Currently our driver is notifying ETIMEDOUT to PMIC
incase of floating charger. Consider if we are inserting
an SDP charger slowly that time also we will detect
it as floating charger then also we are notifying
ETIMEDOUT irrespective of current that is notified from
gadget driver. Hence notify charging current properly
if enumeration happens even in case of
floating charger so that PMIC can update real charger
type to SDP
Signed-off-by: Sai Krishna Juturi <jsaikrishna@codeaurora.org>
Change-Id: Ibeeeafac0834c9df7099a3f0bad274ddb393de47
It is virtual clock frontend driver which communicates
with host backend clock service/driver over HABMM. It
only supports msm8996 virtual platform currently.
Change-Id: Icfee28c301fa4a583b45e5d364432535643eb9b7
Signed-off-by: Zhiqiang Tu <ztu@codeaurora.org>
Entering SNK_Ready or SRC_Ready state from usbpd_set_state()
is somewhat terminal as it is the end state of a contract
negotiation. If there was a previous pending VDM message
waiting to be sent, for example the start of a Discovery which
was queued prior to a PR Swap, it would not get sent. Check for
this and enqueue usbpd_sm once again so that it could be sent
out. Otherwise, start the Discovery process in case we are
in DFP mode, and do that for SNK_Ready as well.
Change-Id: I4516ccb0deec8cdabdb62d539d7d2b66dc23f1ee
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add android-verity support so that the system image is verified by
the kernel during the boot time. Also set the x509 key file to be
used for verification.
Change-Id: I17ffc2944ef9af556d9fdc05d62734de384dc27c
Signed-off-by: Binoy Jayan <bjayan@codeaurora.org>
NTN_CLK_SYNC line should be set low before bringing Neutrino out
of reset for msm8996 agave board and auto CDP board.
Change-Id: I7b213a7dad2dbdedd3fe42a88972dc36cbf2e5b5
Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org>
In diagfwd_peripheral_exit() free the memory associated with
early_init_info.
Change-Id: I862b6d806d67dad38316f1608827a4bf6f5a691f
Signed-off-by: Sreelakshmi Gownipalli <sgownipa@codeaurora.org>
Disable L1 and L1ss PCIe low power modes for msm8996 CV2X
since it causes problems with WLAN (RC0) and not supported
by Neutrino Ethernet (RC1).
Change-Id: I7d9358a2cb5921f5e5d5da858faec553197063ee
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Set properties of the esoc driver for MDM shutdown and reset
time intervals for msm8996 CV2X.
Change-Id: Ic86f6b441b369a3ea4845425930724d5e6fed149
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Convert the timeout and shutdown intervals to be read from
the device tree and set default values in case no option is
provided.
Change-Id: I90efb5910ddf1667db5cde79f46a4a94da1668ec
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Reject driver reinit request when WLAN FW is down as FW
is in a bad state and can't communicate with host driver.
CRs-Fixed: 2153375
Change-Id: Id16cbfc05984091d61b18c98f7397baa871f82b4
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Register ops to store the gtk rekey data from the wlan
utility(wpa_supplicant) and configure the GTK offload
during wow suspend.
If the wlan module in suspend state with wowlan mode
this feature adds support to prevent the device to wakeup
from sleep state on gtk rekey failure in wlan firmware.
CRs-Fixed: 2150959
Change-Id: I968acfe65bd082d37c855f89d4460a09c055ffd8
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Validate the userspace wlan control cmd data, info and length
before copy into wcnss driver buffer. Avoid unnecessary string
manipulation and use kernel defined format specifier to print
wlan MAC address.
CRs-Fixed: 2149331
Change-Id: Ib59fdcc0e6b84cdd73972dcb62b2c05e4741f5f7
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
With WARN_RATELIMIT lot of warning messages are
sometimes causing watchdog bite or spinlock lockup
(due to continuous logging). Thus change it to
pr_debug.
Change-Id: I2f0670bd20a39d289c105f9896e6fc509fb87de6
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
With USB Host pass through, touchscreen is available on gvm.
Change-Id: I129f2cc65e5d11a6d69e7afde13356a3bee98df6
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
Current CCID daemon is supporting TPDU level exhanges for CCID
communication. Hence report same in dwFeatures field of CCID class
descriptor.
Change-Id: If66a54bd74c76ccb417b202b224de5c79e9dfa05
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Reject regsiter_driver request when WLAN FW is already down as
WLAN FW is in a bad state and can't communicate with host driver.
Change-Id: I57ba839101f5c0a361e74060b18b45f87c71634c
CRs-Fixed: 2151726
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Check the validity of the pointer in user space that you intend to
access. access_ok function simply checks that the address is likely
in user space, not in the kernel.
Change-Id: I936f73a2c2029f9e7ca12cc8fc06d0698e6710c0
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
Add support to mount system & vendor partitions during early init
on msm8996.
Change-Id: I6b05edb8d17f192e1d8d9d5e1c0c33a3d1a7c441
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
When the thread processing blocked TA wakes up when listener
becames available, the listener may be unavailable again before
this thread grabs the global mutex, so make change to add a
while loop to check if listener available after wake up and hold
mutex.
Change-Id: Ib386faca7a44325142da1dc54e19a99f3173ec86
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
