* refs/heads/tmp-79f138a
Linux 4.4.107
ath9k: fix tx99 potential info leak
IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop
RDMA/cma: Avoid triggering undefined behavior
macvlan: Only deliver one copy of the frame to the macvlan interface
udf: Avoid overflow when session starts at large offset
scsi: bfa: integer overflow in debugfs
scsi: sd: change allow_restart to bool in sysfs interface
scsi: sd: change manage_start_stop to bool in sysfs interface
vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend
scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry
raid5: Set R5_Expanded on parity devices as well as data.
pinctrl: adi2: Fix Kconfig build problem
usb: musb: da8xx: fix babble condition handling
tty fix oops when rmmod 8250
powerpc/perf/hv-24x7: Fix incorrect comparison in memord
scsi: hpsa: destroy sas transport properties before scsi_host
scsi: hpsa: cleanup sas_phy structures in sysfs when unloading
PCI: Detach driver before procfs & sysfs teardown on device remove
xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real
xfs: fix log block underflow during recovery cycle verification
l2tp: cleanup l2tp_tunnel_delete calls
bcache: fix wrong cache_misses statistics
bcache: explicitly destroy mutex while exiting
GFS2: Take inode off order_write list when setting jdata flag
thermal/drivers/step_wise: Fix temperature regulation misbehavior
ppp: Destroy the mutex when cleanup
clk: tegra: Fix cclk_lp divisor register
clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
clk: mediatek: add the option for determining PLL source clock
mm: Handle 0 flags in _calc_vm_trans() macro
crypto: tcrypt - fix buffer lengths in test_aead_speed()
arm-ccn: perf: Prevent module unload while PMU is in use
target/file: Do not return error for UNMAP if length is zero
target:fix condition return in core_pr_dump_initiator_port()
iscsi-target: fix memory leak in lio_target_tiqn_addtpg()
target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
powerpc/ipic: Fix status get and status clear
powerpc/opal: Fix EBUSY bug in acquiring tokens
netfilter: ipvs: Fix inappropriate output of procfs
powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo
PCI/PME: Handle invalid data when reading Root Status
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
rtc: pcf8563: fix output clock rate
video: fbdev: au1200fb: Return an error code if a memory allocation fails
video: fbdev: au1200fb: Release some resources if a memory allocation fails
video: udlfb: Fix read EDID timeout
fbdev: controlfb: Add missing modes to fix out of bounds access
sfc: don't warn on successful change of MAC
target: fix race during implicit transition work flushes
target: fix ALUA transition timeout handling
target: Use system workqueue for ALUA transitions
btrfs: add missing memset while reading compressed inline extents
NFSv4.1 respect server's max size in CREATE_SESSION
efi/esrt: Cleanup bad memory map log messages
perf symbols: Fix symbols__fixup_end heuristic for corner cases
net/mlx4_core: Avoid delays during VF driver device shutdown
afs: Fix afs_kill_pages()
afs: Fix page leak in afs_write_begin()
afs: Populate and use client modification time
afs: Fix the maths in afs_fs_store_data()
afs: Prevent callback expiry timer overflow
afs: Migrate vlocation fields to 64-bit
afs: Flush outstanding writes when an fd is closed
afs: Adjust mode bits processing
afs: Populate group ID from vnode status
afs: Fix missing put_page()
drm/radeon: reinstate oland workaround for sclk
mmc: mediatek: Fixed bug where clock frequency could be set wrong
sched/deadline: Use deadline instead of period when calculating overflow
sched/deadline: Throttle a constrained deadline task activated after the deadline
sched/deadline: Make sure the replenishment timer fires in the next period
drm/radeon/si: add dpm quirk for Oland
fjes: Fix wrong netdevice feature flags
scsi: hpsa: limit outstanding rescans
scsi: hpsa: update check for logical volume status
openrisc: fix issue handling 8 byte get_user calls
intel_th: pci: Add Gemini Lake support
mlxsw: reg: Fix SPVMLR max record count
mlxsw: reg: Fix SPVM max record count
net: Resend IGMP memberships upon peer notification.
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
net: wimax/i2400m: fix NULL-deref at probe
writeback: fix memory leak in wb_queue_work()
netfilter: bridge: honor frag_max_size when refragmenting
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list
NFSD: fix nfsd_reset_versions for NFSv4.
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
net: bcmgenet: Power up the internal PHY before probing the MII
net: bcmgenet: power down internal phy if open or resume fails
net: bcmgenet: reserved phy revisions must be checked first
net: bcmgenet: correct MIB access of UniMAC RUNT counters
net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
net: initialize msg.msg_flags in recvfrom
userfaultfd: selftest: vm: allow to build in vm/ directory
userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE
md-cluster: free md_cluster_info if node leave cluster
usb: phy: isp1301: Add OF device ID table
mac80211: Fix addition of mesh configuration element
KEYS: add missing permission check for request_key() destination
ext4: fix crash when a directory's i_size is too small
ext4: fix fdatasync(2) after fallocate(2) operation
dmaengine: dmatest: move callback wait queue to thread context
sched/rt: Do not pull from current CPU if only one CPU to pull
xhci: Don't add a virt_dev to the devs array before it's fully allocated
Bluetooth: btusb: driver to enable the usb-wakeup feature
ceph: drop negative child dentries before try pruning inode's alias
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
USB: core: prevent malicious bNumInterfaces overflow
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
tracing: Allocate mask_str buffer dynamically
autofs: fix careless error in recent commit
crypto: salsa20 - fix blkcipher_walk API usage
crypto: hmac - require that the underlying hash algorithm is unkeyed
UPSTREAM: arm64: setup: introduce kaslr_offset()
UPSTREAM: kcov: fix comparison callback signature
UPSTREAM: kcov: support comparison operands collection
UPSTREAM: kcov: remove pointless current != NULL check
UPSTREAM: kcov: support compat processes
UPSTREAM: kcov: simplify interrupt check
UPSTREAM: kcov: make kcov work properly with KASLR enabled
UPSTREAM: kcov: add more missing includes
UPSTREAM: kcov: add missing #include <linux/sched.h>
UPSTREAM: kcov: properly check if we are in an interrupt
UPSTREAM: kcov: don't profile branches in kcov
UPSTREAM: kcov: don't trace the code coverage code
BACKPORT: kernel: add kcov code coverage
Conflicts:
Makefile
mm/kasan/Makefile
scripts/Makefile.lib
Change-Id: Ic19953706ea2e700621b0ba94d1c90bbffa4f471
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-2fea039
Linux 4.4.106
usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
Revert "x86/mm/pat: Ensure cpa->pfn only contains page frame numbers"
Revert "x86/efi: Hoist page table switching code into efi_call_virt()"
Revert "x86/efi: Build our own page table structures"
net/packet: fix a race in packet_bind() and packet_notifier()
packet: fix crash in fanout_demux_rollover()
sit: update frag_off info
rds: Fix NULL pointer dereference in __rds_rdma_map
tipc: fix memory leak in tipc_accept_from_sock()
more bio_map_user_iov() leak fixes
s390: always save and restore all registers on context switch
ipmi: Stop timers before cleaning up the module
audit: ensure that 'audit=1' actually enables audit for PID 1
ipvlan: fix ipv6 outbound device
afs: Connect up the CB.ProbeUuid
IB/mlx5: Assign send CQ and recv CQ of UMR QP
IB/mlx4: Increase maximal message size under UD QP
xfrm: Copy policy family in clone_policy
jump_label: Invoke jump_label_test() via early_initcall()
atm: horizon: Fix irq release error
sctp: use the right sk after waking up from wait_buf sleep
sctp: do not free asoc when it is already dead in sctp_sendmsg
sparc64/mm: set fields in deferred pages
block: wake up all tasks blocked in get_request()
sunrpc: Fix rpc_task_begin trace point
NFS: Fix a typo in nfs_rename()
dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0
lib/genalloc.c: make the avail variable an atomic_long_t
route: update fnhe_expires for redirect when the fnhe exists
route: also update fnhe_genid when updating a route cache
mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
kbuild: pkg: use --transform option to prefix paths in tar
EDAC, i5000, i5400: Fix definition of NRECMEMB register
EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
drm/amd/amdgpu: fix console deadlock if late init failed
axonram: Fix gendisk handling
netfilter: don't track fragmented packets
zram: set physical queue limits to avoid array out of bounds accesses
i2c: riic: fix restart condition
crypto: s5p-sss - Fix completing crypto request in IRQ handler
ipv6: reorder icmpv6_init() and ip6_mr_init()
bnx2x: do not rollback VF MAC/VLAN filters we did not configure
bnx2x: fix possible overrun of VFPF multicast addresses array
bnx2x: prevent crash when accessing PTP with interface down
spi_ks8995: fix "BUG: key accdaa28 not in .data!"
