Privcmd calls are issued by the userspace. The kernel needs to enable
access to TTBR0_EL1 as the hypervisor would issue stage 1 translations
to user memory via AT instructions. Since AT instructions are not
affected by the PAN bit (ARMv8.1), we only need the explicit
uaccess_enable/disable if the TTBR0 PAN option is enabled.
Reviewed-by: Julien Grall <julien.grall@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: I927f14076ba94c83e609b19f46dd373287e11fc4
(cherry picked from commit 8cc1f33d2c9f206b6505bedba41aed2b33c203c0)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
When TTBR0_EL1 is set to the reserved page, an erroneous kernel access
to user space would generate a translation fault. This patch adds the
checks for the software-set PSR_PAN_BIT to emulate a permission fault
and report it accordingly.
This patch also updates the description of the synchronous external
aborts on translation table walks.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: I623113fc8bf6d5f023aeec7a0640b62a25ef8420
(cherry picked from commit be3db9340c8011d22f06715339b66bcbbd4893bd)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
[Conflict fixes in lsk-v4.4-android topic branch]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
When the TTBR0 PAN feature is enabled, the kernel entry points need to
disable access to TTBR0_EL1. The PAN status of the interrupted context
is stored as part of the saved pstate, reusing the PSR_PAN_BIT (22).
Restoring access to TTBR0_PAN is done on exception return if returning
to user or returning to a context where PAN was disabled.
Context switching via switch_mm() must defer the update of TTBR0_EL1
until a return to user or an explicit uaccess_enable() call.
Special care needs to be taken for two cases where TTBR0_EL1 is set
outside the normal kernel context switch operation: EFI run-time
services (via efi_set_pgd) and CPU suspend (via cpu_(un)install_idmap).
Code has been added to avoid deferred TTBR0_EL1 switching as in
switch_mm() and restore the reserved TTBR0_EL1 when uninstalling the
special TTBR0_EL1.
This patch also removes a stale comment on the switch_mm() function.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: Id1198cf1cde022fad10a94f95d698fae91d742aa
(cherry picked from commit d26cfd64c973b31f73091c882e07350e14fdd6c9)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This patch adds the uaccess macros/functions to disable access to user
space by setting TTBR0_EL1 to a reserved zeroed page. Since the value
written to TTBR0_EL1 must be a physical address, for simplicity this
patch introduces a reserved_ttbr0 page at a constant offset from
swapper_pg_dir. The uaccess_disable code uses the ttbr1_el1 value
adjusted by the reserved_ttbr0 offset.
Enabling access to user is done by restoring TTBR0_EL1 with the value
from the struct thread_info ttbr0 variable. Interrupts must be disabled
during the uaccess_ttbr0_enable code to ensure the atomicity of the
thread_info.ttbr0 read and TTBR0_EL1 write. This patch also moves the
get_thread_info asm macro from entry.S to assembler.h for reuse in the
uaccess_ttbr0_* macros.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: Idf09a870b8612dce23215bce90d88781f0c0c3aa
(cherry picked from commit 940d37234182d2675ab8ab46084840212d735018)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This patch takes the errata workaround code out of cpu_do_switch_mm into
a dedicated post_ttbr0_update_workaround macro which will be reused in a
subsequent patch.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: I69f94e4c41046bd52ca9340b72d97bfcf955b586
(cherry picked from commit 4398e6a1644373a4c2f535f4153c8378d0914630)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This patch moves the directly coded alternatives for turning PAN on/off
into separate uaccess_{enable,disable} macros or functions. The asm
macros take a few arguments which will be used in subsequent patches.
Note that any (unlikely) access that the compiler might generate between
uaccess_enable() and uaccess_disable(), other than those explicitly
specified by the user access code, will not be protected by PAN.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: Ic3fddd706400c8798f57456c56361d84d234f6ef
(cherry picked from commit a4820644c627b82cbc865f2425bb788c94743b16)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Executing from a non-executable area gives an ugly message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0e08
lkdtm: attempting bad execution at ffff000008880700
Bad mode in Synchronous Abort handler detected on CPU2, code 0x8400000e -- IABT (current EL)
CPU: 2 PID: 998 Comm: sh Not tainted 4.7.0-rc2+ #13
Hardware name: linux,dummy-virt (DT)
task: ffff800077e35780 ti: ffff800077970000 task.ti: ffff800077970000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
The 'IABT (current EL)' indicates the error but it's a bit cryptic
without knowledge of the ARM ARM. There is also no indication of the
specific address which triggered the fault. The increase in kernel
page permissions makes hitting this case more likely as well.
