This change handles below cases and improves performance:
1. If USB OUT request buffer is bigger than provided read buffer
from application, then data equal to read buffer is copied. This
results into data loss. Handle this case by making sure that
whole USB OUT request buffer is provided to application across
multiple read() call.
2. If read buffer size is greater than available data as part of
one USB OUT request buffer, then copy data from other USB OUT
request buffers until read buffer is filled completely.
Change-Id: If2756ed82bd6e95650ebcc38c4042bfb593f8a2b
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
In some cases, it has been observed that all USB TX requests are
queued with USB controller and port bridge is trying to write data.
gbridge_port_write() API is returning zero (success of data) instead
of error code which results into data loss. Hence return -EAGAIN
when there is no USB TX request available. Also mark this error as
non-fatal by using pr_debug() here.
Change-Id: Id56788b372b62a005448a729e5f00de6fb895e47
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Currently on USB composition switch or USB cable disconnect,
USB RX requests are being added as part of read_queued list
instead of read_pool. In some cases it is seen that if port
bridge is trying to read data, those requests are requeued
and fails with -ESHUTDOWN, and again it continues with results
into watchdog timeout due to error log coming from read request
completion handler. Fix this by adding proper check in read
request completion handler.
Also reduce USB Tx/RX buffer size from PAGE_SIZE to 2048 bytes.
It also fixes issue where USB RX requests are not being queued
after USB composition switch.
CRs-Fixed: 854301
Change-Id: I3616dc35c093cfa19865891f46e7b1ccc7302573
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
This driver provides character device node (/dev/at_usb0)
to user space application for file operations like open,
close, read, write, poll and ioctl (for control signals).
This change also adds required support to use this new
character bridge driver with existing USB Serial driver
and android gadget driver.
Change-Id: I26f297636de585d3fd99d10fac76ecb71f852df3
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
The current driver uses a boolean flag psy_registered to track
whether the power supplies are initialized. Instead check if the
psy pointers are non null to ensure they are initialized.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
update seemp_api header file
update seemp_parm_id header file
update seemp_core to log data with blk header set to 64B
remove logging from fs proc base and net socket modules
Change-Id: I583e3129d62651b155b0372e173564d5a17e3153
Signed-off-by: Mona Hossain <mhossain@codeaurora.org>
Add more seep parameters for frameworks refactoring.
Change-Id: I9807ef0dc6d5a54c82dea64cec68be3fd0ff7396
Signed-off-by: William Clark <wclark@codeaurora.org>
The change fixes event parameter encoding for seemp. It will
prevent an assert in seemp functioning
Change-Id: Ib3681d526a1dfb45cd5de5a40ee8cf07e02296dd
Signed-off-by: William Clark <wclark@codeaurora.org>
Improves the ability of a malware protection program
to detect anomalies in various activities. It records
task activities in a log and rates the actions
according to how a typical user would use the tools.
Change-Id: I976bc97f57215f173b046326b5f905522d785288
Signed-off-by: Mona Hossain <mhossain@codeaurora.org>
Signed-off-by: William Clark <wclark@codeaurora.org>
Enable 11ad msm platform driver by default. The driver
must be built-in within kernel so that by default it turns
off any power related to the 11ad chipset when connected
to msm.
Change-Id: Ice3a85fcd5e3c10fbe3193d52d6d4cf26f0abe74
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
WA for HW errata for PCIe in MSM8998 v1, QCTDD02664351.
Due to this issue, PCIe write ordering rule may be violated
causing cluster to read older data from its L2 cache, in specific
scenario.
To avoid that for wil6210 rx transactions, we set "no snoop" for
PCIe wr transactions (from device to host).
For configuring the above bit 4 of 0x8812C4 register is set.
Signed-off-by: Maya Erez <merez@codeaurora.org>
In the current solution wil6210 configures the vring in a worker
and holds only one pending CID. This implementation may lead to
race conditions between connect and disconnect events of multiple
stations or fast connect/disconnect events of the same station.
In order to allow the removal of the connect worker and handling of
WMI_VRING_CFG_DONE_EVENTID in the connect event, the WMI replies
that provide the reply in a given buffer needs to be handled
immediately in the WMI event interrupt thread.