arm64: KVM: Survive unknown traps from guests
arm: KVM: Survive unknown traps from guests
KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset
irqchip/crossbar: Fix incorrect type of register size
scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
libata: drop WARN from protocol error in ata_sff_qc_issue()
kvm: nVMX: VMCLEAR should not cause the vCPU to shut down
USB: gadgetfs: Fix a potential memory leak in 'dev_config()'
usb: gadget: configs: plug memory leak
HID: chicony: Add support for another ASUS Zen AiO keyboard
gpio: altera: Use handle_level_irq when configured as a level_high
ARM: OMAP2+: Release device node after it is no longer needed.
ARM: OMAP2+: Fix device node reference counts
module: set __jump_table alignment to 8
selftest/powerpc: Fix false failures for skipped tests
x86/hpet: Prevent might sleep splat on resume
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
vti6: Don't report path MTU below IPV6_MIN_MTU.
Revert "s390/kbuild: enable modversions for symbols exported from asm"
Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA"
Revert "drm/armada: Fix compile fail"
mm: drop unused pmdp_huge_get_and_clear_notify()
thp: fix MADV_DONTNEED vs. numa balancing race
thp: reduce indentation level in change_huge_pmd()
scsi: storvsc: Workaround for virtual DVD SCSI version
ARM: avoid faulting on qemu
ARM: BUG if jumping to usermode address in kernel mode
arm64: fpsimd: Prevent registers leaking from dead tasks
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
media: dvb: i2c transfers over usb cannot be done from stack
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
drm: extra printk() wrapper macros
kdb: Fix handling of kallsyms_symbol_next() return value
s390: fix compat system call table
iommu/vt-d: Fix scatterlist offset handling
ALSA: usb-audio: Add check return value for usb_string()
ALSA: usb-audio: Fix out-of-bound error
ALSA: seq: Remove spurious WARN_ON() at timer check
ALSA: pcm: prevent UAF in snd_pcm_info
x86/PCI: Make broadcom_postcore_init() check acpi_disabled
X.509: reject invalid BIT STRING for subjectPublicKey
ASN.1: check for error from ASN1_OP_END__ACT actions
ASN.1: fix out-of-bounds read when parsing indefinite length item
efi: Move some sysfs files to be read-only by root
scsi: libsas: align sata_device's rps_resp on a cacheline
isa: Prevent NULL dereference in isa_bus driver callbacks
hv: kvp: Avoid reading past allocated blocks from KVP file
virtio: release virtio index when fail to device_register
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: ratelimit errors if incomplete messages are received
can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()
can: kvaser_usb: free buf in error paths
can: ti_hecc: Fix napi poll return value for repoll
BACKPORT: irq: Make the irqentry text section unconditional
UPSTREAM: arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections
UPSTREAM: x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text
UPSTREAM: kasan: make get_wild_bug_type() static
UPSTREAM: kasan: separate report parts by empty lines
UPSTREAM: kasan: improve double-free report format
UPSTREAM: kasan: print page description after stacks
UPSTREAM: kasan: improve slab object description
UPSTREAM: kasan: change report header
UPSTREAM: kasan: simplify address description logic
UPSTREAM: kasan: change allocation and freeing stack traces headers
UPSTREAM: kasan: unify report headers
UPSTREAM: kasan: introduce helper functions for determining bug type
BACKPORT: kasan: report only the first error by default
UPSTREAM: kasan: fix races in quarantine_remove_cache()
UPSTREAM: kasan: resched in quarantine_remove_cache()
BACKPORT: kasan, sched/headers: Uninline kasan_enable/disable_current()
BACKPORT: kasan: drain quarantine of memcg slab objects
UPSTREAM: kasan: eliminate long stalls during quarantine reduction
UPSTREAM: kasan: support panic_on_warn
UPSTREAM: x86/suspend: fix false positive KASAN warning on suspend/resume
UPSTREAM: kasan: support use-after-scope detection
UPSTREAM: kasan/tests: add tests for user memory access functions
UPSTREAM: mm, kasan: add a ksize() test
UPSTREAM: kasan: test fix: warn if the UAF could not be detected in kmalloc_uaf2
UPSTREAM: kasan: modify kmalloc_large_oob_right(), add kmalloc_pagealloc_oob_right()
UPSTREAM: lib/stackdepot: export save/fetch stack for drivers
UPSTREAM: lib/stackdepot.c: bump stackdepot capacity from 16MB to 128MB
BACKPORT: kprobes: Unpoison stack in jprobe_return() for KASAN
UPSTREAM: kasan: remove the unnecessary WARN_ONCE from quarantine.c
UPSTREAM: kasan: avoid overflowing quarantine size on low memory systems
UPSTREAM: kasan: improve double-free reports
BACKPORT: mm: coalesce split strings
BACKPORT: mm/kasan: get rid of ->state in struct kasan_alloc_meta
UPSTREAM: mm/kasan: get rid of ->alloc_size in struct kasan_alloc_meta
UPSTREAM: mm: kasan: remove unused 'reserved' field from struct kasan_alloc_meta
UPSTREAM: mm/kasan, slub: don't disable interrupts when object leaves quarantine
UPSTREAM: mm/kasan: don't reduce quarantine in atomic contexts
UPSTREAM: mm/kasan: fix corruptions and false positive reports
UPSTREAM: lib/stackdepot.c: use __GFP_NOWARN for stack allocations
BACKPORT: mm, kasan: switch SLUB to stackdepot, enable memory quarantine for SLUB
UPSTREAM: kasan/quarantine: fix bugs on qlist_move_cache()
UPSTREAM: mm: mempool: kasan: don't poot mempool objects in quarantine
UPSTREAM: kasan: change memory hot-add error messages to info messages
BACKPORT: mm/kasan: add API to check memory regions
UPSTREAM: mm/kasan: print name of mem[set,cpy,move]() caller in report
UPSTREAM: mm: kasan: initial memory quarantine implementation
UPSTREAM: lib/stackdepot: avoid to return 0 handle
