Tx vring needs to be enlarged to get better
performance for traffic over 2Gbps.
Change-Id: Ia78ddf6f5243a8d28c3bfdfc29e0eb512658d0a7
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: ee5dfe0d240e21afe63bdd77bf1d4a386203aa6e
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
In case there are multiple WMI commands with the same reply_id,
the following scenario can occur:
- Driver sends the first command to the device
- The reply didn’t get on time and there is timeout
- Reply_id, reply_buf and reply_size are set to 0
- Driver sends second wmi command with the same reply_id as the first
- Driver sets wil->reply_id
- Reply for the first wmi command arrives and handled by wmi_recv_cmd
- As its ID fits the reply_id but the reply_buf is not set yet it is
handled as a reply with event handler, and WARN_ON is printed
This patch guarantee atomic setting of all the reply variables and
prevents the above scenario.
Change-Id: I7eac78d7beb90436d24468547aeb789f7c8ec878
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: fe5c271e2878fb080f1b32fec5b4e3f7a6070152
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
cfg80211_ops.disconnect() should wait for disconnect flow to
complete. If it does not, internal state becomes out of sync with
one in cfg80211. If one does stress test connect/disconnect
sequence, cfg80211 will issue next connect before disconnect
completed internally.
Change-Id: I66a6a23239710c85b9cdb5824c205692c4b53866
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 78771d76f826202012201d700028a2d866d03fb3
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
wil_tx_vring locks the vring_tx_data lock before accessing the TX
vring to check if it is enabled and valid for use.
In case of quick disconnect / connect events for the same station,
spin_lock(&txdata->lock) can be called during the lock initialization
in the vring init function.
To prevent such a race, the TX vrings spin lock should be initialized
once during wil6210 driver initialization.
Change-Id: I11fa67f7040c4a728f0cd7633f4fbb829ac165d0
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
git-commit: 875e94392ad2be9776c8325d3573160eb1455a2b
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 982882
Signed-off-by: Maya Erez <merez@codeaurora.org>
Thermal trips has to be configurable for userspace
thermal-engine to set thermal thresholds and get
thermal trip notifications. Enable this by default
for all ARCH_QCOM based targets.
Change-Id: I22b8c5834a278d6ebb943e73c70966f37a7b3dcd
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
TSENS (Temperature sensor) driver provides an interface
to read on die temperature sensors and set temperature
thresholds for notifications.
Change-Id: I806ed575427b90ee82c08ac1a7f8c8692c03b6d1
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
During boot there is a possibility for two execution context to create
stats percpu variable concurrently. One called from cpufreq_stats_init
context and other as a part of policy notifier call back. This will
result in corrupted stats variable.
Disable cpu hotplug to avoid corruption.
Change-Id: Iefe2d6b370f6ec303286afc139fa9913fa9a4099
Suggested-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Arun KS <arunks@codeaurora.org>
This change adds the config variable to enable
compilation of the IPC Router MHI Transport.
CRs-Fixed: 994871
Change-Id: I23d391546a191eb104fb4c50e19aef8a8b566adb
Signed-off-by: Chris Lew <clew@codeaurora.org>
Adds new configuration in device tree for external
modems.
CRs-Fixed: 994871
Change-Id: I798d27248acaf7aa2ab15e8739c638a96a49b2b7
Signed-off-by: Chris Lew <clew@codeaurora.org>
MHI supports virtual memory to dma mapping implicitly. Update IPC Router
to pass virtual address directly to MHI. MHI driver also returns
standard Linux error codes in case of failure. Update IPC Router to
handle this change.
CRs-Fixed: 994871
Change-Id: I907adfb5f5d24c06dd038b07a17b31d42b91dfad
Signed-off-by: Chris Lew <clew@codeaurora.org>
Add changes to enable different output formats on supported
target. This change enables camif raw path to output
data in multiple other formats along with legacy packed.
Change-Id: Ie763455df2cffcb4fc9447a1bbcc8d9c7d577c6c
Signed-off-by: Sagar Gore <sgore@codeaurora.org>
Decode and print the L2 error state registers on Kryo2xx
Gold CPUs.
CRs-Fixed: 969563
Change-Id: If9ec89ab2f2ea341f38d8952c1688d277a5082ed
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Add debugfs node based infrastructure to test service locator
Change-Id: I37cb319638ce5b6285b2f2ff4386fd92cbda83fd
Signed-off-by: Pushkar Joshi <pushkarj@codeaurora.org>
Add a library that retrieves location information given a service
identifier. Location here translates to what process domain
exports the service, and which subsystem that process executes on.
