Support a new OSM sequence which optimizes the number of
instructions required to program MEM-ACC settings and
the APM configuration of the CPUSS. This frees up sufficent
space to implement the DxFSM workaround.
CRs-Fixed: 1043040
Change-Id: I9499497cb558efcf3c73e7145ce65d3f129be696
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Program architectural register 6 with the address of the SPM
core count hysteresis register and architectural register 7
with the up and down core-count SPM hysteresis values. The
sequencer uses this information to ensure stable operation
when CPU retention or power-collapse and cluster collapse
LPMs are enabled.
CRs-Fixed: 1045435
Change-Id: I5e41ce376c694736128ceb051db86f93467fdaea
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Since LowSVS and SVS frequencies share the same ACC settings,
map any frequency in the LowSVS to SVS range to the same ACC
level. By doing so, the OSM device need only support 3 levels
instead of 4 thus saving sequencer instruction space. Also,
update the ACC setting to ensure bit 31 of the last ACC register
in each cluster is set when running at LowSVS/SVS frequencies.
CRs-Fixed: 1021659
Change-Id: I322b9b57ec89f5cdc75336d83010ff89a6bb5726
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Define the APM threshold voltage to be used by the OSM device
to determine the correct APM supply selection for different
DCVS setpoints.
CRs-Fixed: 1021656 1030444
Change-Id: Iebeb45eaa2503bd5be19f00938d0dbec1163c5a5
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Add support to determine the APM threshold corner via open-loop
voltages in the VDD regulator OPP table. The threshold corner
is used by OSM to determine the APM supply for each DCVS setpoint.
The crossover corner is used by OSM to request a specific voltage
during the APM switch transition.
CRs-Fixed: 1021656 1030444
Change-Id: Iac04f6db8e85b3651a33b6c9bff667365cae891d
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Add support for a corner whose open-loop voltage corresponds to the
VDD supply voltage required during an APM switch transition. This
corner is requested by OSM hardware to the CPRh controller when
the VDD supply must be set to a specific voltage to ensure a stable
APM switch procedure. Define a crossover corner of 880 mV for both
VDD_APC CPR devices.
CRs-Fixed: 1021656
Change-Id: Icf4b640ec2c330b0d9721d3494297e2d8445c9b6
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Enable SMMU on IPA3 and put in stage1-bypass mode to
not do the memory mapping.
Change-Id: Id2811c67a423c82201993b3119647a3d4caf4517
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
This is the initial commit from thirt party project.
Git-commit: bedea8a0819fc95acd0222e21e61203c8a08bb16
Git-repo: https://github.com/synaptics-touch/synaptics-dsx-i2c/
Change-Id: I892bc03122b096b43fc7f6b757b1161470597ddb
Signed-off-by: Alexandra Chin <alexandra.chin@tw.synaptics.com>
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
(cherry picked from commit 7d4470e29ce77e62acc14a21210e88207e4692b5)
Build kryo-l2-accessors only for MSM8996. This will avoid
compilation errors while building for 32-bit.
Change-Id: I3433623797abbefc5f19991c215260d1df11e42a
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Currently on msm-4.4 kernel, MSM8996 clock files are built when
ARCH_QCOM is enabled. Compile 8996 clock files only when
ARCH_MSM8996 is enabled, to avoid any issue when compiling for
other targets.
Change-Id: I58440ae6cf7f02b7137312c38219efeaccf06b58
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
This is the reference driver source code for the msg21xx series.
Signed-off-by: Bruce Ding <bruce.ding@mstarsemi.com>
Signed-off-by: mstar-touch <bruce.ding@mstarsemi.com>
Git-commit: c4cdbf1ae326b8745f5e50f044d23aa8e3d3e131
Git-repo: https://github.com/mstar-touch/msg21xx
Change-Id: Ia9cbfac5dc6e1b74f47bf13dbafaacc2624ee4fd
[maol@codeaurora.org: keep the mstar original code without any
change in this commit]
Signed-off-by: Mao Li <maol@codeaurora.org>
(cherry picked from commit 2ce52642057a25fca6337826533d4fbfddede290)
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
IT7258 touchscreen driver creates a character device which is
not used by anyone. Remove this dead code
Change-Id: Ied8a0048d8af17fa593c1970cabb572aac338786
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
This is the reference driver source code V1.8 for the GT9XX series.For
this first commit just copy binary, the second commit decompress the
binary and the third commit upgrade the version. We just need the newest
version, so Squashed the following commits:
commit 31915760747230826fa474fbb5b06a70b103c7e7
Author: Andrew Huang <andrew@goodix.com>
Date: Thu Jun 27 10:06:56 2013 +0000
This is the official reference driver source code V1.8 for the GT9XX series CTP controller,release for CIENET.
Signed-off-by: Andrew Huang <andrew@goodix.com>
git-svn-id: http://gtp-drivers-for-android.googlecode.com/svn//drivers@15 4d552555-e8e2-8f43-36d7-85641c3b7a2e
commit 82f70eaf58b0996e9f488b170f81a107642d4df8
Author: unknowtree@gmail.com <unknowtree@gmail.com>
Date: Thu Jun 6 02:58:58 2013 +0000
git-svn-id: http://gtp-drivers-for-android.googlecode.com/svn//drivers@7 4d552555-e8e2-8f43-36d7-85641c3b7a2e
commit 5c42b80f40a9731ac45d4e04a7a7528367f713e7
Author: unknowtree@gmail.com <unknowtree@gmail.com>
Date: Tue Jun 4 08:53:01 2013 +0000
git-svn-id: http://gtp-drivers-for-android.googlecode.com/svn//drivers@5 4d552555-e8e2-8f43-36d7-85641c3b7a2e
Change-Id: I30420fc51fe1bb153c36342e607539e5cd74de61
Signed-off-by: Pan Fang <fangpan@codeaurora.org>
(cherry picked from commit ab45aab306d8b8d16619bc02f35465fb8d6ff066)
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
This is the reference driver source code of it7258 touchscreen driver.
Signed-off-by: Alfred Deng <Alfred.Deng@ite.com.tw>
Git-commit: 3852a7ccce89c17ec3c4165acf9c81753c940104
Git-repo: git://github.com/ite-touch/touchscreen-driver
Change-Id: Ic1eab3ba79b8e8e5c259bb92f2692fd0db5fc8d3
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
(cherry picked from commit c25c3f1a0f29d7989b7d7058da74e465665bf279)
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
The MDSS clock drivers were not getting compiled due to an extra 'y', fix
the same.
CRs-Fixed: 1041122
Change-Id: I21e62361f40eb654c369048d01e158d4b96dd551
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Currently power supply name is passed to get the battery profile
in of_batterydata_get_best_profile(). This creates a dependency
of waiting for the driver that has the power supply class device.
Improve this by passing the battery id directly to the API. This
way, getting battery id will be the responsibility of caller.
CRs-Fixed: 1043798
Change-Id: I7a8c2b2fcc9b43e2e858114f7312fccf96dc3f78
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Vote for bandwidth after clocks are enabled. For bandwidth
voting clocks need to be on.
CRs-Fixed: 1044777
Change-Id: I9be1ee26419c082cda6351ef6d5aeedc6e17de55
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
Add a dummy clock provider that registers a simple callback that
in turn always returns the dummy clock for any clk_get call. This is useful
for unimplemented clocks.
Change-Id: I08fcb174fd0e0c49f8069e106b48597bcdfe847d
Signed-off-by: Taniya Das <tdas@codeaurora.org>