UPSTREAM: lib/stackdepot.c: allow the stack trace hash to be zero
UPSTREAM: mm, kasan: fix compilation for CONFIG_SLAB
BACKPORT: mm, kasan: stackdepot implementation. Enable stackdepot for SLAB
BACKPORT: mm, kasan: add GFP flags to KASAN API
UPSTREAM: mm, kasan: SLAB support
UPSTREAM: mm/slab: align cache size first before determination of OFF_SLAB candidate
UPSTREAM: mm/slab: use more appropriate condition check for debug_pagealloc
UPSTREAM: mm/slab: factor out debugging initialization in cache_init_objs()
UPSTREAM: mm/slab: remove object status buffer for DEBUG_SLAB_LEAK
UPSTREAM: mm/slab: alternative implementation for DEBUG_SLAB_LEAK
UPSTREAM: mm/slab: clean up DEBUG_PAGEALLOC processing code
UPSTREAM: mm/slab: activate debug_pagealloc in SLAB when it is actually enabled
sched: EAS/WALT: Don't take into account of running task's util
BACKPORT: schedutil: Reset cached freq if it is not in sync with next_freq
UPSTREAM: kasan: add functions to clear stack poison
Conflicts:
arch/arm/include/asm/kvm_arm.h
arch/arm64/kernel/vmlinux.lds.S
include/linux/kasan.h
kernel/softirq.c
lib/Kconfig
lib/Kconfig.kasan
lib/Makefile
lib/stackdepot.c
mm/kasan/kasan.c
sound/usb/mixer.c
Change-Id: If70ced6da5f19be3dd92d10a8d8cd4d5841e5870
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-8a53962
Linux 4.4.105
xen-netfront: avoid crashing on resume after a failure in talk_to_netback()
usb: host: fix incorrect updating of offset
USB: usbfs: Filter flags passed in from user space
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: Increase usbfs transfer limit
USB: core: Add type-specific length check of BOS descriptors
usb: ch9: Add size macro for SSP dev cap descriptor
usb: Add USB 3.1 Precision time measurement capability descriptor support
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
usb: hub: Cycle HUB power when initialization fails
Revert "ocfs2: should wait dio before inode lock in ocfs2_setattr()"
net: fec: fix multicast filtering hardware setup
xen-netfront: Improve error handling during initialization
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
tcp: correct memory barrier usage in tcp_check_space()
dmaengine: pl330: fix double lock
tipc: fix cleanup at module unload
net: sctp: fix array overrun read on sctp_timer_tbl
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
NFSv4: Fix client recovery when server reboots multiple times
KVM: arm/arm64: Fix occasional warning from the timer work function
nfs: Don't take a reference on fl->fl_file for LOCK operation
ravb: Remove Rx overflow log messages
net/appletalk: Fix kernel memory disclosure
vti6: fix device register to report IFLA_INFO_KIND
ARM: OMAP1: DMA: Correct the number of logical channels
net: systemport: Pad packet before inserting TSB
net: systemport: Utilize skb_put_padto()
kprobes/x86: Disable preemption in ftrace-based jprobes
perf test attr: Fix ignored test case result
sysrq : fix Show Regs call trace on ARM
EDAC, sb_edac: Fix missing break in switch
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
spi: sh-msiof: Fix DMA transfer size check
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
selftests/x86/ldt_get: Add a few additional tests for limits
s390/pci: do not require AIS facility
ima: fix hash algorithm initialization
USB: serial: option: add Quectel BG96 id
s390/runtime instrumentation: simplify task exit handling
serial: 8250_pci: Add Amazon PCI serial device ID
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
bcache: recover data from backing when data is clean
bcache: only permit to recovery read error when cache device is clean
ANDROID: initramfs: call free_initrd() when skipping init
Conflicts:
drivers/usb/core/config.c
include/linux/usb.h
include/uapi/linux/usb/ch9.h
Change-Id: Ibada5100be12f3a1389461f7738ee2ecb0d427af
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-8bc4213
Linux 4.4.104
nfsd: Fix another OPEN stateid race
nfsd: Fix stateid races between OPEN and CLOSE
nfsd: Make init_open_stateid() a bit more whole
drm/i915: Prevent zero length "index" write
drm/i915: Don't try indexed reads to alternate slave addresses
NFS: revalidate "." etc correctly on "open".
mtd: nand: Fix writing mtdoops to nand flash.
drm/panel: simple: Add missing panel_simple_unprepare() calls
drm/radeon: fix atombios on big endian
Revert "drm/radeon: dont switch vt on suspend"
bcache: Fix building error on MIPS
eeprom: at24: check at24_read/write arguments
mmc: core: Do not leave the block driver in a suspended state
KVM: x86: inject exceptions produced by x86_decode_insn
KVM: x86: Exit to user-mode on #UD intercept when emulator requires
KVM: x86: pvclock: Handle first-time write to pvclock-page contains random junk
btrfs: clear space cache inode generation always
mm/madvise.c: fix madvise() infinite loop under special circumstances
mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()
x86/efi-bgrt: Replace early_memremap() with memremap()
x86/efi-bgrt: Fix kernel panic when mapping BGRT data
ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpio
x86/efi: Build our own page table structures
x86/efi: Hoist page table switching code into efi_call_virt()
x86/mm/pat: Ensure cpa->pfn only contains page frame numbers
ipsec: Fix aborted xfrm policy dump crash
netlink: add a start callback for starting a netlink dump
Documentation: tee subsystem and op-tee driver
tee: add OP-TEE driver
tee: generic TEE subsystem
dt/bindings: add bindings for optee
kernel.h: add u64_to_user_ptr()
ARM: 8481/2: drivers: psci: replace psci firmware calls
ARM: 8480/2: arm64: add implementation for arm-smccc
ARM: 8479/2: add implementation for arm-smccc
ARM: 8478/2: arm/arm64: add arm-smccc
UPSTREAM: net: xfrm: allow clearing socket xfrm policies.
