Currently, profile integrity register is using only bit 0 to
indicate whether the profile is loaded or not. Now that the
profile can be loaded and/or fuel gauge can be restarted by the
bootloader, extend the usage of that word by using other bits
to provide more information. This is to aid the debugging.
Change-Id: Ib04ab10998de2f57b05cd976c3e9c8a1e2f4c574
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
When a debug board is present, battery ID will be something like
7 Kohms. Expose a fake battery SOC when this is detected. This
will help avoiding the device shutdown if a low battery voltage
is seen by FG and state of charge goes to 0.
Change-Id: I750b2adfb00f12960f74bd552a5896f66ecaece6
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
GCC clock controller is required to be enabled for all peripheral clocks
supported by global clock controller.
Change-Id: I11c6cc7f09b403a09bdf65a14f7b9d327c5d9613
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The fmax & num_fmax have been updated to reflect the new variable names and
also fall back to branch clocks clock_ops for hardware branch clocks for
now until the new ops are available.
Change-Id: I8b86ebbabe37bb86bd20eafe9501c4677f21a553
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add driver support to configure mempools from the device tree.
This will enable mempools to configure per device specific and
reduces the high kgsl memory usage based on configuration.
CRs-Fixed: 1064046
Change-Id: I0a7e36b7e1fef9d42a4c0fe33d69a4debf15af2f
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
GCC region has been mapped by regmap instead of devm_ioremap_resource.
So to map modem restart register which is part of gcc region requires
devm_ioremap otherwise mapping error occurs.
Change-Id: I1d97d8ef831e3a91df47eebf22e1156d0a3712ae
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Bring in updates from msmcortex defconfigs to msmfalcon's.
Change-Id: Iedbae0d4738c7badf3d4faf60f43e8c8bdab51e1
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
In combo usecase there are 2 front-end dai's with
same codec dai, for example, multi-phrase ADSP SVA detection.
Using a single bit as the counter causes the counter to roll
over to 0 during combo usecase.
To resolve this, change counter to unsigned int from single bit.
CRs-Fixed: 1086127
Change-Id: I2dd07bd967b7d4fb4878b6d65bd0f011c6b15bdd
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Ensure that device pointer isn't NULL before using it in
kgsl_snapshot_save_frozen_objs().
Change-Id: I676dfa5567b1d09427e3e7691045fabc71b53d43
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Change of colocation group requires to finish CPU busy time accounting
prior to its operation by calling update_task_ravg(). However when
window statistics accounting is disabled, update_task_ravg() acts as
nop and results in incorrect CPU time accounting.
Disallow colocation group change while window statistics accounting is
disabled in order to prevent race between reset_all_window_stats() and
colocation grouping functions.
Change-Id: I6dfa20b8d8b0ae7ccc94119bf9cf14c5e11a1cf7
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
The bandwidth vote determines the bus throughput needed for a
given running UFS gear frequency. For high throughput use cases
the current interface speed based votes may not be sufficient to
achieve peak user level throughput, as it doesn't count for other
system level latencies in the data path. Hence vote higher but
making sure the system stays in nominal voltage corner.
Change-Id: I95cda7e33288df7099826b37c2f436c5a33792e8
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
For DMA pipes, bufer size is 0. This commit fixes a
division by 0 in kernel when connecting DMA pipes.
Change-Id: I11551594e5115e71aa116cc7238953205a4118c3
CRs-Fixed: 1085266
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Clients of VADC_HC and BTM include reading voltage phone
power, system thermistors for thermal mitigation such as
msm_therm, case_therm, XO therm. Round robin ADC (RRADC)
provides clients ability to read supported channels from
PMfalcon RRADC such as battery ID, battery thermistors,
DCIN and USBIN voltage and current. Add the supported VADC,
BTM and RR ADC channels for the msmfalcon platforms.
Change-Id: I1b8bf9762642e0af73d7ac7fa51c974b93fd4b31
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Add 352800Hz into pcm known rates to match with the sound
sample rate macro definitions.
CRs-Fixed: 1082850
Change-Id: Iedd78288f71ddcaa9fcb2f63bd3b73be2c0006dd
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
The msmcobalt interposer target has interposed with pm_falcon pmic.
Remove the pm_cobalt regulator handler reference, clock and smmu
memory address and offset from the ICNSS DT node. Allow ICNSS DT
node compilation for msmcobalt interposer target.
CRs-Fixed: 1085547
Change-Id: I4aa1b9876bf1afd9b895d89dc5c4323ba3a3f661
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Ignore suspend flag is not set for "MAD_CPE" out widgets, causing
device not to go into suspend state during voice activation. Set
ignore suspend flag to allow suspend during SVA use case.
Change-Id: I18b7cb311e793c820da10990c47f472f7a0d0944
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