Handling the case in the vectors gives a much more familiar looking
error message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0840
lkdtm: attempting bad execution at ffff000008880680
Unable to handle kernel paging request at virtual address ffff000008880680
pgd = ffff8000089b2000
[ffff000008880680] *pgd=00000000489b4003, *pud=0000000048904003, *pmd=0000000000000000
Internal error: Oops: 8400000e [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 997 Comm: sh Not tainted 4.7.0-rc1+ #24
Hardware name: linux,dummy-virt (DT)
task: ffff800077f9f080 ti: ffff800008a1c000 task.ti: ffff800008a1c000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: Ifba74589ba2cf05b28335d4fd3e3140ef73668db
(cherry picked from commit 9adeb8e72dbfe976709df01e259ed556ee60e779)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
[Conflict fixes in lsk-v4.4-android topic branch]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
The newly introduced dcache_by_line_op macro is used at least in
one occassion at the moment to issue a "dc cvau" instruction,
which is affected by ARM errata 819472, 826319, 827319 and 824069.
Change the macro to allow for alternative patching in there to
protect affected Cortex-A53 cores.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[catalin.marinas@arm.com: indentation fixups]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: I450594dc311b09b6b832b707a9abb357608cc6e4
(cherry picked from commit 823066d9edcdfe4cedb06216c2b1f91efaf68a87)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The ARM errata 819472, 826319, 827319 and 824069 for affected
Cortex-A53 cores demand to promote "dc cvau" instructions to
"dc civac" as well.
Attribute the usage of the instruction in __flush_cache_user_range
to also be covered by our alternative patching efforts.
For that we introduce an assembly macro which both deals with
alternatives while still tagging the instructions as USER.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: If5e7933ba32331b2aa28fc5d9e019649452f0f6c
(cherry picked from commit 290622efc76ece22ef76a30bf117755891ab27f6)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Commit 77ee306c0a ("arm64: alternatives: add enable parameter to
conditional asm macros") extended the alternative assembly macros.
Unfortunately this does not really work as one would expect, as the
enable parameter in fact correctly protects the alternative section
magic, but not the actual code sequences.
This results in having both the original instruction(s) _and_ the
alternative ones, if enable if false.
Since there is no user of this macros anyway, just revert it.
This reverts commit 77ee306c0a.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: I608104891335dfa2dacdb364754ae2658088ddf2
(cherry picked from commit b82bfa4793cd0f8fde49b85e0ad66906682e7447)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Kexec and hibernate need to copy pages of memory, but may not have all
of the kernel mapped, and are unable to call copy_page().
Add a simplistic copy_page() macro, that can be inlined in these
situations. lib/copy_page.S provides a bigger better version, but
uses more registers.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Changed asm label to 9998, added commit message]
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: If23a454e211b1f57f8ba1a2a00b44dabf4b82932
(cherry picked from commit 5003dbde45961dd7ab3d8a09ab9ad8bcb604db40)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Currently we treat ESR_EL1 bit 24 as software-defined for distinguishing
instruction aborts from data aborts, but this bit is architecturally
RES0 for instruction aborts, and could be allocated for an arbitrary
purpose in future. Additionally, we hard-code the value in entry.S
without the mnemonic, making the code difficult to understand.
Instead, remove ESR_LNX_EXEC, and distinguish aborts based on the esr,
which we already pass to the sole use of ESR_LNX_EXEC. A new helper,
is_el0_instruction_abort() is added to make the logic clear. Any
instruction aborts taken from EL1 will already have been handled by
bad_mode, so we need not handle that case in the helper.
For consistency, the existing permission_fault helper is renamed to
is_permission_fault, and the return type is changed to bool. There
should be no functional changes as the return value was a boolean
expression, and the result is only used in another boolean expression.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Dave P Martin <dave.martin@arm.com>
Cc: Huang Shijie <shijie.huang@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: Iaf66fa5f3b13cf985b11a3b0a40c4333fe9ef833
(cherry picked from commit 541ec870ef31433018d245614254bd9d810a9ac3)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Several places open-code extraction of the EC field from an ESR_ELx
value, in subtly different ways. This is unfortunate duplication and
variation, and the precise logic used to extract the field is a
distraction.