Conflicts:
arch/arm64/kernel/arm64ksyms.c
arch/arm64/kernel/asm-offsets.c
arch/arm64/kvm/hyp/fpsimd.S
drivers/Kconfig
drivers/Makefile
drivers/firmware/psci.c
drivers/gpu/drm/msm/msm_gem_submit.c
drivers/mmc/core/bus.c
include/linux/arm-smccc.h
Change-Id: Ib22051f60c49ecf3bb7e18f9940ba9a4ac5143af
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-9fbf3d7
Linux 4.4.103
Revert "sctp: do not peel off an assoc from one netns to another one"
xen: xenbus driver must not accept invalid transaction ids
s390/kbuild: enable modversions for symbols exported from asm
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: rsnd: don't double free kctrl
netfilter: nf_tables: fix oob access
netfilter: nft_queue: use raw_smp_processor_id()
spi: SPI_FSL_DSPI should depend on HAS_DMA
staging: iio: cdc: fix improper return value
iio: light: fix improper return value
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
mac80211: Remove invalid flag operations in mesh TSF synchronization
drm: Apply range restriction after color adjustment when allocation
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
ath10k: set CTS protection VDEV param only if VDEV is up
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
ath10k: ignore configuring the incorrect board_id
ath10k: fix incorrect txpower set by P2P_DEVICE interface
drm/armada: Fix compile fail
net: 3com: typhoon: typhoon_init_one: fix incorrect return values
net: 3com: typhoon: typhoon_init_one: make return values more specific
net: Allow IP_MULTICAST_IF to set index to L3 slave
dmaengine: zx: set DMA_CYCLIC cap_mask bit
PCI: Apply _HPX settings only to relevant devices
RDS: RDMA: return appropriate error on rdma map failures
e1000e: Separate signaling for link check/link up
e1000e: Fix return value test
e1000e: Fix error path in link detection
PM / OPP: Add missing of_node_put(np)
net/9p: Switch to wait_event_killable()
fscrypt: lock mutex before checking for bounce page pool
sched/rt: Simplify the IPI based RT balancing logic
media: v4l2-ctrl: Fix flags field on Control events
cx231xx-cards: fix NULL-deref on missing association descriptor
media: rc: check for integer overflow
media: Don't do DMA on stack for firmware upload in the AS102 driver
powerpc/signal: Properly handle return value from uprobe_deny_signal()
parisc: Fix validity check of pointer size argument in new CAS implementation
ixgbe: Fix skb list corruption on Power systems
fm10k: Use smp_rmb rather than read_barrier_depends
i40evf: Use smp_rmb rather than read_barrier_depends
ixgbevf: Use smp_rmb rather than read_barrier_depends
igbvf: Use smp_rmb rather than read_barrier_depends
igb: Use smp_rmb rather than read_barrier_depends
i40e: Use smp_rmb rather than read_barrier_depends
NFC: fix device-allocation error return
IB/srp: Avoid that a cable pull can trigger a kernel crash
IB/srpt: Do not accept invalid initiator port names
libnvdimm, namespace: make 'resource' attribute only readable by root
libnvdimm, namespace: fix label initialization to use valid seq numbers
clk: ti: dra7-atl-clock: fix child-node lookups
clk: ti: dra7-atl-clock: Fix of_node reference counting
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
KVM: SVM: obey guest PAT
KVM: nVMX: set IDTR and GDTR limits when loading L1 host state
target: Fix QUEUE_FULL + SCSI task attribute handling
iscsi-target: Fix non-immediate TMR reference leak
fs/9p: Compare qid.path in v9fs_test_inode
fix a page leak in vhost_scsi_iov_to_sgl() error recovery
ALSA: hda/realtek - Fix ALC700 family no sound issue
ALSA: timer: Remove kernel warning at compat ioctl error paths
ALSA: usb-audio: Add sanity checks in v2 clock parsers
ALSA: usb-audio: Fix potential out-of-bound access at parsing SU
ALSA: usb-audio: Add sanity checks to FE parser
ALSA: pcm: update tstamp only if audio_tstamp changed
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ata: fixes kernel crash while tracing ata_eh_link_autopsy event
rtlwifi: fix uninitialized rtlhal->last_suspend_sec time
rtlwifi: rtl8192ee: Fix memory leak when loading firmware
nfsd: deal with revoked delegations appropriately
nfs: Fix ugly referral attributes
NFS: Fix typo in nomigration mount option
isofs: fix timestamps beyond 2027
bcache: check ca->alloc_thread initialized before wake up it
eCryptfs: use after free in ecryptfs_release_messaging()
nilfs2: fix race condition that causes file system corruption
autofs: don't fail mount for transient error
MIPS: BCM47XX: Fix LED inversion for WRT54GSv1
MIPS: Fix an n32 core file generation regset support regression
dm: fix race between dm_get_from_kobject() and __dm_destroy()
dm bufio: fix integer overflow when limiting maximum cache size
ALSA: hda: Add Raven PCI ID
MIPS: ralink: Fix typo in mt7628 pinmux function
MIPS: ralink: Fix MT7628 pinmux
ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
x86/decoder: Add new TEST instruction pattern
lib/mpi: call cond_resched() from mpi_powm() loop
sched: Make resched_cpu() unconditional
vsock: use new wait API for vsock_stream_sendmsg()
AF_VSOCK: Shrink the area influenced by prepare_to_wait
ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
s390/disassembler: increase show_code buffer size
s390/disassembler: add missing end marker for e7 table
s390/runtime instrumention: fix possible memory corruption
s390: fix transactional execution control register handling
BACKPORT: time: Clean up CLOCK_MONOTONIC_RAW time handling
BACKPORT: time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
UPSTREAM: arm64: vdso: fix clock_getres for 4GiB-aligned res
f2fs: updates on 4.15-rc1
UPSTREAM: android: binder: fix type mismatch warning
Linux 4.4.102
mm, hwpoison: fixup "mm: check the return value of lookup_page_ext for all call sites"
Conflicts:
fs/ext4/crypto_key.c
mm/debug-pagealloc.c
Change-Id: Ibe35d78bd0397f3ff2049e0a1dda20fcb06f2f75
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-f0b9d2d
Linux 4.4.101
mm/pagewalk.c: report holes in hugetlb ranges
mm/page_ext.c: check if page_ext is not prepared
mm: check the return value of lookup_page_ext for all call sites
coda: fix 'kernel memory exposure attempt' in fsync
mm/page_alloc.c: broken deferred calculation
ipmi: fix unsigned long underflow
ocfs2: should wait dio before inode lock in ocfs2_setattr()
nvme: Fix memory order on async queue deletion
arm64: fix dump_instr when PAN and UAO are in use
serial: omap: Fix EFR write on RTS deassertion
ima: do not update security.ima if appraisal status is not INTEGRITY_PASS
net/sctp: Always set scope_id in sctp_inet6_skb_msgname
fealnx: Fix building error on MIPS
sctp: do not peel off an assoc from one netns to another one
af_netlink: ensure that NLMSG_DONE never fails in dumps
vlan: fix a use-after-free in vlan_device_event()
bonding: discard lowest hash bit for 802.3ad layer3+4
netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed
tcp: do not mangle skb->cb[] in tcp_make_synack()
Conflicts:
mm/debug-pagealloc.c
mm/page_ext.c
mm/page_owner.c
Change-Id: I551aff1b4c8a0d72f64a234abb8ac88990fbc9e5
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-482cc74
Linux 4.4.100
USB: serial: garmin_gps: fix memory leak on probe errors
USB: serial: garmin_gps: fix I/O after failed probe and remove
USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw update
USB: Add delay-init quirk for Corsair K70 LUX keyboards
USB: usbfs: compute urb->actual_length for isochronous
uapi: fix linux/rds.h userspace compilation errors
uapi: fix linux/rds.h userspace compilation error
Revert "uapi: fix linux/rds.h userspace compilation errors"
Revert "crypto: xts - Add ECB dependency"
MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR builds
MIPS: init: Ensure reserved memory regions are not added to bootmem
MIPS: init: Ensure bootmem does not corrupt reserved memory
mm: add PHYS_PFN, use it in __phys_to_pfn()
MIPS: End asm function prologue macros with .insn
staging: rtl8712: fixed little endian problem
ixgbe: do not disable FEC from the driver
ixgbe: add mask for 64 RSS queues
ixgbe: Reduce I2C retry count on X550 devices
ixgbe: handle close/suspend race with netif_device_detach/present
ixgbe: fix AER error handling
arm64: dts: NS2: reserve memory for Nitro firmware
ALSA: hda/realtek - Add new codec ID ALC299
gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
backlight: adp5520: Fix error handling in adp5520_bl_probe()
backlight: lcd: Fix race condition during register
ALSA: vx: Fix possible transfer overflow