Change-Id: Ia5d76ea4de29dbafe309a831f8a2418c058cba94
Signed-off-by: Pushkar Joshi <pushkarj@codeaurora.org>
[dkeitel@codeaurora.org: fixed minor conflicts in Kconfig and Makefile.]
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Add code to support subsytem restart(SSR) for subsystems using generic
interrupt handler.
CRs-Fixed: 979349
Change-Id: I5633baa3d687972a2038336c78555747fc489c84
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
Add camera isp and ispif dtsi entries. This is needed to enable
isp hardware.
CRs-Fixed: 987962
Change-Id: Ib64384d4cc18577c4f33f140ed35311b998f4dda
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
Correct the function pointer used to unmap.
This is not expected to have any functional impact, as both the new and
old function pointers were nops.
Change-Id: I2f78d5c798d0d2575d52b341aaf29b35294c93f1
Reported-by: Rohit Kulkarni <rkulkarn@codeaurora.org>
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
For iommus which do not use stage1 translation, stage2 may not be aware
of the device's dma_mask requirements. Choose the dma_ops such that
allocations are made within the dma_mask region and bounce buffers are
used as necessary.
Change-Id: If2ae2021ae9ce10bd22f424967cfcd9c3f94534e
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
change "iommu/arm-smmu: Support DOMAIN_ATTR_S1_BYPASS"
checks the wrong bit when determine whether to bypass or not
to bypass stage1 translation. Fix it.
CRs-Fixed: 995213
Change-Id: Id347f540f866be6b8442d5f166c6cf7b0ae4c000
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Certain configurations may require nested translation, but may
want to avoid software performance limitation on map/unmap
operations.
Change-Id: I6653b3b6ceb071283fb5a8e07257c496e99dd1f3
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Add support to enable audio functionality on msmcobalt
platform.
Change-Id: Ia06b7877b35c599fdb7a38c09e1cc003d88ec46b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add device tree entries of codec and sound node to
have sound card enumeration done on msmcobalt platform.
Change-Id: Icc1ddddfdce35ab1ca70dc68fb4878f7c0c36dc7
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
avtimer is used for synchronization of audio and video
during the playback/capture usecase. Add device tree
documentation for avtimer to explain the device tree
node information.
Change-Id: I625a8970e800487746d458c8f51f63c1b371f08c
Signed-off-by: Kuirong Wang <kuirongw@codeaurora.org>
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
CPRh controllers communicate voltages to the PMIC via the SAW
AVS interface similar to other controllers supporting hardware
closed-loop operation. Ensure the SPM driver has probed and
enabled the SAW AVS system.
Change-Id: Ide2c4500cfdd0a9c684329ab5f7ac0603e4fc199
CRs-Fixed: 995686
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
CPRh communicates voltages to the PMIC via L2 SAW4.
APCLUS{0,1}_L2_SAW4_AVS_CTL/LIMIT registers need to be programmed for
CPRh operation.
CRs-fixed: 987593
Change-Id: I635d710759a94e2bb29fd3c7811816d09243de50
Signed-off-by: Archana Sathyakumar <asathyak@codeaurora.org>
Add new SAW version v4.1 to support AVS and SPM.
Change-Id: I2187343430efea1dc20523d6e8a5965f360864e6
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Archana Sathyakumar <asathyak@codeaurora.org>
The hmss clocks in the GCC domain should be left enabled
as they are required to be on as long as the CPUs are
active.
Change-Id: If3cc9573debc65018b896f64b1fc85d6a8682168
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Increase the log buf shift in msmcortex and msmcortex-perf to 17.
Change-Id: I920c73ddd2f30c7ab5dd29d3641888fb0f6be61b
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Incorporate the new phy calibration sequence that adds additional
registers and modifies certain calibration data for ufs-qmp-v3 phy.
Change-Id: Id0ac493420a4d076f99b9f0d31b479a50f6eafd2
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
In some cases it is useful to manually force the controller
into peripheral, host or disconnect mode. Add a device
attribute to sysfs to do this. Reading it back will indicate
the current mode.
Change-Id: I77d9d2a127a2a763b93b968f1d8ccf68a649493e
Signed-off-by: Jack Pham <jackp@codeaurora.org>
There is no ref_clk selection and switching required on msmcobalt with
USB QUSB PHY. Hence remove usage of phy_clk_scheme.
