Add the qcom,hw-timer-hz property and enable qcom,bimc-bwmon4
device for msmcobalt to be able to use the BWMON2 hardware
instead of the legacy BWMON hardware.
Change-Id: I1d1c2e5d2fcf705d8ffd527ec7434d90cc004834
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Numerous changes were introduced to various layers:
Block: removed dependency on selinux module for decision on bio merge
EXT4: Added feature controlled support for HW encryption
PFK: Major re-factoring, separation to eCryptfs and EXT4 sub-layers
Change-Id: I9256c8736e1c16175fe3f94733dda430ccc57980
Signed-off-by: Andrey Markovytch <andreym@codeaurora.org>
Goodix GT9xx touchscreen driver supports up to six groups of config
data and uses hardware GPIO configuration to select which one will
be used. This change allows these six config groups to be loaded
from devicetree.
Change-Id: I9dfd698e7084164688dd964ed914d5eecc75ecd3
Signed-off-by: Bingzhe Cai <bingzhec@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Remove the GDSC not present in msmfalcon and also remove few clocks which
are not required to be controlled from GDSC driver.
Change-Id: I284197693722912919c59ec26cfae5e382da787b
Signed-off-by: Taniya Das <tdas@codeaurora.org>
If the beat counts doesn't match during a SRAM read over IMA,
a retry is attempted using retry_once flag. This flag is not
cleared causing a continuous loop even if the beat counts match
again. Fix it.
CRs-Fixed: 1067180
Change-Id: Ie140740ce0374808a630a37d29888b646baa576f
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
The version 4 of the BIMC BWMON hardware now has provisions for
counting bytes transferred at a high sampling rate.
Modify the existing driver and governor algorithm to
take advantage of that.
Change-Id: I5080297aef7e310d5c1a19098c177ddecb729c25
Signed-off-by: Rohit Gupta <rohgup@codeaurora.org>
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Currently IPC Router does not queue larger size intents by default. It
also does not re-use larger size intents once queued. This causes some
performance impact for larger size message exchange.
Add limited number of larger size receive intents on demand and
re-use them.
CRs-Fixed: 1066173
Change-Id: I8b1ff2af7db2ca13671e31a9bce05329346bda10
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
This reverts commit 49fcea4ca0b6 ("defconfig: msm: enable common log for
msmcobalt")
Scam dump allocation is moved to watchdog driver so common log driver is
not required for perf defconfig.
Change-Id: I7c189e3e4182348c05b5e9573c9039a04c70bf62
Signed-off-by: Shashank Mittal <mittals@codeaurora.org>
Use list_for_each_entry_safe to safely delete mappings while
iterating over the mappings list.
CRs-Fixed: 1067012
Change-Id: I5326ee8e58d291b1d9b07649b87632d7e9102e0d
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Add support to allocate memory for scan dumps for msmcobalt.
This memory can be used to save CPU scan dumps at the time of
a crash.
Change-Id: I325bc1cb97b5a1ef2c00374b00d967e258a90a48
Signed-off-by: Shashank Mittal <mittals@codeaurora.org>
Allocate memory for scan dump collection along with CPU context
allocation.
This will help in debugging crashes very early during boot up.
Change-Id: Icbb2a60683ecca303cbd48576d80d0a765610c8f
Signed-off-by: Shashank Mittal <mittals@codeaurora.org>
Not all memory are DMA'able. See DMA-API-HOWTO.txt. The dummy hash
request input buffer is changed to be acquired from coherent memory
to kzalloc().
Change-Id: If6961217df08bcf0506eedacb07874dfafd7c1ca
CRs-Fixed: 1064055
Acked-by: Che-Min Hsieh <cheminh@qti.qualcomm.com>
Signed-off-by: Sivanesan Rajapupathi <srajap@codeaurora.org>
Inside glink_scheduler_tx tx_info is not validated after tx operation
and taking spin lock, since there are two functions which can release
the reference for tx_info while glink_scheduler_tx thread is preempted.
These functions are ch_purge_intent_lists and
ch_remove_tx_pending_remote_done.
Validate tx_info from tx_active list after tx operation and taking
spin lock.
CRs-Fixed: 1061565
Change-Id: I80c64d66625b9fe9205e8ffaa7cfc851e06fcb94
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Introduce bus topology for msmfalcon. This is a representation
of the bus connections in the SOC and allows the bus driver
to setup bandwidth requests from clients for the paths desired.