This patch adds a new macro, ESR_ELx_EC(), to extract the EC field from
an ESR_ELx value in a consistent fashion.
Existing open-coded extractions in core arm64 code are moved over to the
new helper. KVM code is left as-is for the moment.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Huang Shijie <shijie.huang@arm.com>
Cc: Dave P Martin <dave.martin@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: Ib634a4795277d243fce5dd30b139e2ec1465bee9
(cherry picked from commit 275f344bec51e9100bae81f3cc8c6940bbfb24c0)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Unlike the debug_fault_info table, we never intentionally alter the
fault_info table at runtime, and all derived pointers are treated as
const currently.
Make the table const so that it can be placed in .rodata and protected
from unintentional writes, as we do for the syscall tables.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I3fb0bb55427835c165cc377d8dc2a3fa9e6e950d
(cherry picked from commit bbb1681ee3653bdcfc6a4ba31902738118311fd4)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
If the kernel is set to show unhandled signals, and a user task does not
handle a SIGILL as a result of an instruction abort, we will attempt to
log the offending instruction with dump_instr before killing the task.
We use dump_instr to log the encoding of the offending userspace
instruction. However, dump_instr is also used to dump instructions from
kernel space, and internally always switches to KERNEL_DS before dumping
the instruction with get_user. When both PAN and UAO are in use, reading
a user instruction via get_user while in KERNEL_DS will result in a
permission fault, which leads to an Oops.
As we have regs corresponding to the context of the original instruction
abort, we can inspect this and only flip to KERNEL_DS if the original
abort was taken from the kernel, avoiding this issue. At the same time,
remove the redundant (and incorrect) comments regarding the order
dump_mem and dump_instr are called in.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org> #4.6+
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Fixes: 57f4959bad0a154a ("arm64: kernel: Add support for User Access Override")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I54c00f3598d227a7e2767b357cb453075dcce7bd
(cherry picked from commit c5cea06be060f38e5400d796e61cfc8c36e52924)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
To allow the assembler macros defined in arch/arm64/mm/proc-macros.S to
be used outside the mm code move the contents of proc-macros.S to
asm/assembler.h. Also, delete proc-macros.S, and fix up all references
to proc-macros.S.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
[rebased, included dcache_by_line_op]
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I09e694442ffd25dcac864216d0369c9727ad0090
(cherry picked from commit 7b7293ae3dbd0a1965bf310b77fed5f9bb37bb93)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This redefines ARM64_MEMSTART_ALIGN in terms of the minimal alignment
required by sparsemem vmemmap. This comes down to using 1 GB for all
translation granules if CONFIG_SPARSEMEM_VMEMMAP is enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I05b8bc6ab24f677f263b09d7c31fcce4f21269b1
(cherry picked from commit 06e9bf2fd9b372bc1c757995b6ca1cfab0720acb)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
After choosing memstart_addr to be the highest multiple of
ARM64_MEMSTART_ALIGN less than or equal to the first usable physical memory
address, we clip the memblocks to the maximum size of the linear region.
Since the kernel may be high up in memory, we take care not to clip the
kernel itself, which means we have to clip some memory from the bottom if
this occurs, to ensure that the distance between the first and the last
usable physical memory address can be covered by the linear region.
However, we fail to update memstart_addr if this clipping from the bottom
occurs, which means that we may still end up with virtual addresses that
wrap into the userland range. So increment memstart_addr as appropriate to
prevent this from happening.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I72306207cc46a30b780f5e00b9ef23aa8409867e
(cherry picked from commit 2958987f5da2ebcf6a237c5f154d7e3340e60945)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The implementation of macro inv_entry refers to its 'el' argument without
the required leading backslash, which results in an undefined symbol
'el' to be passed into the kernel_entry macro rather than the index of
the exception level as intended.
This undefined symbol strangely enough does not result in build failures,
although it is visible in vmlinux:
$ nm -n vmlinux |head
U el
0000000000000000 A _kernel_flags_le_hi32
0000000000000000 A _kernel_offset_le_hi32
0000000000000000 A _kernel_size_le_hi32
000000000000000a A _kernel_flags_le_lo32
.....
