Add the qcom,hw-timer-hz property and enable qcom,bimc-bwmon4
device for msmcobalt to be able to use the BWMON2 hardware
instead of the legacy BWMON hardware.
Change-Id: I1d1c2e5d2fcf705d8ffd527ec7434d90cc004834
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Numerous changes were introduced to various layers:
Block: removed dependency on selinux module for decision on bio merge
EXT4: Added feature controlled support for HW encryption
PFK: Major re-factoring, separation to eCryptfs and EXT4 sub-layers
Change-Id: I9256c8736e1c16175fe3f94733dda430ccc57980
Signed-off-by: Andrey Markovytch <andreym@codeaurora.org>
Goodix GT9xx touchscreen driver supports up to six groups of config
data and uses hardware GPIO configuration to select which one will
be used. This change allows these six config groups to be loaded
from devicetree.
Change-Id: I9dfd698e7084164688dd964ed914d5eecc75ecd3
Signed-off-by: Bingzhe Cai <bingzhec@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Remove the GDSC not present in msmfalcon and also remove few clocks which
are not required to be controlled from GDSC driver.
Change-Id: I284197693722912919c59ec26cfae5e382da787b
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The version 4 of the BIMC BWMON hardware now has provisions for
counting bytes transferred at a high sampling rate.
Modify the existing driver and governor algorithm to
take advantage of that.
Change-Id: I5080297aef7e310d5c1a19098c177ddecb729c25
Signed-off-by: Rohit Gupta <rohgup@codeaurora.org>
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Inside glink_scheduler_tx tx_info is not validated after tx operation
and taking spin lock, since there are two functions which can release
the reference for tx_info while glink_scheduler_tx thread is preempted.
These functions are ch_purge_intent_lists and
ch_remove_tx_pending_remote_done.
Validate tx_info from tx_active list after tx operation and taking
spin lock.
CRs-Fixed: 1061565
Change-Id: I80c64d66625b9fe9205e8ffaa7cfc851e06fcb94
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Client driver may disconnect pipe while some data is still
pending on the pipe and might not need IRQ for that data. Current
implementation might result in crash in case disconnect and IRQ happens
on same pipe in parallel. Implement lock to avoid pipe disconnect
while IRQ is in progress for that pipe and viceversa.
Change-Id: Icf43c0a18cfc1644270b684a792632a6c81f1797
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Add device tree info for Secure Processor Subsystem Utilities driver.
Change-Id: I2657705131fcbbcc63a723b3badb3f43135b4408
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
On msm-4.4, conditional paths are not supported for
supply widgets. Using SND_SOC_DAPM_MUX instead of
using Switches to connect to the native supply.
CRs-Fixed: 1066167
Change-Id: If015dbad0e168e41f1c8c86b502d4cf5fb592045
Signed-off-by: Meng Wang <mwang@codeaurora.org>
commit 70a7fb80e85a ("regulator: core: Fix nested locking of supplies")
Commit fa731ac7ea04 ("regulator: core: avoid unused variable warning")
introduced a subtle change in how supplies are locked. Where previously
code was always locking the regulator of the current iteration, the new
implementation only locks the regulator if it has a supply. For any
given power tree that means that the root will never get locked.
On the other hand the regulator_unlock_supply() will still release all
the locks, which in turn causes the lock debugging code to warn about a
mutex being unlocked which wasn't locked.
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: fa731ac7ea04 ("regulator: core: avoid unused variable warning")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 70a7fb80e85ae7f78f8e90cec3fbd862ea6a4d4b
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[ashayj@codeaurora.org: Fix the regulator bug which was re-introduced by
commit f145f4]
CRs-Fixed: 1065539
Change-Id: I376a6412bb65a1e193647eab54ad993df4c2c24f
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
WCD934X audio codec supports idle detection over headphone
path to reduce power consumption when the audio signal
level is low. Add support to enable headphone idle detection
in the wcd934x codec driver.
CRs-fixed: 1066588
Change-Id: I8d67fa4055898db31b47f87b6659484aeb08f58f
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Explicitly send device disconnect notification to client
so that client can disable audio streams. This will in turn
enable sound usb driver to release usb device and notify device
removal to user-space. User-space will clean up audio session.
Without this change sound usb driver is blocking usb device
release till audio streams are disabled. However, audio streams
are only disabled when user-space cleans up audio session on usb
device removal which is blocked. This change is trying to fix
this deadlock condition by notifying device disconnect to clients
explicitly.
Change-Id: I7e5a8aca84a7a620bb61eb0ace8a6b6c622f89de
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
The current api which performs the clock reset is moved to use the reset
framework, so support the changes in ufs driver for the same. The reset
framework requires to get reset handle and perform assert/deassert of the
resets.
Change-Id: I78d833639772cf541e563cbf9fae1aa75ec6a7da
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Create codec entry for wcd934x codec so that userspace can retrieve
the codec info.
CRs-Fixed: 1063367
Change-Id: Ie846b5edf1d8aaecce5140986dad8da69d608d5a
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
As there are many hardware version of wcd934x codec. Add version
check in the code so that userspace can get the version info.
CRs-Fixed: 1063367
Change-Id: Ia320380d568426c2d7a414a832980a556ff27f0f
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
EQ bias is enabled in of msmcobalt version 2 csiphy.
Differentiate this setting with new version 2 camera dt file.
CRs-Fixed: 1050172
Change-Id: I5781453f2b2a81b9cf5f7fb643e021b53879583e
Signed-off-by: Viswanadha Raju Thotakura <viswanad@codeaurora.org>
The spss-util driver provides utilities required for the SPSS.
It provides the fuse state for key selection.
It provides the SPSS HW version.
Change-Id: I70c37d64db351db86e3d1d5dddb810257c68d72f
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
The function regulator_set_optimum_mode() has been renamed to
regulator_set_load(). So update the driver accordingly.
Change-Id: I7d69a4529368918f159a25769f497e6425838460
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
Correct return value check of gtp_read_fw_version, called in probe
of the Goodix driver. The return value is actually the number of
registers read through gtp_i2c_read() function call.
Also change the error message of gtp_check_product_id.
Change-Id: I0b643e250a487f08a19555237802b020b0873d1a
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Use standard initializer code in gtp_i2c_read and
gtp_i2c_write functions for Goodix touchscreen driver.
Change-Id: Id954be61a0b4596339a659928fb630c5c5538a9a
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Replace non-standard debug function with the conventional
functions in Goodix driver. And remove unnecessary debug
function used in Goodix driver.
Change-Id: Ia89d225333c1309710aab67b9c406784567e3050
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
MSM GPIO 69 is used as a clock for native playback
on msmcobalt. Add the GPIO 69 configuration along with
pinctrl information.
CRs-Fixed: 1066167
Change-Id: Icd3e82a754867c0f16035a5f3eb7f86ee57c7281
Signed-off-by: Meng Wang <mwang@codeaurora.org>