Change-Id: If58f6c5b48a023ba7f9212758d71930116156008
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Introduce new master/slave ids to identify
the corresponding master/slaves for the
bandwidth aggregation done by the bus driver.
Change-Id: Ibed309284b47ba3f22ccbac45c750f3e366ec40e
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Client driver may disconnect pipe while some data is still
pending on the pipe and might not need IRQ for that data. Current
implementation might result in crash in case disconnect and IRQ happens
on same pipe in parallel. Implement lock to avoid pipe disconnect
while IRQ is in progress for that pipe and viceversa.
Change-Id: Icf43c0a18cfc1644270b684a792632a6c81f1797
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Add device tree info for Secure Processor Subsystem Utilities driver.
Change-Id: I2657705131fcbbcc63a723b3badb3f43135b4408
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
On msm-4.4, conditional paths are not supported for
supply widgets. Using SND_SOC_DAPM_MUX instead of
using Switches to connect to the native supply.
CRs-Fixed: 1066167
Change-Id: If015dbad0e168e41f1c8c86b502d4cf5fb592045
Signed-off-by: Meng Wang <mwang@codeaurora.org>
commit 70a7fb80e85a ("regulator: core: Fix nested locking of supplies")
Commit fa731ac7ea04 ("regulator: core: avoid unused variable warning")
introduced a subtle change in how supplies are locked. Where previously
code was always locking the regulator of the current iteration, the new
implementation only locks the regulator if it has a supply. For any
given power tree that means that the root will never get locked.
On the other hand the regulator_unlock_supply() will still release all
the locks, which in turn causes the lock debugging code to warn about a
mutex being unlocked which wasn't locked.
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: fa731ac7ea04 ("regulator: core: avoid unused variable warning")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 70a7fb80e85ae7f78f8e90cec3fbd862ea6a4d4b
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[ashayj@codeaurora.org: Fix the regulator bug which was re-introduced by
commit f145f4]
CRs-Fixed: 1065539
Change-Id: I376a6412bb65a1e193647eab54ad993df4c2c24f
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
WCD934X audio codec supports idle detection over headphone
path to reduce power consumption when the audio signal
level is low. Add support to enable headphone idle detection
in the wcd934x codec driver.
CRs-fixed: 1066588
Change-Id: I8d67fa4055898db31b47f87b6659484aeb08f58f
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Explicitly send device disconnect notification to client
so that client can disable audio streams. This will in turn
enable sound usb driver to release usb device and notify device
removal to user-space. User-space will clean up audio session.
Without this change sound usb driver is blocking usb device
release till audio streams are disabled. However, audio streams
are only disabled when user-space cleans up audio session on usb
device removal which is blocked. This change is trying to fix
this deadlock condition by notifying device disconnect to clients
explicitly.
Change-Id: I7e5a8aca84a7a620bb61eb0ace8a6b6c622f89de
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Propagate subsystem state received from SSR notification back to the
service notifier clients so they can know if subsystem crashed.
CRs-Fixed: 1066446
Change-Id: I5418d298290623ac66a2b64108a1f5dab034e5f3
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
The current api which performs the clock reset is moved to use the reset
framework, so support the changes in ufs driver for the same. The reset
framework requires to get reset handle and perform assert/deassert of the
resets.
Change-Id: I78d833639772cf541e563cbf9fae1aa75ec6a7da
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Disable clocks in reverse order of the way you enable them so as to
avoid clock stuck_on warnings.
CRs-Fixed: 1066446
Change-Id: I071df5d5848878e5ff7b514bf9089c011a0c6a69
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
Create codec entry for wcd934x codec so that userspace can retrieve
the codec info.
CRs-Fixed: 1063367
Change-Id: Ie846b5edf1d8aaecce5140986dad8da69d608d5a
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
As there are many hardware version of wcd934x codec. Add version
check in the code so that userspace can get the version info.
CRs-Fixed: 1063367
Change-Id: Ia320380d568426c2d7a414a832980a556ff27f0f
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Send SUBSYS_BEFORE_SHUTDOWN notification to clients before doing
graceful shutdown so that clients can do their end of housekeeping.
CRs-Fixed: 1066446
Change-Id: I77b248c51914651aea4b27d7c5a3d5d784b1e542
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
When kernel.perf_event_open is set to 3 (or greater), disallow all
access to performance events by users without CAP_SYS_ADMIN.
Add a Kconfig symbol CONFIG_SECURITY_PERF_EVENTS_RESTRICT that
makes this value the default.