ALSA: vx: Don't try to update capture stream before running
scsi: lpfc: Clear the VendorVersion in the PLOGI/PLOGI ACC payload
scsi: lpfc: Correct issue leading to oops during link reset
scsi: lpfc: Correct host name in symbolic_name field
scsi: lpfc: FCoE VPort enable-disable does not bring up the VPort
scsi: lpfc: Add missing memory barrier
staging: rtl8188eu: fix incorrect ERROR tags from logs
scsi: ufs: add capability to keep auto bkops always enabled
scsi: ufs-qcom: Fix module autoload
igb: Fix hw_dbg logging in igb_update_flash_i210
igb: close/suspend race in netif_device_detach
igb: reset the PHY before reading the PHY ID
drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocache
ata: SATA_MV should depend on HAS_DMA
ata: SATA_HIGHBANK should depend on HAS_DMA
ata: ATA_BMDMA should depend on HAS_DMA
ARM: dts: Fix omap3 off mode pull defines
ARM: OMAP2+: Fix init for multiple quirks for the same SoC
ARM: dts: Fix am335x and dm814x scm syscon to probe children
ARM: dts: Fix compatible for ti81xx uarts for 8250
fm10k: request reset when mbx->state changes
extcon: palmas: Check the parent instance to prevent the NULL
dmaengine: dmatest: warn user when dma test times out
Bluetooth: btusb: fix QCA Rome suspend/resume
arm: crypto: reduce priority of bit-sliced AES cipher
net: qmi_wwan: fix divide by 0 on bad descriptors
net: cdc_ether: fix divide by 0 on bad descriptors
sctp: do not peel off an assoc from one netns to another one
xen-blkback: don't leak stack data via response ring
bpf: don't let ldimm64 leak map addresses on unprivileged
KVM: x86: fix singlestepping over syscall
ext4: fix data exposure after a crash
media: dib0700: fix invalid dvb_detach argument
media: imon: Fix null-ptr-deref in imon_probe
BACKPORT: arm64: Use __pa_symbol for empty_zero_page
BACKPORT: arm64: Use __pa_symbol for kernel symbols
UPSTREAM: mm: Introduce lm_alias
Conflicts:
arch/arm64/kernel/insn.c
arch/arm64/kernel/setup.c
arch/arm64/mm/mmu.c
drivers/scsi/ufs/ufshcd.h
Change-Id: I4ffc41779ec115eecab09d72dd8042151514be39
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-7eab308
Linux 4.4.99
misc: panel: properly restore atomic counter on error path
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
target/iscsi: Fix iSCSI task reassignment handling
brcmfmac: remove setting IBSS mode when stopping AP
tipc: fix link attribute propagation bug
security/keys: add CONFIG_KEYS_COMPAT to Kconfig
tcp/dccp: fix other lockdep splats accessing ireq_opt
tcp/dccp: fix lockdep splat in inet_csk_route_req()
tcp/dccp: fix ireq->opt races
ipip: only increase err_count for some certain type icmp in ipip_err
ppp: fix race in ppp device destruction
sctp: reset owner sk for data chunks on out queues when migrating a sock
tun: allow positive return values on dev_get_valid_name() call
ip6_gre: only increase err_count for some certain type icmpv6 in ip6gre_err
net/unix: don't show information about sockets from other namespaces
ipv6: flowlabel: do not leave opt->tot_len with garbage
packet: avoid panic in packet_getsockopt()
sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
tun: call dev_get_valid_name() before register_netdevice()
l2tp: check ps->sock before running pppol2tp_session_ioctl()
tcp: fix tcp_mtu_probe() vs highest_sack
tun/tap: sanitize TUNSETSNDBUF input
ALSA: seq: Cancel pending autoload work at unbinding device
Input: ims-psu - check if CDC union descriptor is sane
usb: usbtest: fix NULL pointer dereference
mac80211: don't compare TKIP TX MIC key in reinstall prevention
mac80211: use constant time comparison with keys
mac80211: accept key reinstall without changing anything
FROMLIST: binder: fix proc->files use-after-free
Change-Id: I9aaf4f803a5da1fc983879a214b2fddda7879f41
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-03d4af8
Linux 4.4.98
PKCS#7: fix unitialized boolean 'want'
x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context
can: c_can: don't indicate triple sampling support for D_CAN
can: sun4i: handle overrun in RX FIFO
rbd: use GFP_NOIO for parent stat and data requests
drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue
Input: elan_i2c - add ELAN060C to the ACPI table
MIPS: AR7: Ensure that serial ports are properly set up
MIPS: AR7: Defer registration of GPIO
tools: firmware: check for distro fallback udev cancel rule
selftests: firmware: send expected errors to /dev/null
selftests: firmware: add empty string and async tests
test: firmware_class: report errors properly on failure
MIPS: SMP: Fix deadlock & online race
MIPS: Fix race on setting and getting cpu_online_mask
MIPS: SMP: Use a completion event to signal CPU up
MIPS: Fix CM region target definitions
MIPS: microMIPS: Fix incorrect mask in insn_table_MM
ALSA: seq: Avoid invalid lockdep class warning
ALSA: seq: Fix OSS sysex delivery in OSS emulation
ARM: 8720/1: ensure dump_instr() checks addr_limit
KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
crypto: x86/sha1-mb - fix panic due to unaligned access
workqueue: Fix NULL pointer dereference
x86/uaccess, sched/preempt: Verify access_ok() context
platform/x86: hp-wmi: Do not shadow error values
platform/x86: hp-wmi: Fix error value for hp_wmi_tablet_state
KEYS: trusted: fix writing past end of buffer in trusted_read()
KEYS: trusted: sanitize all key material
cdc_ncm: Set NTB format again after altsetting switch for Huawei devices
platform/x86: hp-wmi: Fix detection for dock and tablet mode
net: dsa: select NET_SWITCHDEV
s390/qeth: issue STARTLAN as first IPA command
IB/ipoib: Change list_del to list_del_init in the tx object
Input: mpr121 - set missing event capability
Input: mpr121 - handle multiple bits change of status register
IPsec: do not ignore crypto err in ah4 input
netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family
usb: hcd: initialize hcd->flags to 0 when rm hcd
serial: sh-sci: Fix register offsets for the IRDA serial port
phy: increase size of MII_BUS_ID_SIZE and bus_id
iio: trigger: free trigger resource correctly
crypto: vmx - disable preemption to enable vsx in aes_ctr.c
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
powerpc/corenet: explicitly disable the SDHC controller on kmcoge4
iommu/arm-smmu-v3: Clear prior settings when updating STEs
KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter
drm: drm_minor_register(): Clean up debugfs on failure
xen/netback: set default upper limit of tx/rx queues to 8
PCI: mvebu: Handle changes to the bridge windows while enabled
video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
adv7604: Initialize drive strength to default when using DT
ANDROID: binder: clarify deferred thread work.
FROMLIST: arm64: Avoid aligning normal memory pointers in __memcpy_{to,from}io
Conflicts:
arch/arm64/kernel/io.c
Change-Id: I992fcf368dbc672ad7d6ae31e87f289f4d7df2bf
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=DNsf
-----END PGP SIGNATURE-----
Merge 4.4.107 into android-4.4
Changes in 4.4.107
crypto: hmac - require that the underlying hash algorithm is unkeyed
crypto: salsa20 - fix blkcipher_walk API usage
autofs: fix careless error in recent commit
tracing: Allocate mask_str buffer dynamically
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
USB: core: prevent malicious bNumInterfaces overflow
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
ceph: drop negative child dentries before try pruning inode's alias
Bluetooth: btusb: driver to enable the usb-wakeup feature
xhci: Don't add a virt_dev to the devs array before it's fully allocated
sched/rt: Do not pull from current CPU if only one CPU to pull
dmaengine: dmatest: move callback wait queue to thread context
ext4: fix fdatasync(2) after fallocate(2) operation
ext4: fix crash when a directory's i_size is too small
KEYS: add missing permission check for request_key() destination
mac80211: Fix addition of mesh configuration element
usb: phy: isp1301: Add OF device ID table
md-cluster: free md_cluster_info if node leave cluster
userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE
userfaultfd: selftest: vm: allow to build in vm/ directory
net: initialize msg.msg_flags in recvfrom
net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
net: bcmgenet: correct MIB access of UniMAC RUNT counters
net: bcmgenet: reserved phy revisions must be checked first
net: bcmgenet: power down internal phy if open or resume fails
net: bcmgenet: Power up the internal PHY before probing the MII
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: fix nfsd_reset_versions for NFSv4.
Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
netfilter: bridge: honor frag_max_size when refragmenting
writeback: fix memory leak in wb_queue_work()
net: wimax/i2400m: fix NULL-deref at probe
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
net: Resend IGMP memberships upon peer notification.
mlxsw: reg: Fix SPVM max record count
mlxsw: reg: Fix SPVMLR max record count
intel_th: pci: Add Gemini Lake support
openrisc: fix issue handling 8 byte get_user calls
scsi: hpsa: update check for logical volume status
scsi: hpsa: limit outstanding rescans
fjes: Fix wrong netdevice feature flags
drm/radeon/si: add dpm quirk for Oland
sched/deadline: Make sure the replenishment timer fires in the next period
sched/deadline: Throttle a constrained deadline task activated after the deadline
sched/deadline: Use deadline instead of period when calculating overflow
mmc: mediatek: Fixed bug where clock frequency could be set wrong
drm/radeon: reinstate oland workaround for sclk
afs: Fix missing put_page()
afs: Populate group ID from vnode status
afs: Adjust mode bits processing
afs: Flush outstanding writes when an fd is closed
afs: Migrate vlocation fields to 64-bit
afs: Prevent callback expiry timer overflow
afs: Fix the maths in afs_fs_store_data()
afs: Populate and use client modification time
afs: Fix page leak in afs_write_begin()
afs: Fix afs_kill_pages()
net/mlx4_core: Avoid delays during VF driver device shutdown
perf symbols: Fix symbols__fixup_end heuristic for corner cases
efi/esrt: Cleanup bad memory map log messages
NFSv4.1 respect server's max size in CREATE_SESSION
btrfs: add missing memset while reading compressed inline extents
target: Use system workqueue for ALUA transitions
target: fix ALUA transition timeout handling
target: fix race during implicit transition work flushes
sfc: don't warn on successful change of MAC
fbdev: controlfb: Add missing modes to fix out of bounds access
video: udlfb: Fix read EDID timeout
video: fbdev: au1200fb: Release some resources if a memory allocation fails
video: fbdev: au1200fb: Return an error code if a memory allocation fails
rtc: pcf8563: fix output clock rate
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
PCI/PME: Handle invalid data when reading Root Status
powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo
netfilter: ipvs: Fix inappropriate output of procfs
powerpc/opal: Fix EBUSY bug in acquiring tokens
powerpc/ipic: Fix status get and status clear
target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
iscsi-target: fix memory leak in lio_target_tiqn_addtpg()
target:fix condition return in core_pr_dump_initiator_port()
target/file: Do not return error for UNMAP if length is zero
arm-ccn: perf: Prevent module unload while PMU is in use
crypto: tcrypt - fix buffer lengths in test_aead_speed()
mm: Handle 0 flags in _calc_vm_trans() macro
clk: mediatek: add the option for determining PLL source clock
clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
clk: tegra: Fix cclk_lp divisor register
ppp: Destroy the mutex when cleanup
thermal/drivers/step_wise: Fix temperature regulation misbehavior
GFS2: Take inode off order_write list when setting jdata flag
bcache: explicitly destroy mutex while exiting
bcache: fix wrong cache_misses statistics
l2tp: cleanup l2tp_tunnel_delete calls
xfs: fix log block underflow during recovery cycle verification
xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real
PCI: Detach driver before procfs & sysfs teardown on device remove
scsi: hpsa: cleanup sas_phy structures in sysfs when unloading
scsi: hpsa: destroy sas transport properties before scsi_host
powerpc/perf/hv-24x7: Fix incorrect comparison in memord
tty fix oops when rmmod 8250
usb: musb: da8xx: fix babble condition handling
pinctrl: adi2: Fix Kconfig build problem
raid5: Set R5_Expanded on parity devices as well as data.
scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry
vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend
scsi: sd: change manage_start_stop to bool in sysfs interface
scsi: sd: change allow_restart to bool in sysfs interface
scsi: bfa: integer overflow in debugfs
udf: Avoid overflow when session starts at large offset
macvlan: Only deliver one copy of the frame to the macvlan interface
RDMA/cma: Avoid triggering undefined behavior
IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop
ath9k: fix tx99 potential info leak
Linux 4.4.107
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit ee0a47186e2fa9aa1c56cadcea470ca0ba8c8692 ]
When the user sets count to zero the string buffer would remain
completely uninitialized which causes the kernel to parse its
own stack data, potentially leading to an info leak. In addition
to that, the string might be not terminated properly when the
user data does not contain a 0-terminator.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4b678b06f6eef18bff44a338c01870234db0bc9 ]
When ndo_open and ndo_stop are called RTNL lock should be held.
In this specific case ipoib_ib_dev_open calls the offloaded ndo_open
which re-sets the number of TX queue assuming RTNL lock is held.
Since RTNL lock is not held, RTNL assert will fail.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c0b64f58e8d49570aa9ee55d880f92c20ff0166b ]
According to the C standard the behavior of computations with
integer operands is as follows:
* A computation involving unsigned operands can never overflow,
because a result that cannot be represented by the resulting
unsigned integer type is reduced modulo the number that is one
greater than the largest value that can be represented by the
resulting type.
* The behavior for signed integer underflow and overflow is
undefined.
Hence only use unsigned integers when checking for integer
overflow.
This patch is what I came up with after having analyzed the
following smatch warnings:
drivers/infiniband/core/cma.c:3448: cma_resolve_ib_udp() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'
drivers/infiniband/core/cma.c:3505: cma_connect_ib() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ]
This patch intoduces a slight adjustment for macvlan to address the fact
that in source mode I was seeing two copies of any packet addressed to the
macvlan interface being delivered where there should have been only one.
The issue appears to be that one copy was delivered based on the source MAC
address and then the second copy was being delivered based on the
destination MAC address. To fix it I am just treating a unicast address
match as though it is not a match since source based macvlan isn't supposed
to be matching based on the destination MAC anyway.
Fixes: 79cf79abce ("macvlan: add source mode")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit abdc0eb06964fe1d2fea6dd1391b734d0590365d ]
When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.
Reported-by: Cezary Sliwa <sliwa@ifpan.edu.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ]
We could allocate less memory than intended because we do:
bfad->regdata = kzalloc(len << 2, GFP_KERNEL);
The shift can overflow leading to a crash. This is debugfs code so the
impact is very small. I fixed the network version of this in March with
commit 13e2d5187f6b ("bna: integer overflow bug in debugfs").
