The fmax corner frequencies have got updated, and also new frequencies have
been added for few clocks, so fix and update the same.
Change-Id: Ic6e2c2208a8971b07ed6ccfc8d63091e4692301f
Signed-off-by: Taniya Das <tdas@codeaurora.org>
This change enables USB RNDIS and RMNET drivers for BAM2BAM communication.
Change-Id: Ibfd9d12503248a3589bbda94096d40856ccba2c4
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
If PMIC provides boost power for VBUS in host mode, it may
need to know the amount of current of an attached device
in order to optimize for overall power consumption. We can
pass the bMaxPower obtained from a device's configuration
descriptor when it is attached. This only affects devices
(including hubs) directly attached to the root port, as
any device downstream of a hub will either consume part of
the hub's budget or has external power.
Change-Id: I1ad2cfecb7a2f6bdeaced29a1753cdc1bf3849db
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add initial set of configuration for GPU mempools
to reserve page pools at init time of kgsl driver.
Change-Id: I088aafe8cef621550b1776ca5a652c66e8ac5b62
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Remove dev reference in icnss_set_wlan_mac_address as
this function is called by external module and won't
be able to get ICNSS dev pointer.
CRs-Fixed: 1099641
Change-Id: I21c992676c41b6cdc3ea53722806e8d0be78d9d5
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Compilation error fix for 32 bit version mpq demux common plugin
Change-Id: Id2472097e115f1c8d09886c1a1ceb01c4f5c5f4b
CRs-Fixed: 1090466
Signed-off-by: Udaya Mallavarapu <udaym@codeaurora.org>
Current code is resizing each USB IN endpoint's TXFIFO to 1KB if it is
not USB GSI endpoint or bursting is not enable. In some high throughput
test case where there is contention in terms of accessing DDR memory
through SNOC between USB3 and other peripheral PCIE, there are many
underrun errors (i.e. Bad Data Length/Bad CRC) observed. These errors
results into retransmision of USB packets and sometime dropping packets
causing diffrent kind of data stalls. Hence fix this issue by increasing
TXFIFO size as 3KB with endless USB IN endpoint (i.e. USB BAM2BAM
endpoint) which helps to successfully retransmit packets.
Change-Id: I73860a7bb252a0226b591a5f732e6a7b864911cf
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