To prevent deadlocks, WMI replies that requires additional
handling are still handled via the events list.
Change-Id: I81f08011ef98be845d98fbe15d98bbf050032f88
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 0916d9f2b6bea53a830ae5061b63a515c04da62e
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 971604
Signed-off-by: Maya Erez <merez@codeaurora.org>
In TX vring allocation, vring_tx->va is allocated before WMI command to
configure the vring is sent to the device. As the WMI command can take
time to complete, it can lead to scenarios where vring_tx->va is not NULL
but vring is still not enabled.
This patch adds a check that vring_tx_data is enabled before returning
a valid TX vring.
Change-Id: I21bad8fdbb7bb0ff8fe0447efb94dbfd69f4e6b0
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: b729aaf066b013458e95cd6c69a5e371eb9ce355
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 971604
Signed-off-by: Maya Erez <merez@codeaurora.org>
wil_vring_fini_tx is called in disconnect in order to free the
allocated vrings.
wil_vring_fini_tx is disabling the vring_tx_data before napi_synchronize
is called in order to avoid the tx handling of this vring, while
wil_vring_free is called only after napi finished the current handling
of the tx completed packets.
Due to that, in case of disconnect, wil6210_netdev_poll_tx can be called
when vring->va is not NULL but vring_tx_data[i]->enabled is already
disabled.
This patch checks vring_tx_data[i]->enabled in wil6210_netdev_poll_tx
to prevent handling of disabled vrings.
Change-Id: I6c38be5b47eb3c34ccb4b503545fccada26806e4
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 640751ac30b2ddfbe06ad712aa7d57a8d89a7eef
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 971604
Signed-off-by: Maya Erez <merez@codeaurora.org>
In the start_ap/change_beacon API, when we set up probe response
offloading, we only use the IE list from the probe response
template and not the IE list from the proberesp_ies argument.
As a result, we miss important IEs and it causes problems with
some scenarios such as P2P.
With this change, we merge the list of IEs from the probe response
template and proberesp_ies and send the merged list to the FW
for offloading. It is still FW responsibility to filter out
irrelevant IEs when sending probe response, based on the actual
contents of the probe request.
Also in case association response termplate is not provided,
we will use the merged list of IEs from probe response in the
association response as well.
Change-Id: Ic21e9a70f64af67c630dc710ccd6825879f872b6
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: c100c883e785802ab333604237928a65ae62c6bc
Git-repo: https://github.com/kvalo/ath.git
CRs-Fixed: 970919
Signed-off-by: Maya Erez <merez@codeaurora.org>
Currently the privacy flag calculation in change_beacon
checks for RSN IE inside proberesp_ies, but normally it
is not found there. It works today because of code inside
the function wil_fix_bcon, but wil_fix_bcon is not directly
related to change_beacon, and it may be changed or removed
in the future and break the calculation.
To fix this issue, change the privacy flag calculation
to check RSN IE inside the beacon itself. The new check is more
reliable and will not be sensitive to changes in wil_fix_bcon.
Change-Id: Ida5b55f6456d04e22303fedddc8c77c5ad081177
CRs-Fixed: 970919
Signed-off-by: Lior David <liord@codeaurora.org>
On platforms where the power supply for 11AD is external
the wil6210 driver has to vote for the VDD and VDDIO regulators.
This patch adds such voting and guarantees the required
voltage for each regulator.
Change-Id: I472fe6b0600557bc4e623a3dd1b6352fd4a86e27
[merez@codeaurora.org: using regulator_set_load]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Add 11ad as a subsystem (WIGIG) within the subsystem_restart
framework, in order to allow proper support for recovery from
11ad firmware crashes, and support automated collection of
crash dumps for offline analysis and bug reporting.
Change-Id: I7acbe8860e046cdba2ce027f91ed2fa995a70c70
Signed-off-by: Lior David <liord@codeaurora.org>
[merez@codeaurora.org: fixed merge conflicts]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Added a simple interface for platform to perform crash
recovery.
When firmware crashes, wil driver can notify the platform
which can trigger a crash recovery process. During
the process the platform can request a ram dump
from the wil driver as well as control when firmware
recovery will start. This interface allows the platform
to implement a more advanced crash recovery, for
example to reset dependent subsystems in proper order, or
to provide its own notifications during the recovery process.
