Move target specific initialization and setup into target
specific init functions. The change is required to port the GPU
driver to support future generation GPUs.
CRs-Fixed: 1053516
Change-Id: I808e247669fab61a6a64131858fe2f9e19754242
Signed-off-by: George Shen <sqiao@codeaurora.org>
Fix the following issues found in static analysis:
- missing blank lines after declarations
- unnecessary return in a void function
- exporting world writable files is usually an error
- block comments use * on subsequent and trailing lines
- Add DT binding description and vendor prefixe for the
driver.
- Add Linux Foundation copyright markings.
Change-Id: Id2ed9a6d4e31bd2acd3185bf7ef9c78f8a41cf36
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
Signed-off-by: Vevek Venkatesan <vevekv@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Change-Id: Ie366894e9e89707fa2950a7ffbfe4e93059a19a3
Signed-off-by: Lawrence Liao <lawrence_liao@pixart.com>
(cherry picked from commit dfc4349a8aa02bb0b7b0639ad5368a5c85f6520f)
Git-commit: dfc4349a8aa02bb0b7b0639ad5368a5c85f6520f
Git-repo: https://github.com/PixartOpen/pixart-sensor-db810-linux-driver
[shjain@codeaurora.org: removed below listed files from original
commit as they are not needed and to resolve trivial merge conflicts:
1. arch/arm/boot/dts/qcom/apq8094-dragonboard.dtsi
2. arch/arm/boot/dts/qcom/msm8994-pinctrl.dtsi
3. arch/arm/boot/dts/qcom/msm8994.dtsi
4. drivers/input/misc/Makefile
5. drivers/input/misc/ots_pat9125/Makefile
Remove the unused pieces of algorithm from the reference
driver of Pixart PAT9125 Rotating side button.]
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
To support ADSP SVA on wcd934x, dedicated backend dailink needs
to be created. Add the dailink associating the specific cpu dai
and the MAD codec dai.
CRs-Fixed: 1070327
Change-Id: I4152d81e4e951216a8ecdd93562eb1740dbb962c
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
When WDSP has crashed, G-link link state is updated with
GLINK_LINK_STATE_DOWN and remote side channels are closed.
Handle the link state down notification from G-link and
close the channels from local side when remote disconnect
channel event occurs.
Change-Id: Id956256fbb3ea6b18a3685a34dcd1f9b16e71e92
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Call rdev_get_name() to obtain the name to use in the debug
consumer's regulator_get() call so that the debug consumer finds
the correct regulator when the name differs in the constraints
and desc structs.
Change-Id: Id6a47467cd118c89c8f58d1120381d4c64f8efee
CRs-Fixed: 1075693
Signed-off-by: David Collins <collinsd@codeaurora.org>
REVID peripheral supports reading FAB ID value. Add property
qcom,fab-id-valid to allow clients to access the FAB ID data
for PMICOBALT.
Change-Id: I66463cf3fa7b0fdeba4cb5ee1e34d27b5e736cfb
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
PMICOBALT supports reading the FAB ID from the REVID
peripheral. Add an optional property qcom,fab-id-valid
to check if support for FAB ID is available in the
REVID peripheral for the PMIC.
Change-Id: If8212618baa7533b008228a71740acf1d6c72a52
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Rotator HW cannot support 0 dimension of input and output image. During
V4L2 validation, it must reject any 0 size image format setting.
CRs-Fixed: 1073633
Change-Id: I503561677271c39894b7a6910fe8d9c5c25e9c28
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Added initial support for fine timing measurement(FTM)
and angle of arrival (AOA). These features allow a station
to get an accurate indoor location by measuring
distance (FTM) and azimuth/elevation (AOA) to one or more
stations/APs with a known location.
The following APIs are supported:
1. Get FTM/AOA capabilities, currently hard-coded for a
single-shot measurement to an associated AP
2. Start FTM session
3. Receive FTM results
4. Start standalone AOA measurement
5. Receive AOA results
Change-Id: I54ebc1bdff6ed7d91644165b16eb0a4240069321
CRs-Fixed: 1057307
Signed-off-by: Lior David <liord@codeaurora.org>
If the wait for global fails due to timeout then nothing after this
point is likely to work very well. Get GPU snapshot in addition to
BUG_ON(), to analyze the GPU fault.
CRs-Fixed: 1053780
Change-Id: I29930120a72a08533c859002f646af93e67c754f
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
