This fixes the smatch warning below:
drivers/soc/qcom/memshare/msm_memshare.c:570 handle_alloc_generic_req()
warn: inconsistent returns 'mutex:&memsh_drv->mem_share'.
Bug: 35898203
Change-Id: I86f3d77c9bb471b1bc26360e11e378fa3d1a3f66
Signed-off-by: David Lin <dtwlin@google.com>
This fixes the smath warning below:
drivers/thermal/qpnp-adc-tm.c:2943 qpnp_adc_tm_disable_chan_meas() warn:
inconsistent returns 'mutex:&chip->adc->adc_lock'.
Bug: 35898203
Change-Id: I149ed4868cd4754246b3b8845a0af7f1f08c0931
Signed-off-by: David Lin <dtwlin@google.com>
This fixes the following smatch warning:
drivers/soc/qcom/qmi_interface.c:2019 qmi_svc_event_notifier_register()
warn: inconsistent returns 'mutex:&temp->svc_addr_list_lock'.
Change-Id: I2ada7d79a0ac6b6a14abad0cb463af491dd1c319
Signed-off-by: David Lin <dtwlin@google.com>
In case of error on lost arbitration, the host should at least attempt
to retry in case if the bus error is transient (i.e., from signal
interference or misbehaved devices). Use the default 2s timeout setting.
Bug: 35439882
Change-Id: Id9bd5a5ea764405401588220a2d2bf0fd85111f7
Signed-off-by: David Lin <dtwlin@google.com>
This patch fixes the following coccicheck errors:
msm_rng.c:335:2-8: ERROR: missing clk_put;
clk_get on line 282 and execution via conditional on line 333
msm_rng.c:335:2-8: ERROR: missing clk_put;
clk_get on line 285 and execution via conditional on line 333
Bug: 35898203
Change-Id: Id6e0854ec11f95fe2bf7f887876535e2d8e74d22
Signed-off-by: David Lin <dtwlin@google.com>
bfq-iosched was missing from the Makefile.
Test: Check /sys/block/sda/queue/scheduler. bfq now available.
Change-Id: I57407ef65aad9ef319d56b9338a3180fadc9053b
In certain 802.11 wireless deployments, there will be ARP proxies
that use knowledge of the network to correctly answer requests.
To prevent gratuitous ARP frames on the shared medium from being
a problem, on such deployments wireless needs to drop them.
Enable this by providing an option called "drop_gratuitous_arp".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 4078228159c9f54cca7347a8bdace29f2abdef65)
Change-Id: I8772dbd7471085878f8b4161eb2a056d79b8b232
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
In certain 802.11 wireless deployments, there will be NA proxies
that use knowledge of the network to correctly answer requests.
To prevent unsolicitd advertisements on the shared medium from
being a problem, on such deployments wireless needs to drop them.
Enable this by providing an option called "drop_unsolicited_na".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit aec215e7aa380fe5f85eb6948766b58bf78cb6c3)
Change-Id: Iad429a767a786087b0985632be44932b2e3fd1a8
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
In order to solve a problem with 802.11, the so-called hole-196 attack,
add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if
enabled, causes the stack to drop IPv6 unicast packets encapsulated in
link-layer multi- or broadcast frames. Such frames can (as an attack)
be created by any member of the same wireless network and transmitted
as valid encrypted frames since the symmetric key for broadcast frames
is shared between all stations.
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit dede82143bf1bbf92ea73a519bb0298b19c56cb9)
Change-Id: I76c8f84b53e95c40ad3c2b5adac0ec4964cc920c
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
In order to solve a problem with 802.11, the so-called hole-196 attack,
add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if
enabled, causes the stack to drop IPv4 unicast packets encapsulated in
link-layer multi- or broadcast frames. Such frames can (as an attack)
be created by any member of the same wireless network and transmitted
as valid encrypted frames since the symmetric key for broadcast frames
is shared between all stations.
Additionally, enabling this option provides compliance with a SHOULD
clause of RFC 1122.
Change-Id: I8de9fa5bdbea0556802f2ee553d0e73c1349213e
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
*) Implements sysfs proximity_state so that fp reader
can be disabled by PocketMode app.
*) Code fragments copied from fpc1020 driver where possible.
Change-Id: If0e6fa3172e1546d989de8522b2bdd734a3840a6
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
cpuidle was disabled while entering suspend as part of commit
8651f97bd9 in order to work around some
ACPI bugs. However, there's no reason to do this on modern
platforms. Leaving cpuidle enabled can result in improved power
consumption if dpm_resume_noirq runs for a significant time.
Change-Id: Ie182785b176f448698c0264eba554d1e315e8a06
When this copy_to_user() fails, the mutex won't be unlocked. Fix it.
Change-Id: I99c93fd04e812d187b83ff375d95a2abba82f501
Signed-off-by: Sultanxda <sultanxda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
Caused by latest block changes from 06100.
struct backing_device_info is not available anymore.
Change-Id: I47ca095ffbad02c3d9158d869d89485ed005435f
Signed-off-by: Alexander Martinz <alex@amartinz.at>
BFQ-v8r12 up to 887cf43acdb1d5415fa678e4a63be8fe1bab2d3a
Change-Id: I4725397969026ff9fa969d598c4378f24800c31d
Signed-off-by: Alexander Martinz <alex@amartinz.at>
A set of processes may happen to perform interleaved reads, i.e.,requests
whose union would give rise to a sequential read pattern. There are two
typical cases: in the first case, processes read fixed-size chunks of
data at a fixed distance from each other, while in the second case processes
may read variable-size chunks at variable distances. The latter case occurs
for example with QEMU, which splits the I/O generated by the guest into
multiple chunks, and lets these chunks be served by a pool of cooperating
processes, iteratively assigning the next chunk of I/O to the first
available process. CFQ uses actual queue merging for the first type of
rocesses, whereas it uses preemption to get a sequential read pattern out
of the read requests performed by the second type of processes. In the end
it uses two different mechanisms to achieve the same goal: boosting the
throughput with interleaved I/O.