Change-Id: I2545d220b779c24931b6263249449f37bcad75a4
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: ea3ade75db690dc47c78a77d71dfd7c2df3bb15d
Git-repo: https://github.com/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
When network interface is stopping, some resources may
be already released by the network stack, and Rx frames
cause kernel OOPS (observed one is in netfilter code)
Proper solution is to drop packets pending in reorder buffer.
Change-Id: Id043d466135f20fe980814380e6f01e2554c22e3
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: dea16eddb4753129dbcd8dc8d1a58ff0cc4ea38c
Git-repo: https://github.com/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
"iter" is -1 at the end of the loop and not zero. It means we don't
print a warning message.
Change-Id: I532bd54fbdafb92e71205c317ae5d467c4cd5f3b
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: f94c48d6c315a580b60b062c0360561b61faa311
Git-repo: https://github.com/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
In __wmi_send we check if fw is ready at the beginning of the function.
While we wait for the completion of the previous command, system suspend
can be invoked and reset the HW, causing __wmi_send to read from HW
registers while it is not ready.
Taking the wmi_mutex in the reset flow when setting the FW ready bit
to zero will prevent the above race condition.
Change-Id: I5d2e823a27beaeaaf5b8b1e25457c158efd3ea46
Signed-off-by: Maya Erez <merez@codeaurora.org>
Some platforms don't support the wigig_en GPIO.
Changing wigig_en to be an optional property allows
removing the redundant setting of this GPIO in platforms
that do not support it.
Change-Id: Iad33d3876c1657cc4cc6b779b11d1c634f58a243
Signed-off-by: Maya Erez <merez@codeaurora.org>
msm root-complex does not maintain parent/child relationship
with PCIe devices. Due to this, suspend operation may be carried
out asynchronously between PCIe device and root-complex.
In cases where 11ad refuses to suspend for any reason, the
root-complex connected to it may get suspended in parallel,
causing inconsistency between root-complex and 11ad device.
Disabling async suspend ensures proper ordering of suspend
between PCIe device and root-complex.
Change-Id: I42749d6af229721dc420b55b91e78bf58923d67f
CRs-Fixed: 933571
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
hostap in Android issues private ioctls in some scenarios,
specifically P2P and WPS.
Currently 11ad driver supports WPS but not P2P, when WPS
is enabled IE related to WPS in P2P is sent through
private ioctl and fails which blocks WPS.
Add handling of this command so that WPS could be
enabled outside of P2P flow.
Change-Id: Id67174ad128b47a6b6244b1fe48b0e535b397247
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Sleep clock may be used by 11ad chip to support
low power modes.
Change-Id: I00c9c5f3d24fa47463f5d0fe4aecc97ab09334b9
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
[merez@codeaurora.org: fixed merge conflicts]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Config space was not properly restored when
resuming from suspend.
Change-Id: I6b9188f3989957eb44c93302d7958d422bb29e81
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Set DOMAIN_ATTR_ATOMIC attribute to SMMU driver so that
it can handle DMA map/unmap operations from atomic context
which is required by 11ad driver
Change-Id: I7e538e6c41e5f40ff01dcfc9cbecf860ded22057
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Delay is required to wait for the PCIe endpoint to become
stable after power on before de-assertion of PERST to
the endpoint by PCIe root complex.
Change-Id: Ib064e936fa0540646e6751d7c3b739c0beb48e60
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Failure of memory allocation for context was
not properly checked. Added proper check against
valid context value in relevant locations.
Change-Id: Ia74ddfb3c54e2781957e695a831c30f1356fed08
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Platform driver used to handle msm specific platform
requirement for 11ad chipset connected to msm platform
Takes care of platform support like:
- power switch through dedicated GPIO
- bus frequency voting
- SMMU attachment
Change-Id: I09c54ea747a5b4e0688b1b7d96e83ef134bb4215
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
[merez@codeaurora.org: fix merge conflicts]
Signed-off-by: Maya Erez <merez@codeaurora.org>
wil6210 11ad driver hook to platform specific
driver so that platform specific operations of msm
are properly executed.
