel, also
fix the compile warnings.
Change-Id: I82d3dd00e003d8eab63ca6bcc3bb91d51f122606
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
List all the resources needed by the MDSS DP PLL device and add the
corresponding device node for msmcobalt. The DP PLL is the source for
all the branch clocks needed to drive pixel data over the DP interface.
CRs-Fixed: 1009740
Change-Id: I1a373a7602f8dbad3fb547690a87a28aea73aadd
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Add support for new Display-port PLL clock driver to handle
different DP panel resolutions in msmcobalt. Add separate files
to support this new PHY PLL block.
CRs-Fixed: 1009740
Change-Id: Ic282c7e14fc6e23f4d044cb6a58249bdb4c8c2d8
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Set the primary display interface as the DSI device and the preferred
primary panel to be nt35597 dual-DSI (non-DSC) panel on msmcobalt CDP.
CRs-Fixed: 1000724
Change-Id: I8caa21c7b6a5f1e57cbd4c2bffeaa34e1e59d9c2
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
MSMCOBALT supports SLIMBUS_7 RX/Tx and SLIMBUS_8 Tx ports.
Add these ports to the CPU DAI list for passing to machine
driver.
Change-Id: I91306af6a2376fc76d51c62497e9723e6ec716e1
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Support for SLIMBUS_7 and SLIMBUS_8 Rx/Tx ports added to MSM audio
drivers. Add the right devices to probe/register these ports with
kernel at device bootup.
Change-Id: Id28b3d2fc5db4ec88ddbfa20b36047804d1fbdb6
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
New sequence print functions doesn't return error on overflow.
Use the new API to check for overflow and then return error
from LMH interface driver.
CRS-FIxed: 1010120
Change-Id: I12c496f3c72398845a9039607b27112196afe38a
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
KTM has support for handling cluster with asynchronous cores within
a cluster. KTM can get the individual clock plans for the cores and
mitigate them separately. This feature is not supported in
hardware.
So remove the asynchronous cluster support from KTM.
CRs-Fixed: 1010111
Change-Id: I13348a16e2e1c11053cf5b99b921fd8ea65c7d89
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
When driver detects that there is a dynamic resolution change
mid-stream it will not activate dcvs.
CRs-Fixed: 1007339
Change-Id: Ia5e5b42598b7e32360267e42665a5ce3880aaeee
Signed-off-by: Rohit Kulkarni <rkulkarn@codeaurora.org>
In order to centralize IPA assert calls and add essential
data on assertion, replace some BUG calls in an ipa_assert wrapper.
CRs-fixed: 1006564
Change-Id: I6a9b679bb083c695908972b377e8779e2f1cca60
Signed-off-by: Amir Levy <alevy@codeaurora.org>
Incorrect voltage and temperature results are seen
during ADC reads from VADC_HC peripheral.
Fix setting the correct flag used to select the respective
peripherals scaling formula to return the correct voltage
and temperature readings for VADC_HC peripheral.
Change-Id: I6f4fe857996c8df996b6e4a0e4475a48740929fa
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
If process_open_event is delayed and glink has migrated to new transport,
process open event will be treated as a new open event and migration will
happen on fully open channel.
If channel is fully, open migration will not be allowed as client might
already be using the channel for communication.
Change-Id: I6c1760bc19f52e7d0c1c9834a72e2304f0ae28c8
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