Change-Id: I755eb9d30f50e30e55382c52aa3471f272fdb4e7
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Currently phy_clk_scheme related information (i.e. cml or cmos) is
used to make decision about how to use ref_clk. On newer platform
this functionality is not required. Hence tie phy_clk_scheme with
availabiliity of ref_clk_base_addr and perform required ref_clk
operation using phy_clk_scheme.
Change-Id: If1f264e155a4411df5e037f9f28bc590e9465ac9
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Fix used register offset and its value with USB QMP PHY.
Otherwise QMP PHY may not initialized as expected.
Change-Id: Ifc23fee9ccecaee738998b957ad5d3fc85094bf6
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
QUSB PHY driver expects to have valid number of bits and bit position
to use efuse based address otherwise it fails QUSB PHY driver probe.
Fix this issue by removing efuse base address with QUSB PHY device
node until valid information is available.
Change-Id: I958e8a2e61c5b4f906d6896ac9696cbb88cd5a69
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
This change enables u1u2 related low power mode functionality with
super-speed link on msmcobalt.
Change-Id: I5bc5976ec2c0bfb33358614f834db8a7dc7b9e55
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Add QMI message to send MSA0 physical memory start address
and size to wlan FW.
Add QMI message indication to get the HAL-PYH Pin connect test
result from wlan FW.
Add a new qmi message for sending fw debug configuration.
Update cap_resp message.
CRs-Fixed: 978217
Change-Id: Ie0fa374b720ebbffd1d1fd5b9289b2aa816a822a
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Allow child devices to be defined and populated once the OSM
clock device probes. This enables parent and child relationships
across the OSM clock device and any dependent devices.
Change-Id: I0193663d72e05d8227f9814268ec293cfb94bbe3
CRs-Fixed: 994175
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Use secure IO write calls to program the APM crossover corner
and registers 47 and 48 of OSM sequencer architectural space.
Values for these registers reside in the HLOS, but must be
programmed from a secure domain.
Change-Id: I961bde48822adcbfbbb28130f2872104de5c11ce
CRs-Fixed: 992982
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Add a debugfs interface to enable and configure OSM debug trace
packet generation. There are four different supported OSM packet
IDs and two tracing modes. The supported sysfs files and their
corresponding values are:
trace_enable [0, 1]
trace_method [xor, periodic]
trace_packet_id [0, 1, 2, 3]
trace_periodic_timer [1 - 20000000] (us)
Unless otherwised modified through trace_periodic_timer, the
default periodic timer is set to 1 millisecond.
Change-Id: I82b7f78bac7379e9a647b5c8e68c356cd1d5c863
CRs-Fixed: 987787
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Remove the qcom,osm-no-tz flag from the OSM clock device
to prevent the clock-osm driver from initializing registers
which are normally programmed by the secure world.
Change-Id: Iadcbba42eeae1f4e8b4a43e0bf833eaa7e96afd5
CRs-Fixed: 992982
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Enable the pulse swallower, droop, WFx, and power-collapse
FSMs to enable all features of the OSM hardware.
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
CRs-Fixed: 992982
Change-Id: I69fa6fd84c1e89bb6b698b865dcb9ce1bfc35e98
Refactor the enablement and parameter initialization of the
supported OSM FSMs. This initialization can be performed
by the clock-osm driver in absence of secure-world
initialization.
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
CRs-Fixed: 992982
Change-Id: Ie2a78394b388b0357459f1778bb7b2d821abde1c
Support an additional column in the OSM look up hardware table
which establishes a mapping between frequency and mem-acc level.
The OSM uses this mapping to program ACC settings which vary
depending upon the performance level. In addition, update the
OSM sequencer and branch instructions to support ACC programming
as part of the clock scaling scheme and define the mem-acc level
associated with each row of the OSM look up tables.
Change-Id: I03e6f189ab0ab6af406a338bd667fb40240d89b3
CRs-Fixed: 981231
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Move the property overrides defined for the OSM clock CPU device
on the RUMI platform to msmcobalt-rumi.dtsi.
Change-Id: I2f37dc87b3380a1d84b3f2aa1763a47c4ec9b034
CRs-Fixed: 981231
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
The vdd and vdd io for SDHC can be turned off when not in use,
hence remove the always on setting and update the supported
voltage levels as per power grid.
Change-Id: I64059e1c440736884c7fea1a0096351b8b49f976
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
