* refs/heads/tmp-d63fdf6 Linux 4.4.120 MIPS: Implement __multi3 for GCC7 MIPS64r6 builds net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len xen/gntdev: Fix partial gntdev_mmap() cleanup xen/gntdev: Fix off-by-one error when unmapping with holes SolutionEngine771x: fix Ether platform data mdio-sun4i: Fix a memory leak xen-netfront: enable device after manual module load bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. can: flex_can: Correct the checking for frame length in flexcan_start_xmit() mac80211: mesh: drop frames appearing to be from us drm/ttm: check the return value of kzalloc e1000: fix disabling already-disabled warning xfs: quota: check result of register_shrinker() xfs: quota: fix missed destroy of qi_tree_lock IB/ipoib: Fix race condition in neigh creation IB/mlx4: Fix mlx4_ib_alloc_mr error flow s390/dasd: fix wrongly assigned configuration data led: core: Fix brightness setting when setting delay_off=0 bnx2x: Improve reliability in case of nested PCI errors tg3: Enable PHY reset in MTU change path for 5720 tg3: Add workaround to restrict 5762 MRRS to 2048 lib/mpi: Fix umul_ppmm() for MIPS64r6 ARM: dts: ls1021a: fix incorrect clock references scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error net: arc_emac: fix arc_emac_rx() error paths spi: atmel: fixed spin_lock usage inside atmel_spi_remove drm/nouveau/pci: do a msi rearm on init sget(): handle failures of register_shrinker() ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch ipv6: icmp6: Allow icmp messages to be looped back mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM f2fs: fix a bug caused by NULL extent tree hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers) ANDROID: keychord: Check for write data size Revert "binder: add missing binder_unlock()" Linux 4.4.119 binder: add missing binder_unlock() drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path usb: gadget: f_fs: Process all descriptors during bind usb: ldusb: add PIDs for new CASSY devices supported by this driver usb: dwc3: gadget: Set maxpacket size for ep0 IN drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA Add delay-init quirk for Corsair K70 RGB keyboards arm64: Disable unhandled signal log messages by default usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() x86/oprofile: Fix bogus GCC-8 warning in nmi_setup() iio: adis_lib: Initialize trigger before requesting interrupt iio: buffer: check if a buffer has been set up when poll is called cfg80211: fix cfg80211_beacon_dup scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info ip_tunnel: fix preempt warning in ip tunnel creation/updating ip_tunnel: replace dst_cache with generic implementation PCI: keystone: Fix interrupt-controller-node lookup powerpc/64s: Fix RFI flush dependency on HARDLOCKUP_DETECTOR netfilter: drop outermost socket lock in getsockopt() ANDROID: sdcardfs: Set num in extension_details during make_item Conflicts: drivers/usb/gadget/function/f_fs.c Change-Id: I594b9686fd64d4b62ebef4452d4f1ccca4f5a77b Signed-off-by: Srinivasarao P <spathi@codeaurora.org> |
||
---|---|---|
.. | ||
atm | ||
c67x00 | ||
chipidea | ||
class | ||
common | ||
core | ||
dwc2 | ||
dwc3 | ||
early | ||
gadget | ||
host | ||
image | ||
isp1760 | ||
misc | ||
mon | ||
musb | ||
pd | ||
phy | ||
renesas_usbhs | ||
serial | ||
storage | ||
usbip | ||
wusbcore | ||
Kconfig | ||
Makefile | ||
README | ||
usb-skeleton.c |
To understand all the Linux-USB framework, you'll use these resources: * This source code. This is necessarily an evolving work, and includes kerneldoc that should help you get a current overview. ("make pdfdocs", and then look at "usb.pdf" for host side and "gadget.pdf" for peripheral side.) Also, Documentation/usb has more information. * The USB 2.0 specification (from www.usb.org), with supplements such as those for USB OTG and the various device classes. The USB specification has a good overview chapter, and USB peripherals conform to the widely known "Chapter 9". * Chip specifications for USB controllers. Examples include host controllers (on PCs, servers, and more); peripheral controllers (in devices with Linux firmware, like printers or cell phones); and hard-wired peripherals like Ethernet adapters. * Specifications for other protocols implemented by USB peripheral functions. Some are vendor-specific; others are vendor-neutral but just standardized outside of the www.usb.org team. Here is a list of what each subdirectory here is, and what is contained in them. core/ - This is for the core USB host code, including the usbfs files and the hub class driver ("hub_wq"). host/ - This is for USB host controller drivers. This includes UHCI, OHCI, EHCI, and others that might be used with more specialized "embedded" systems. gadget/ - This is for USB peripheral controller drivers and the various gadget drivers which talk to them. Individual USB driver directories. A new driver should be added to the first subdirectory in the list below that it fits into. image/ - This is for still image drivers, like scanners or digital cameras. ../input/ - This is for any driver that uses the input subsystem, like keyboard, mice, touchscreens, tablets, etc. ../media/ - This is for multimedia drivers, like video cameras, radios, and any other drivers that talk to the v4l subsystem. ../net/ - This is for network drivers. serial/ - This is for USB to serial drivers. storage/ - This is for USB mass-storage drivers. class/ - This is for all USB device drivers that do not fit into any of the above categories, and work for a range of USB Class specified devices. misc/ - This is for all USB device drivers that do not fit into any of the above categories.