This patch introduces Early Queue Merge (EQM), a unified mechanism to get a
sequential read pattern with both types of processes. The main idea is
checking newly arrived requests against the next request of the active queue
both in case of actual request insert and in case of request merge. By doing
so, both the types of processes can be handled by just merging their queues.
EQM is then simpler and more compact than the pair of mechanisms used in
CFQ.
Finally, EQM also preserves the typical low-latency properties of BFQ, by
properly restoring the weight-raising state of a queue when it gets back to
a non-merged state.
Change-Id: I9c626abcc591f9d9bc82fa535b7a11a38b6f89cb
Signed-off-by: Mauro Andreolini <mauro.andreolini@unimore.it>
Signed-off-by: Arianna Avanzini <avanzini@google.com>
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The general structure is borrowed from CFQ, as much of the code for
handling I/O contexts. Over time, several useful features have been
ported from CFQ as well (details in the changelog in README.BFQ). A
(bfq_)queue is associated to each task doing I/O on a device, and each
time a scheduling decision has to be made a queue is selected and served
until it expires.
- Slices are given in the service domain: tasks are assigned
budgets, measured in number of sectors. Once got the disk, a task
must however consume its assigned budget within a configurable
maximum time (by default, the maximum possible value of the
budgets is automatically computed to comply with this timeout).
This allows the desired latency vs "throughput boosting" tradeoff
to be set.
- Budgets are scheduled according to a variant of WF2Q+, implemented
using an augmented rb-tree to take eligibility into account while
preserving an O(log N) overall complexity.
- A low-latency tunable is provided; if enabled, both interactive
and soft real-time applications are guaranteed a very low latency.
- Latency guarantees are preserved also in the presence of NCQ.
- Also with flash-based devices, a high throughput is achieved
while still preserving latency guarantees.
- BFQ features Early Queue Merge (EQM), a sort of fusion of the
cooperating-queue-merging and the preemption mechanisms present
in CFQ. EQM is in fact a unified mechanism that tries to get a
sequential read pattern, and hence a high throughput, with any
set of processes performing interleaved I/O over a contiguous
sequence of sectors.
- BFQ supports full hierarchical scheduling, exporting a cgroups
interface. Since each node has a full scheduler, each group can
be assigned its own weight.
- If the cgroups interface is not used, only I/O priorities can be
assigned to processes, with ioprio values mapped to weights
with the relation weight = IOPRIO_BE_NR - ioprio.
- ioprio classes are served in strict priority order, i.e., lower
priority queues are not served as long as there are higher
priority queues. Among queues in the same class the bandwidth is
distributed in proportion to the weight of each queue. A very
thin extra bandwidth is however guaranteed to the Idle class, to
prevent it from starving.
Change-Id: I1c789ca3c2eb93972d742f82ee729cfe5fb7170c
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Arianna Avanzini <avanzini@google.com>
If the led request the PWM mode and the initial mode is PWM
when change the led pwm mode, it will fail to change pwm mode
for no mode change with a uninitialized return code and cause
the LED configuration failing
Change-Id: I29ba3823fb7b4f0d1b2a0d9f22c464c94fbe9717
Signed-off-by: yanyh2 <yanyh2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1072946
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Coverity Analysis <coverity@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
pppolac driver incorrectly enqueues the packet into the sock queue
without pulling UDP headers. The application will receive data along
with UDP header when L2TP control packets are received.
The issue was introduced after moving UDP header removal functionality
from process rcvmesg context to BH context.
Instead of pppolac driver directly queuing L2TP control packets into
socket queue, return packet to udp_queue_rcv_skb, which will deliver the
packet to the application after pulling the UDP header.
Fixes: e6afc8ace ("udp: remove headers from UDP packets before queueing")
Change-Id: Icfa0fd8da43ea9c14fa7c718746a6529651ac202
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org>
Acked-by: Sharath Chandra Vurukala <sharathv@qti.qualcomm.com>
Smp2p test code is used internally to test the
functionality of drivers and has no real use case
in end product.
Change-Id: I7a50c077bb71068188b5411424c5782b3d0edbb7
Signed-off-by: Hardik Arya <harya@codeaurora.org>
Currently, when a client invokes the service-locator to get
the domain list for a service, a data structure is dynamically
allocated to hold this information, and that is given to the
client for use. However, after the client uses the domain list,
the data structure is not freed, resulting in a memory leak.
Free domain list data structure after client use to fix
memory leak.
Change-Id: I2b87afefbb35c2c296b4267450fa3152e3725ab9
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Added sysfs entries to show kgsl memory usage statistics.
gpumem_mapped: kgsl memory mapped in the process address space.
gpumem_unmapped: kgsl allocated memory but not mapped in process.
imported_mem: graphics memory not allocated by the kgsl.
Below is the sysfs path for new entries:
/sys/class/kgsl/kgsl/proc/<pid>/
Change-Id: I08c2014d28dc0ca1e2b54ebf966d00143b303b54
Signed-off-by: Amit Kushwaha <kushwaha@codeaurora.org>
Exclude 4 bytes which holds the size of the buffer while calculating
the actual buffer size to avoid OOB write.
Change-Id: I5471fabc3652a942797019c5beb06d17a713b079
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
