Add support for TX path COPP calibration according to
app type configuration
CRs-fixed: 1015476
Change-Id: I0bcbfadb0c1a22529863a5c4b8cc5c53a1028915
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Modify the clock_gcc dummy clock to use the real clock controller for all
global clock controller clients.
Change-Id: Iac989d3c9312654b599d8299206e5478ca454861
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add IMEM PIL entry to save relocatable address of images
loaded by PIL.
Change-Id: I79acd047c7e414ed19a2f992f8ff801b63c8a2ad
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
This reverts 'commit 7112993181 ("input: touchscreen: synaptics v1.1")'
This change is not needed in 4.4 kernel.
Change-Id: I89ab8f353bc04bc0a04d5f5a6993e8e8e5ebbd2e
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Currently, there is a delay of 20msec before raising OTG
current limit, which may be too long for some OTG devices and
cause unexpected issues.
Change it to 1ms or 2ms per HW timing.
Change-Id: Ie09a65e7974e2412af4add3b6f1e0aa20ee4a34b
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Set LAB's precharge time to max 500us to optimize the precharge
behavior as suggested in the hardware documentation.
CRs-Fixed: 1084297
Change-Id: I118f4254686caf498087847916b7710662ab31e7
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, some properties in LABIBB regulator driver are having
prefix "qpnp" which is not reflecting the vendor. Change it to
"qcom" to reflect the vendor name correctly and also match with
other DT properties.
CRs-Fixed: 1071971
Change-Id: I182dddc29f3d7c7b449b56ac7fb84e74061cf3a4
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
For LABIBB peripherals in pmicobalt, bootloader configures
LCD/AMOLED mode and SWIRE control based on a GPIO selector.
Hence, add support to configure them selectively.
While at it, fix the variable name used in read/write APIs to
reflect the address rather than base. Also use the pmic subtype
macros from qpnp-revid.h directly.
CRs-Fixed: 1071971
Change-Id: Ibbf3d432709eadf0808e062726804be6b2a065ee
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Lock out interrupts during issuing dummy request in timeout to prevent from
a potential deadlock happening.
Change-Id: I986d8c36c839a1dee23761465ad331ffc31dd6ac
CRs-Fixed: 1008319
Acked-by: Che-Min Hsieh <cheminh@qti.qualcomm.com>
Signed-off-by: Yasir Malik <ymalik@codeaurora.org>
Convert most of the pmfalcon stub-regulator devices to a
rpm-smd-regulator devices. This ensures that requests made for
these regulators are aggregated by the RPM processor along with
the requests from other processors.
Also, add a dummy gfx_vreg_corner regulator until the CPR node
is added.
While at it, rename all regulators names and add pm/pm2 prefix
to differentiate between regulators on multiple supported PMICs.
Also update all clients with new regulator phandles.
CRs-Fixed: 1077493
Change-Id: I95b17de5bf17b62096d2c9d60633b6b30768752a
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Since usleep_range provides better accuracy in
comparison to msleep. This helps in reducing the
latency of host bus resume.
Change-Id: Id22104b9e5b63153731df9eb55759de9a86128c6
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
A540v1 and v2 both need to enable the LMLOADKILL quirk for the
GPU.
CRs-Fixed: 1036444
Change-Id: I84243578a1ef2f9948f0c9a8c1c00dc6a31eb579
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
