For pre power off event, we want to check for rotator IDLE status and
generate a timeout event logging if the rotator is still in BUSY state.
For post power on event, rotator is reset to default HW state. It is
necessary to synchronize the SW timestamp with the HW register location.
CRs-Fixed: 1066270
Change-Id: I1041141b8dc80db0baec7ffe71a5c2a7b41e2cbb
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Add support for new QMI IDL in IPA driver for new message
QMI_IPA_INSTALL_FILTER_RULE_EX_REQ_V01 which allows to send
at most 128 rules.
Change-Id: I886e40f597169939ce4598863fd80145743d8db7
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
During recovery, if another PD down notification received because
of crash then handle the case. If debug enabled then BUG_ON to
debug the second crash.
CRs-fixed: 1067873
Change-Id: I6e8e92ca0ee11830f933e198fea502c915d36e59
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
During recovery, if not able to force enable hardware clocks then
do top level reset only.
CRs-fixed: 1067868
Change-Id: Ie23ca022c94cd214a9e415e9fb774055cfaf881d
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
Remove panic on single bit cache error because single bit error
can be corrected.
Change-Id: Id14ffa45a1326e47adc847c012e9ac21c6954990
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Remove warn_on message since the required CPUMERRSR and L2MERRSR
info is already printed in the dmesg.
Change-Id: I2e93bcd1e84d43bc7a58af0be02d5337d936d4ee
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
tx_iface_clk and rx_iface_clk does not exist in newer version
of ufs-phy HW, hence remove the missing clk warnings for them.
Change-Id: Ic8dd3e9521159ce8da064da38cfa12e75f07209f
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
It is possible a variable will be accessed before
it is ever initialized. Properly initialize this
variable when it is declared.
Change-Id: Id1523786f1c87449ed3943f1726766dad6a4ade2
Signed-off-by: Tony Truong <truong@codeaurora.org>
As part of the PHY shut down sequence, current driver
disable the phy pmic regulators. This is not the
expected sequence, so make sure the pmic phy
regulators stay enabled.
Change-Id: Ia65a71347666ed9fa3f6bf92fe7c573638301254
Signed-off-by: Ingrid Gallardo <ingridg@codeaurora.org>