However, it does result in incorrect code being generated for invalid
exceptions taken from EL0, since the argument check in kernel_entry
assumes EL1 if its argument does not equal '0'.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: I406c1207682a4dff3054a019c26fdf1310b08ed1
(cherry picked from commit b660950c60a7278f9d8deb7c32a162031207c758)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Rather than crafting custom macros for reading/writing each system
register provide generics accessors, read_sysreg and write_sysreg, for
this purpose.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Change-Id: I1d6cf948bc6660dfd096ff5a18eba682941098c1
(cherry picked from commit 3600c2fdc09a43a30909743569e35a29121602ed)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This refactors the EFI init and runtime code that will be shared
between arm64 and ARM so that it can be built for both archs.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: Ieee70bbe117170d2054a9c82c4f1a8143b7e302b
(cherry picked from commit f7d924894265794f447ea799dd853400749b5a22)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This splits off the early EFI init and runtime code that
- discovers the EFI params and the memory map from the FDT, and installs
the memblocks and config tables.
- prepares and installs the EFI page tables so that UEFI Runtime Services
can be invoked at the virtual address installed by the stub.
This will allow it to be reused for 32-bit ARM.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I143e4b38a5426f70027eff6cc5f732ac370ae69d
(cherry picked from commit e5bc22a42e4d46cc203fdfb6d2c76202b08666a0)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Change the EFI memory reservation logic to use memblock_mark_nomap()
rather than memblock_reserve() to mark UEFI reserved regions as
occupied. In addition to reserving them against allocations done by
memblock, this will also prevent them from being covered by the linear
mapping.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: Ia3ce78f40f8d41a9afdd42238fe9cbfd81bbff08
(cherry picked from commit 4dffbfc48d65e5d8157a634fd670065d237a9377)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Take the new memblock attribute MEMBLOCK_NOMAP into account when
deciding whether a certain region is or should be covered by the
kernel direct mapping.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: Id7346a09bb3aee5e9a5ef8812251f80cf8265532
(cherry picked from commit 68709f45385aeddb0ca96a060c0c8259944f321b)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This introduces the MEMBLOCK_NOMAP attribute and the required plumbing
to make it usable as an indicator that some parts of normal memory
should not be covered by the kernel direct mapping. It is up to the
arch to actually honor the attribute when laying out this mapping,
but the memblock code itself is modified to disregard these regions
for allocations and other general use.
Cc: linux-mm@kvack.org
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change-Id: I55cd3abdf514ac54c071fa0037d8dac73bda798d
(cherry picked from commit bf3d3cc580f9960883ebf9ea05868f336d9491c2)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This CL removes the mandate of the fec_header being located right
after the ECC data.
(Cherry-picked from https://android-review.googlesource.com/#/c/280401)
Bug: 28865197
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ie04c8cf2dd755f54d02dbdc4e734a13d6f6507b5
Unfortunately we record PIDs in audit records using a variety of
methods despite the correct way being the use of task_tgid_nr().
This patch converts all of these callers, except for the case of
AUDIT_SET in audit_receive_msg() (see the comment in the code).
Reported-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Bug: 28952093
(cherry picked from commit fa2bea2f5cca5b8d4a3e5520d2e8c0ede67ac108)
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Change-Id: If6645f9de8bc58ed9755f28dc6af5fbf08d72a00
commit c74ba8b3480d ("arch: Introduce post-init read-only memory")
introduced the __ro_after_init attribute which allows to add variables
to the ro_after_init data section.
This new section was added to rodata, even though it contains writable
data. This in turn causes problems on architectures which mark the
page table entries read-only that point to rodata very early.
This patch allows architectures to implement an own handling of the
.data..ro_after_init section.
Usually that would be:
- mark the rodata section read-only very early
- mark the ro_after_init section read-only within mark_rodata_ro
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Bug: 31660652
Change-Id: If68cb4d86f88678c9bac8c47072775ab85ef5770
(cherry picked from commit 32fb2fc5c357fb99616bbe100dbcb27bc7f5d045)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Commit d86b8da04dfa ("arm64: spinlock: serialise spin_unlock_wait against
concurrent lockers") fixed spin_unlock_wait for LL/SC-based atomics under
the premise that the LSE atomics (in particular, the LDADDA instruction)
are indivisible.
Unfortunately, these instructions are only indivisible when used with the
-AL (full ordering) suffix and, consequently, the same issue can
theoretically be observed with LSE atomics, where a later (in program
order) load can be speculated before the write portion of the atomic
operation.
This patch fixes the issue by performing a CAS of the lock once we've
established that it's unlocked, in much the same way as the LL/SC code.