Need to reorder init sequence to run wil_platform_init
before pci_enable_device. Assumption is platform init
may be required before device may be enabled, for example,
to turn on platform power for 11ad chip and run
PCIe enumeration.
platform uninit should be called after
pci_disable_device because platform uninit may render
pci device non-accessible.
Change-Id: Id36d20c2dcbf8704b1c4aec9e962117960c2eefe
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
[merez@codeaurora.org: fixed merge conflicts]
Signed-off-by: Maya Erez <merez@codeaurora.org>
New module (wil_platform) for handling platform specific tasks
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[merez@codeaurora.org: fixed merge conflicts and change to ARCH_QCOM]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Just temporarily disable aead alg related apis for 4.4 upgrade.
4.4 upstream cryto driver has a lot of changes on aead related APIS
and data structures, and hw crypto driver can not be compiled on 4.4.
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
This snapshot is taken as of msm-3.18 commit e70ad0cd
(Promotion of kernel.lnx.3.18-151201.)
Acked-by: Shabnam Aboughadareh <shabnama@qti.qualcomm.com>
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
This reverts commit 8125696991.
The commit"cfg80211/mac80211: disconnect on suspend" forces disconnection
on wlan interfaces if wake on wireless is not enabled from the user space.
Wake on Wireless is enabled by default in wlan driver (CLD) and cfg80211
layer never aware of wake on wirless enabled status done in wlan driver.
To avoid the disconnection while going to suspend and keep wlan driver
in WOW mode by default, the commit "cfg80211/mac80211: disconnect on
suspend" should be reverted.
CRs-Fixed: 540571
Change-Id: I483fe0530f9f00c338680416449215af326e3df1
Signed-off-by: Ganesh Kondabattini <ganeshk@codeaurora.org>
This reverts commit f04c22033c.
The commit "cfg80211: export interface stopping function" exports a new
cfg80211_stop_iface() function, intended for driver internal interface
combination management and channel switching. The new function is used
by commit "cfg80211/mac80211: disconnect on suspend" which is reverted
in order to avoid the disconnection while going to suspend. Hence the
commit "cfg80211: export interface stopping function" should be reverted.
CRs-Fixed: 540571
Signed-off-by: Ahmad Kholaif <akholaif@codeaurora.org>
AP stopped interface can be used to indicate that the AP mode has
stopped functioning, WLAN driver may have encountered errors that has
forced the driver to stop the AP mode.
When the driver is in P2P-Go mode, and when it goes thru automatic
recovery from firmware crashes, it uses this interface to notify the
userspace that the group has been deleted.
CRs-Fixed: 453060
Change-Id: Ifcd8d4f0c0b26f56a56fb8560aa474297b7521d4
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
When flag WIPHY_FLAG_DFS_OFFLOAD is defined, the driver would handle
all the DFS related operations. Therefore the kernel needs to ignore
the DFS state that it uses to block the userspace calls to the driver
through cfg80211 APIs. Also it should treat the userspace calls to
start radar detection as a no-op.
Change-Id: I9dd2076945581ca67e54dfc96dd3dbc526c6f0a2
CRs-Fixed: 630797
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
[neelanshm@codeaurora.org: Do not include the unrequired
change in util.c]
Signed-off-by: Neelansh Mittal <neelanshm@codeaurora.org>
This commit merges the following commits into one snapshot up to
msm-3.18 commit e70ad0cd5efdd9dc91a77dcdac31d6132e1315c1.
8e465d5 msm: wlan: Update tx power limits of country UA
296bec0 msm: wlan: Update regulatory database for some countries
c0fc361 msm: wlan: Fix the DFS region for Japan
6f1cca3 msm: wlan: Update the wifi regulatory database for TW
2c5867a msm: wlan: Modify JAPAN regulatory rules
e430543 regdb: Update database with 60GHz for Japan
ccce8fb msm: wlan: Correct the parsing of db.txt
acf74a2 cfg80211: add space after the b/w in db.txt
b2b5b4e msm: wlan: update the dfs_region to db.txt
36c64bd msm: wlan: Add country KP
da5d9cb msm: wlan: Update db.txt for regulatory support.
Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org>