Fixes: ab2a9ba189 ("[SCSI] bfa: add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 658e9a6dc1126f21fa417cd213e1cdbff8be0ba2 ]
/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0
unexpectedly by writing an invalid string such as the following:
echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 623401ee33e42cee64d333877892be8db02951eb ]
/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0
unexpectly by writing an invalid string.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42c8eb3f6e15367981b274cb79ee4657e2c6949d ]
The driver may sleep under a spinlock, and the function call path is:
vt6655_suspend (acquire the spinlock)
pci_set_power_state
__pci_start_power_transition (drivers/pci/pci.c)
msleep --> may sleep
To fix it, pci_set_power_state is called without having a spinlock.
This bug is found by my static analysis tool and my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ]
All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.
Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ]
When reshaping a fully degraded raid5/raid6 to a larger
nubmer of devices, the new device(s) are not in-sync
and so that can make the newly grown stripe appear to be
"failed".
To avoid this, we set the R5_Expanded flag to say "Even though
this device is not fully in-sync, this block is safe so
don't treat the device as failed for this stripe".
This flag is set for data devices, not not for parity devices.
Consequently, if you have a RAID6 with two devices that are partly
recovered and a spare, and start a reshape to include the spare,
then when the reshape gets past the point where the recovery was
up to, it will think the stripes are failed and will get into
an infinite loop, failing to make progress.
So when contructing parity on an EXPAND_READY stripe,
set R5_Expanded.
Reported-by: Curt <lightspd@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ]
The build robot is complaining on Blackfin:
drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
pointer to incomplete type 'struct gpio_port_t'
writew(readw(®s->port_fer) & ~BIT(offset),
^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
if (readl(®s->invert_set) & pintbit)
^~
It seems the driver need to include <asm/gpio.h> and <asm/irq.h>
to compile.
The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.
Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local <asm/gpio.h> header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.
Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.
This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.
Cc: Steven Miao <realmz6@gmail.com>
Cc: Huanhuan Feng <huanhuan.feng@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd3486ded7a0c313a6575343e6c2b21d14476645 upstream.
When babble condition happens, the musb controller might automatically
turns off VBUS. On DA8xx platform, the controller generates drvvbus
interrupt for turning off VBUS along with the babble interrupt.
In this case, we should handle the babble interrupt first and recover
from the babble condition.
This change ignores the drvvbus interrupt if babble interrupt is also
generated at the same time, so the babble recovery routine works
properly.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 05c14c03138532a3cb2aa29c2960445c8753343b ]
In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.
I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().
Fix it by swapping the second comparision, so it can be true.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dfb2e6f46b3074eb85203d8f0888b71ec1c2e37a ]
This patch cleans up a lot of warnings when unloading the driver.
A current example of the stack trace starts with:
[ 142.570715] sysfs group 'power' not found for kobject 'port-5:0'
There can be hundreds of these messages during a driver unload.
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
His original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102085.html
This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
---------------------------
Original patch description:
---------------------------
Unloading the hpsa driver causes warnings
[ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240()
[ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0'
with two different stacks:
1)
[ 1063.793774] [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.793780] [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60
[ 1063.793784] [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0
[ 1063.793802] [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas]
[ 1063.793819] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
2)
[ 1063.797103] [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.797118] [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas]
[ 1063.797134] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
This is caused by the fact that host device hostX is deleted before the
SAS transport devices hostX/port-a:b.
This patch fixes this by reverting the order of device deletions.
Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55ca38b4255bb336c2d35990bdb2b368e19b435a ]
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
The original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102083.html
This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
--------------------------------------
Original patch description from Martin:
--------------------------------------
When the hpsa module is unloaded using rmmod, dangling
symlinks remain under /sys/class/sas_phy. Fix this by
calling sas_phy_delete() rather than sas_phy_free (which,
according to comments, should not be called for PHYs that
have been set up successfully, anyway).
Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ]
When removing a device, for example a VF being removed due to SR-IOV
teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual
hot-unplug, we first remove the procfs and sysfs attributes for the device
before attempting to release the device from any driver bound to it.
Unbinding the driver from the device can take time. The device might need
to write out data or it might be actively in use. If it's in use by
userspace through a vfio driver, the unbind might block until the user
releases the device. This leads to a potentially non-trivial amount of
time where the device exists, but we've torn down the interfaces that
userspace uses to examine devices, for instance lspci might generate this
sort of error:
pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config
lspci: Unable to read the standard configuration space header of device 0000:01:0a.3
We don't seem to have any dependence on this teardown ordering in the
kernel, so let's unbind the driver first, which is also more symmetric with
the instantiation of the device in pci_bus_add_device().
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5e422f5e4fd71d18bc6b851eeb3864477b3d842e ]
There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the
passed in new extent state but always converted to normal, leading to wrong
behavior when converting from normal to unwritten.
Only found by code inspection, it seems like this code path to move partial
extent from written to unwritten while merging it with the next extent is
rarely exercised.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9f2a4505800607e537e9dd9dea4f55c4b0c30c7a ]
It is possible for mkfs to format very small filesystems with too
small of an internal log with respect to the various minimum size
and block count requirements. If this occurs when the log happens to
be smaller than the scan window used for cycle verification and the
scan wraps the end of the log, the start_blk calculation in
xlog_find_head() underflows and leads to an attempt to scan an
invalid range of log blocks. This results in log recovery failure
and a failed mount.
Since there may be filesystems out in the wild with this kind of
geometry, we cannot simply refuse to mount. Instead, cap the scan
window for cycle verification to the size of the physical log. This
ensures that the cycle verification proceeds as expected when the
scan wraps the end of the log.
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4dc12ffeaeac939097a3f55c881d3dc3523dff0c ]
l2tp_tunnel_delete does not return anything since commit 62b982eeb458
("l2tp: fix race condition in l2tp_tunnel_delete"). But call sites of
l2tp_tunnel_delete still do casts to void to avoid unused return value
warnings.
Kill these now useless casts.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c157313791a999646901b3e3c6888514ebc36d62 ]
Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.
[ML: applied by 3-way merge]
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ]
mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.
As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ]
This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.
The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.
Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:
filemap_fdatawrite() -> __filemap_fdatawrite_range()
__filemap_fdatawrite_range() -> do_writepages()
do_writepages() -> gfs2_jdata_writepages()
gfs2_jdata_writepages() -> gfs2_log_flush()
This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 07209fcf33542c1ff1e29df2dbdf8f29cdaacb10 ]
There is a particular situation when the cooling device is cpufreq and the heat
dissipation is not efficient enough where the temperature increases little by
little until reaching the critical threshold and leading to a SoC reset.
The behavior is reproducible on a hikey6220 with bad heat dissipation (eg.
stacked with other boards).
Running a simple C program doing while(1); for each CPU of the SoC makes the
temperature to reach the passive regulation trip point and ends up to the
maximum allowed temperature followed by a reset.
This issue has been also reported by running the libhugetlbfs test suite.
What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz
while the temperature continues to grow.
It appears the step wise governor calls get_target_state() the first time with
the throttle set to true and the trend to 'raising'. The code selects logically
the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so
good. The temperature decreases immediately but still stays greater than the
trip point, then get_target_state() is called again, this time with the
throttle set to true *and* the trend to 'dropping'. From there the algorithm
assumes we have to step down the state and the cpu frequency jumps back to
1.2GHz. But the temperature is still higher than the trip point, so
get_target_state() is called with throttle=1 and trend='raising' again, we jump
to 900MHz, then get_target_state() is called with throttle=1 and
trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not
stabilizes and continues to increase.