Fixes: d86b8da04dfa ("arm64: spinlock: serialise spin_unlock_wait against concurrent lockers")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Bug: 30369029
Patchset: kaslr-arm64-4.4
(cherry picked from commit 3a5facd09da848193f5bcb0dea098a298bc1a29d)
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Change-Id: Icedaa4c508784bf43d0b5787586480fd668ccc49
When CONFIG_RANDOMIZE_BASE is selected, we modify the page tables to remap the
kernel at a newly-chosen VA range. We do this with the MMU disabled, but do not
invalidate TLBs prior to re-enabling the MMU with the new tables. Thus the old
mappings entries may still live in TLBs, and we risk violating
Break-Before-Make requirements, leading to TLB conflicts and/or other issues.
We invalidate TLBs when we uninsall the idmap in early setup code, but prior to
this we are subject to issues relating to the Break-Before-Make violation.
Avoid these issues by invalidating the TLBs before the new mappings can be
used by the hardware.
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # 4.6+
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 30369029
Patchset: kaslr-arm64-4.4
(cherry picked from commit fd363bd417ddb6103564c69cfcbd92d9a7877431)
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Change-Id: I6c23ce55cdd8b66587b6787b8f28df8535e39f24
Selecting CONFIG_RANDOMIZE_BASE=y and CONFIG_MODULES=n fails to build
the module PLTs support:
CC arch/arm64/kernel/module-plts.o
/work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c: In function ‘module_emit_plt_entry’:
/work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c:32:49: error: dereferencing pointer to incomplete type ‘struct module’
This patch selects ARM64_MODULE_PLTS conditionally only if MODULES is
enabled.
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # 4.6+
Reported-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 30369029
Patchset: kaslr-arm64-4.4
(cherry picked from commit b9c220b589daaf140f5b8ebe502c98745b94e65c)
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Change-Id: I446cb3aa78f1c64b5aa1e2e90fda13f7d46cac33
The ENERGY_AWARE sched feature flag cannot be set unless
CONFIG_SCHED_DEBUG is enabled.
So this patch allows the flag to default to true at build time
if the config is set.
Change-Id: I8835a571fdb7a8f8ee6a54af1e11a69f3b5ce8e6
Signed-off-by: John Stultz <john.stultz@linaro.org>
It will cause deadlock and while(1) if call printk while schedule is in
progress. The block state like as below:
cpu0(hold the console sem):
printk->console_unlock->up_sem->spin_lock(&sem->lock)->wake_up_process(cpu1)
->try_to_wake_up(cpu1)->while(p->on_cpu).
cpu1(request console sem):
console_lock->down_sem->schedule->idle_banlance->update_cpu_capacity->
printk->console_trylock->spin_lock(&sem->lock).
p->on_cpu will be 1 forever, because the task is still running on cpu1,
so cpu0 is blocked in while(p->on_cpu), but cpu1 could not get
spin_lock(&sem->lock), it is blocked too, it means the task will running
on cpu1 forever.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Adds tracepoints in ext4/f2fs/mpage to track readpages/buffered
write()s. This allows us to track files that are being read/written
to PIDs.
Change-Id: I26bd36f933108927d6903da04d8cb42fd9c3ef3d
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
On at least one platform, occasionally the timer providing the wallclock
was able to be reset/go backwards for at least some time after wakeup.
Accept that this might happen and warn the first time, but otherwise just
carry on.
Change-Id: Id3164477ba79049561af7f0889cbeebc199ead4e
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Prior restart function would make a call to sys_sync and then
execute a kernel reset. Rather than call the sync directly,
thus necessitating this driver to be builtin, call orderly_reboot,
which will take care of the file system sync.
Note: since CONFIG_INPUT Kconfig is tristate, this driver can be built
as module, despite being marked bool.
Signed-off-by: Eric Ernst <eric.ernst@linux.intel.com>
Instead of using sock_tx_timestamp, use skb_tx_timestamp to record
software transmit timestamp of a packet.
sock_tx_timestamp resets and overrides the tx_flags of the skb.
The function is intended to be called from within the protocol
layer when creating the skb, not from a device driver. This is
inconsistent with other drivers and will cause issues for TCP.
In TCP, we intend to sample the timestamps for the last byte
for each sendmsg/sendpage. For that reason, tcp_sendmsg calls
tcp_tx_timestamp only with the last skb that it generates.