This is based on a similar feature in grsecurity
(CONFIG_GRKERNSEC_PERF_HARDEN). This version doesn't include making
the variable read-only. It also allows enabling further restriction
at run-time regardless of whether the default is changed.
https://lkml.org/lkml/2016/1/11/587
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Git-repo: https://android.googlesource.com/kernel/common.git
Git-commit: 012b0adcf7299f6509d4984cf46ee11e6eaed4e4
[d-cagle@codeaurora.org: Resolve trivial merge conflicts]
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
Bug: 29054680
Change-Id: Iff5bff4fc1042e85866df9faa01bce8d04335ab8
perf_event_paranoid was only documented in source code and a perf error
message. Copy the documentation from the error message to
Documentation/sysctl/kernel.txt.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20160119213515.GG2637@decadent.org.uk
[ Remove reference to external Documentation file, provide info inline, as before ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bug: 29054680
Change-Id: I13e73cfb2ad761c94762d0c8196df7725abdf5c5
Git-repo: https://android.googlesource.com/kernel/common.git
Git-commit: b79154b8f7702f6e8a56ce9f1355f841cec16c37
[d-cagle@codeaurora.org: Resolve trivial merge conflicts]
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
The stack object “map” has a total size of 32 bytes. Its last 4
bytes are padding generated by compiler. These padding bytes are
not initialized and sent out via “nla_put”.
Change-Id: I41f4745f24720c7af5ab08dc4274224d7fe4dcfe
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-repo: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git
Git-commit: 5f8e44741f9f216e33736ea4ec65ca9ac03036e6
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
If cpr3_ctrl_clear_cpr4_config() returns an error at the
beginning of the cpr3_regulator_measure_aging() function, then
goto cleanup is called. After that, the *_restore values are
written back into hardware registers. Unfortunately, these
*_restore variables are uninitialized in this code path.
Correct this issue.
Change-Id: I906613a00137925c9903ac6c01771c459594864f
CRs-Fixed: 1066407
Signed-off-by: David Collins <collinsd@codeaurora.org>
A discrepancy between cpu_online_mask and cpuset's effective_cpus
mask is inevitable during hotplug since cpuset defers updating of
effective_cpus mask using a workqueue, during which time nothing
prevents the system from more hotplug operations. For that reason
guarantee_online_cpus() walks up the cpuset hierarchy until it finds
an intersection under the assumption that top cpuset's effective_cpus
mask intersects with cpu_online_mask even with such a race occurring.
However a sequence of CPU hotplugs can open a time window, during which
none of the effective CPUs in the top cpuset intersect with
cpu_online_mask.
For example when there are 4 possible CPUs 0-3 and only CPU0 is online:
======================== ===========================
cpu_online_mask top_cpuset.effective_cpus
======================== ===========================
echo 1 > cpu2/online.
CPU hotplug notifier woke up hotplug work but not yet scheduled.
[0,2] [0]
echo 0 > cpu0/online.
The workqueue is still runnable.
[2] [0]
======================== ===========================
Now there is no intersection between cpu_online_mask and
top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at
this moment can cause following:
Unable to handle kernel NULL pointer dereference at virtual address 000000d0
------------[ cut here ]------------
Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable]
Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98
task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000
PC is at guarantee_online_cpus+0x2c/0x58
LR is at cpuset_cpus_allowed+0x4c/0x6c
<snip>
Process taskset (pid: 1420, stack limit = 0xffffffc06e124020)
Call trace:
[<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58
[<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c
[<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac
[<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac
[<ffffffc000085cb0>] el0_svc_naked+0x24/0x28
The top cpuset's effective_cpus are guaranteed to be identical to
cpu_online_mask eventually. Hence fall back to cpu_online_mask when
there is no intersection between top cpuset's effective_cpus and
cpu_online_mask.
CRs-fixed: 1058529
Change-Id: I83ee4619feff2ca7452119c9baecb6ffde755287
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: cgroups@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Tejun Heo <tj@kernel.org>
EQ bias is enabled in of msmcobalt version 2 csiphy.
Differentiate this setting with new version 2 camera dt file.
CRs-Fixed: 1050172
Change-Id: I5781453f2b2a81b9cf5f7fb643e021b53879583e
Signed-off-by: Viswanadha Raju Thotakura <viswanad@codeaurora.org>
Provide client_id in ind_register QMI request message so that
WLAN FW can identify different clients.
CRs-Fixed: 1065341
Change-Id: I2d79daa72fb87a7d3c0818563a88e94f36af48b8
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