[ 237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 237.922690] thermal cooling_device0: cur_state=0
[ 237.922701] thermal cooling_device0: old_target=0, target=1
[ 238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[ 238.026694] thermal cooling_device0: cur_state=1
[ 238.026707] thermal cooling_device0: old_target=1, target=0
[ 238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 238.134679] thermal cooling_device0: cur_state=0
[ 238.134690] thermal cooling_device0: old_target=0, target=1
In this situation the temperature continues to increase while the trend is
oscillating between 'dropping' and 'raising'. We need to keep the current state
untouched if the throttle is set, so the temperature can decrease or a higher
state could be selected, thus preventing this oscillation.
Keeping the next_target untouched when 'throttle' is true at 'dropping' time
fixes the issue.
The following traces show the governor does not change the next state if
trend==2 (dropping) and throttle==1.
[ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2306.128021] thermal cooling_device0: cur_state=0
[ 2306.128031] thermal cooling_device0: old_target=0, target=1
[ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[ 2306.232030] thermal cooling_device0: cur_state=1
[ 2306.232042] thermal cooling_device0: old_target=1, target=1
[ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1
[ 2306.336021] thermal cooling_device0: cur_state=1
[ 2306.336034] thermal cooling_device0: old_target=1, target=1
[ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2306.440022] thermal cooling_device0: cur_state=1
[ 2306.440034] thermal cooling_device0: old_target=1, target=0
[ ... ]
After a while, if the temperature continues to increase, the next state becomes
2 which is 720MHz on the hikey. That results in the temperature stabilizing
around the trip point.
[ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0
[ 2455.832019] thermal cooling_device0: cur_state=1
[ 2455.832032] thermal cooling_device0: old_target=1, target=1
[ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2455.936027] thermal cooling_device0: cur_state=1
[ 2455.936040] thermal cooling_device0: old_target=1, target=1
[ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2456.044023] thermal cooling_device0: cur_state=1
[ 2456.044036] thermal cooling_device0: old_target=1, target=1
[ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2456.148042] thermal cooling_device0: cur_state=1
[ 2456.148055] thermal cooling_device0: old_target=1, target=2
[ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2456.252058] thermal cooling_device0: cur_state=2
[ 2456.252075] thermal cooling_device0: old_target=2, target=1
IOW, this change is needed to keep the state for a cooling device if the
temperature trend is oscillating while the temperature increases slightly.
Without this change, the situation above leads to a catastrophic crash by a
hardware reset on hikey. This issue has been reported to happen on an OMAP
dra7xx also.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ]
The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the
good readbility, it's better to invoke it in exit func when the init
func invokes mutex_init.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 54eff2264d3e9fd7e3987de1d7eba1d3581c631e ]
According to comments in code and common sense, cclk_lp uses its
own divisor, not cclk_g's.
Fixes: b08e8c0ecc ("clk: tegra: add clock support for Tegra30")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c68ee58d9ee7b856ac722f18f4f26579c8fbd2b4 ]
On i.MX6 SoCs without VPU (in my case MCIMX6D4AVT10AC), the hdmi driver
fails to probe:
[ 2.540030] dwhdmi-imx 120000.hdmi: Unsupported HDMI controller
(0000:00:00)
[ 2.548199] imx-drm display-subsystem: failed to bind 120000.hdmi
(ops dw_hdmi_imx_ops): -19
[ 2.557403] imx-drm display-subsystem: master bind failed: -19
That's because hdmi_isfr's parent, video_27m, is not correctly ungated.
As explained in commit 5ccc248cc5 ("ARM: imx6q: clk: Add support for
mipi_core_cfg clock as a shared clock gate"), video_27m is gated by
CCM_CCGR3[CG8].
On i.MX6 SoCs with VPU, the hdmi is working thanks to the
CCM_CMEOR[mod_en_ov_vpu] bit which makes the video_27m ungated whatever
is in CCM_CCGR3[CG8]. The issue can be reproduced by setting
CCMEOR[mod_en_ov_vpu] to 0.
Make the HDMI work in every case by setting hdmi_isfr's parent to
mipi_core_cfg.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c955bf3998efa3355790a4d8c82874582f1bc727 ]
Since the previous setup always sets the PLL using crystal 26MHz, this
doesn't always happen in every MediaTek platform. So the patch added
flexibility for assigning extra member for determining the PLL source
clock.
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ]
_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7aacbfcb331ceff3ac43096d563a1f93ed46e35e ]
Fix the way the length of the buffers used for
encryption / decryption are computed.
For e.g. in case of encryption, input buffer does not contain
an authentication tag.
Signed-off-by: Robert Baronescu <robert.baronescu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7f5828bf77dcbd61d51f4736c1d5aa35663fbb4 ]
When the PMU driver is built as a module, the perf expects the
pmu->module to be valid, so that the driver is prevented from
being unloaded while it is in use. Fix the CCN pmu driver to
fill in this field.
Fixes: a33b0daab7 ("bus: ARM CCN PMU driver")
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 594e25e73440863981032d76c9b1e33409ceff6e ]
The function fd_execute_unmap() in target_core_file.c calles
ret = file->f_op->fallocate(file, mode, pos, len);
Some filesystems implement fallocate() to return error if
length is zero (e.g. btrfs) but according to SCSI Block
Commands spec UNMAP should return success for zero length.
Signed-off-by: Jiang Yi <jiangyilism@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 24528f089d0a444070aa4f715ace537e8d6bf168 ]
When is pr_reg->isid_present_at_reg is false,this function should return.
This fixes a regression originally introduced by:
commit d2843c173e
Author: Andy Grover <agrover@redhat.com>
Date: Thu May 16 10:40:55 2013 -0700
target: Alter core_pr_dump_initiator_port for ease of use
Signed-off-by: tangwenji <tang.wenji@zte.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cfe2b621bb18d86e93271febf8c6e37622da2d14 ]
Avoid that cmd->se_cmd.se_tfo is read after a command has already been
freed.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6b148a7ce72a7f87c81cbcde48af014abc0516a9 ]
IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ]
The current code checks the completion map to look for the first token
that is complete. In some cases, a completion can come in but the
token can still be on lease to the caller processing the completion.
If this completed but unreleased token is the first token found in the
bitmap by another tasks trying to acquire a token, then the
__test_and_set_bit call will fail since the token will still be on
lease. The acquisition will then fail with an EBUSY.
This patch reorganizes the acquisition code to look at the
opal_async_token_map for an unleased token. If the token has no lease
it must have no outstanding completions so we should never see an
EBUSY, unless we have leased out too many tokens. Since
opal_async_get_token_inrerruptible is protected by a semaphore, we
will practically never see EBUSY anymore.
Fixes: 8d72482322 ("powerpc/powernv: Infrastructure to support OPAL async completion")
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c5504f724c86ee925e7ffb80aa342cfd57959b13 ]
Information about ipvs in different network namespace can be seen via procfs.
How to reproduce:
# ip netns add ns01
# ip netns add ns02
# ip netns exec ns01 ip a add dev lo 127.0.0.1/8
# ip netns exec ns02 ip a add dev lo 127.0.0.1/8
# ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80
# ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80
The ipvsadm displays information about its own network namespace only.
# ip netns exec ns01 ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.1.1.1:80 wlc
# ip netns exec ns02 ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.1.1.2:80 wlc
But I can see information about other network namespace via procfs.
# ip netns exec ns01 cat /proc/net/ip_vs
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 0A010101:0050 wlc
TCP 0A010102:0050 wlc
# ip netns exec ns02 cat /proc/net/ip_vs
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 0A010102:0050 wlc
Signed-off-by: KUWAZAWA Takuya <albatross0@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