For example, if a 128KB message is split into two 64KB packets
we want to sample the SND timestamp of the last packet. The current
code in the tun driver, however, will result in sampling the SND
timestamp for both packets.
Also, when the last packet is split into smaller packets for
retranmission (see tcp_fragment), the tun driver will record
timestamps for all of the retransmitted packets and not only the
last packet.
Change-Id: If7458ab31de52aa15a12364b6c1ac2a8f93f17a7
Fixes: eda2977291 (tun: Support software transmit time stamping.)
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Francis Yan <francisyyan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MADV_FREE needs pmd_dirty and pmd_mkclean for detecting recent overwrite
of the contents since MADV_FREE syscall is called for THP page.
This patch adds pmd_mkclean for THP page MADV_FREE support.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Shaohua Li <shli@kernel.org>
Cc: <yalin.wang2010@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jason Evans <je@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttil <mika.penttila@nextfour.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 30369029
Patchset: rework-pagetable
(cherry picked from commit 44842045e4baaf406db2954dd2e07152fa61528d)
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Change-Id: I59d53667aa8c40dea4f18fc58acc7d27f4a85a04
This adds the capability for a process that has CAP_NET_ADMIN on
a socket to see the socket mark in socket dumps.
Commit a52e95abf772 ("net: diag: allow socket bytecode filters to
match socket marks") recently gave privileged processes the
ability to filter socket dumps based on mark. This patch is
complementary: it ensures that the mark is also passed to
userspace in the socket's netlink attributes. It is useful for
tools like ss which display information about sockets.
[backport of net-next d545caca827b65aab557a9e9dcdcf1e5a3823c2d]
Change-Id: I33336ed9c3ee3fb78fe05c4c47b7fd18c6e33ef1
Tested: https://android-review.googlesource.com/270210
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
udp_diag_destroy does look up the IPv4 UDP hashtable for mapped
addresses, but it gets the IPv4 address to look up from the
beginning of the IPv6 address instead of the end.
[cherry-pick of net-next f95bf346226b9b79352e05508beececc807cc37a]
Change-Id: Ia369482c4645bcade320b2c33a763f1ce4378ff1
Tested: https://android-review.googlesource.com/269874
Fixes: 5d77dca82839 ("net: diag: support SOCK_DESTROY for UDP sockets")
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements SOCK_DESTROY for UDP sockets similar to what was done
for TCP with commit c1e64e298b8ca ("net: diag: Support destroying TCP
sockets.") A process with a UDP socket targeted for destroy is awakened
and recvmsg fails with ECONNABORTED.
[cherry-pick of 5d77dca82839ef016a93ad7acd7058b14d967752]
Change-Id: I4b4862548e6e3c05dde27781e7daa0b18b93bd81
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows a privileged process to filter by socket mark when
dumping sockets via INET_DIAG_BY_FAMILY. This is useful on
systems that use mark-based routing such as Android.
The ability to filter socket marks requires CAP_NET_ADMIN, which
is consistent with other privileged operations allowed by the
SOCK_DIAG interface such as the ability to destroy sockets and
the ability to inspect BPF filters attached to packet sockets.
[cherry-pick of a52e95abf772b43c9226e9a72d3c1353903ba96f]
Change-Id: I8b90b814264d9808bda050cdba8f104943bdb9a8
Tested: https://android-review.googlesource.com/261350
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This simplifies the code a bit and also allows inet_diag_bc_audit
to send to userspace an error that isn't EINVAL.
[cherry-pick of net-next 627cc4add53c0470bfd118002669205d222d3a54]
Change-Id: Iee3d2bbb19f3110d71f0698ffb293f9bdffc8ef1
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to inet_diag facility to filter sockets based on device
index. If an interface index is in the filter only sockets bound
to that index (sk_bound_dev_if) are returned.
[cherry-pick of net-next 637c841dd7a5f9bd97b75cbe90b526fa1a52e530]
Change-Id: I6b6bcdcf15d3142003f1ee53b4d82f2fabbb8250
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit ded89912156b1a47d940a0c954c43afbabd0c42c upstream
User-space can choose to omit NL80211_ATTR_SSID and only provide raw
IE TLV data. When doing so it can provide SSID IE with length exceeding
the allowed size. The driver further processes this IE copying it
into a local variable without checking the length. Hence stack can be
corrupted and used as exploit.
Cc: stable@vger.kernel.org # v4.4, v4.1
Reported-by: Daxing Guo <freener.gdx@gmail.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
