Debug policy of secure devices take care of nullifying
the ram dumps in secure boot mode. So no need to check
about secure boot mode in reboot driver to enable
download feature.
Change-Id: Idb5c93aca630f0093fccc2997bf50e7958dfbf54
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
firmware-5.bin file for WCN3990 contains just WMI and HTT versions and
firmware is loaded by PIL.
This change, populate the hw params for WCN3990 and parse
firmware-5.bin file for WMI and HTT versions.
CRs-Fixed: 2002151
Change-Id: Ic65d3696e9546fd428e608f4738e9fe53d61338f
Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
Values stored in etm are lost across power collapse.
Add etm save retore nodes which saves etm
values across power collapse.
Change-Id: I9ceb89a255847ca1d9dc01f223283f5664cb8feb
CRs-fixed: 1112224
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
IPA and GSI firmwares are saved on the file-system as an
ELF file. IPA driver extracts the firmwares and load
them during driver initialization.
This change adds validation steps to each firmware before
loading: load addresses, memory sizes, firmware sizes and
more...
Change-Id: I7d7f66e8e8a9ca0efae08b1e57b25ae4e44cc5bb
CRs-fixed: 1110522
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
BLSP2 UART1 is used as transport for Bluetooth between sdm630 & wcn3990.
Enable it so that Bluetooth can be enabled on sdm630 CDP/MTP/QRD.
Change-Id: I61f300d5a8fa54172acce429ee961f7caef7d404
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
Add sdhc ice device tree data to dts files with all
the necessary parameters, to enable the ICE driver
for crypto operations related to disk encryption.
Change-Id: I5bfcf35f4a93ef9ef21508d3c4b3309bb0086511
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
Add ufs ice device tree data to dts files with all
the necessary parameters, to enable the ICE driver
for crypto operations related to disk encryption.
Change-Id: I87463a1c1a064ba2a0597d095e6807931e7b5666
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
Modify DCC RAM size for sdm660. DCC RAM is used to
store captured information locally in DCC.
Change-Id: Ib9d4ae640e8162d5a3f44739b9289457ee4ae43c
CRs-fixed: 2002031
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
Temperature compensation is needed for charger die
temperature. Offset and slope coefficients are applied
based on the FAB ID read from the REVID peripheral.
Change-Id: I0bd5712b17b11c245da6d737ea0994e7f17d9837
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Add ufs and ufs-phy device nodes to support
ufs as storage device for SDM630 platform.
Change-Id: Ia4059d1663dc7886ac3873bbdcca6023c6ff5643
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Move all "find_votable" requests before any voter creation
in smb library to prevent multiple creation/destruction of
votables due to probe-deferrals.
CRs-Fixed: 2001651
Change-Id: I03cb30775720a53ad24e1c5d5e075d7442b2729c
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Add a new votable in parallel driver to support wakeup source
handling via pmic-voter framework.
CRs-Fixed: 2001651
Change-Id: Ia2c67d76081c36508d1ad3c3cb3a0be4c1a55814
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Parallel charger registers to power supply framework with name
"parallel" instead of "usb-parallel" thus update all references
of "usb-parallel" with "parallel".
While at it, remove extra NULL pointer check of pl_psy in
parallel enable path.
CRs-Fixed: 2001651
Change-Id: I4150808f7122cef970296553fb70671df12aced9
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
During SOC masking, SOC 100 will be shown to the user after the
charge termination and as long as the charger is inserted. After
the charger is removed or device is discharging when the charger
was inserted, showing the real monotonic SOC instantly reduces
the user experience. Linearize the drop in SOC so that it can be
spread to a wider range.
Change-Id: I509e59f8e5d9e9addd8c5721369fbcf664158338
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
When SOC masking algorithm is enabled, a SOC of 100 will be shown
to the user when certain conditions are met. When the device
starts discharging after charge termination, auto recharge will
be triggered once the SOC or Vbatt goes below the threshold. When
the recharge is based on Vbatt, a fluctutation in Vbatt can cause
issues in SOC masking algorithm. To make it robust, adjust the
recharge voltage dynamically based on charging status and battery
SOC.
Add a device tree property to allow configuring auto recharge to
be based off SOC or battery voltage. This will help the user to
select auto recharge configuration easily.
Change-Id: I2d749806aa51b9fa747967b592b6622cc12bee65
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
