This will help reduce excessive logging in case of certain
error scenarios.
Change-Id: I466c05642988ab72edb77a16f9271678aeb44b74
Signed-off-by: Venu Yeshala <vyeshala@codeaurora.org>
Under ispif node set clock rate for camss vfe clock since
after xo shutdown this clock cannot be enabled without
setting rate first. Also, enable vfe clk src before
camss clock.
Change-Id: I3f80837abbb3f7d788db5b736cdb0d9816d7da14
Signed-off-by: Venu Yeshala <vyeshala@codeaurora.org>
On SDM630, there is a HW bug that could lead to chip damage if
the 3.1V rail (normally provided by PM660 LDO7B) is turned on
while the 1.8V (LDO10A) rail is off. A simple workaround is to
ensure that LDO10A is turned on prior to LDO7B. Achieve this by
making pm660_l10 the parent-supply of the pm6601_l7 regulator.
Change-Id: If04edf52dbbc7f0fccb6fcc86982935a62cc0e0c
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
In dual vfe usecase pd_stats buffer index is valid
for one vfe only, for other vfe it should be set as
invalid value (0xF)
Change-Id: Idf7e11fa89fe447dec578dfac2906d2ce8f610c2
Signed-off-by: Srikanth Uyyala <suyyala@codeaurora.org>
The pointer returned from alloc_pages passed unchecked to
ion_pages_sync_for_device.
This patch checks the return for NULL.
Change-Id: I407efc73a1e1297f382a7926cc79542bde88d06d
Fixes: 2d4fdc7bde ("ion: Fix DMA operations for ARM64")
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
There is a chance that usb_qdss_close() and disconnect race each other and
it might result in NULL pointer dereference in set_qdss_data_connection()
called from usb_qdss_close(). Fix the issue by passing qdss as argument
to set_qdss_data_connection() instead of ep.
Also remove restart call, which simulates spoof disconnect and connect,
when qdss channel is being closed, which is not required anymore as
DBM endpoints can be claimed without full USB block reset now.
Change-Id: I00642402dbe2e9595d3b3ce760ba4ed2deb2899f
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Update property value ranges, in compliance with qnovo design spec.
Also, allow the user to set the parameters values in different number
base. While at it, fix the file permission values for all the
parameters to octal representation.
Change-Id: I0d0f14c22457322c7d79b95107e3cbfcd4a8a0b6
Signed-off-by: Harry Yang <harryy@codeaurora.org>
rmnet_data assigns device name by the order they are created.
This causes problems which multiple processes are trying to
create devices and leads to random device names.
Assign device name as specified by user.
CRs-Fixed: 2018785
Change-Id: Iab8e053c6ccacbeedaa7763e760d0c12e756b5d0
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Amongst its other duties, msm_gem_new_impl adds the newly created
GEM object to the shared inactive list which may also be actively
modifiying the list during submission. All the paths to modify
the list are protected by the mutex except for the one through
msm_gem_import which can end up causing list corruption.
Change-Id: Ic0dedbad6b68d4d3db726e0d598d4d21af4b328c
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
The KASLR code incorrectly expects the contents of x18 to be preserved
across a call into C code, and uses it to stash the contents of SCTLR_EL1
before enabling the MMU. If the MMU needs to be disabled again to create
the randomized kernel mapping, x18 is written back to SCTLR_EL1, which is
likely to crash the system if x18 has been clobbered by kasan_early_init()
or kaslr_early_init(). So use x22 instead, which is not in use so far in
head.S
Change-Id: I6a79b0c3b2e2306d080406c7f617483f6f1519b0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Git-commit: d5e5743797adc26e09db262e7a4b6b81d8c0f45c
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[neeraju@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
If kernel image extends across alignment boundary, existing
code increases the KASLR offset by size of kernel image. The
offset is masked after resizing. There are cases, where after
masking, we may still have kernel image extending across
boundary. This eventually results in only 2MB block getting
mapped while creating the page tables. This results in data aborts
while accessing unmapped regions during second relocation (with
kaslr offset) in __primary_switch. To fix this problem, round up the
kernel image size, by swapper block size, before adding it for
correction.
For example consider below case, where kernel image still crosses
1GB alignment boundary, after masking the offset, which is fixed
by rounding up kernel image size.
SWAPPER_TABLE_SHIFT = 30
Swapper using section maps with section size 2MB.
CONFIG_PGTABLE_LEVELS = 3
VA_BITS = 39
_text : 0xffffff8008080000
_end : 0xffffff800aa1b000
offset : 0x1f35600000
mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1)
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
offset after existing correction (before mask) = 0x1f37f9b000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
offset (after mask) = 0x1f37e00000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
new offset w/ rounding up = 0x1f38000000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
Change-Id: I6de9019cffe5e730a505fba1fd1168bb13fb10af
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Terminate the interrupts triggered before the intitalisation
itself.
Change-Id: I7c005134ecbdae38b58e4312f9e294f5b59c2510
Signed-off-by: Dilip Kota <dkota@codeaurora.org>
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Add speed-bin 2 to support the fmax of 1.9GHz and 1.5GHz
for perf and power clusters respectively.
Also add speed-bin 2 to support the fmax of 560MHz for GPU clock.
Change-Id: I9bc547b0f8a2f2c7cad04ec8c967ed580755ae75
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Add syscore_ops support for gpio-keys driver to service
wakeable irq handler before the CPUs resume after
suspend state.
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Change-Id: I7fe266661abfd469c68309a66aed0cb0fa2de33e
When CONFIG_USB_F_QCRNDIS is enabled to support RNDIS over BAM2BAM
to IPA, it needs to compile rndis.c driver as well. Otherwise
will see compilation error. Hence compile rndis.c along with f_qc_rndis.c
when CONFIG_USB_F_QCRNDIS is enabled. Disable CONFIG_USB_F_GSI as both
configs can't be enabled at a time as that would cause compilation errors
and warnings seen due to same misc device name registration.
Change-Id: Ie11fba25be53e158811b05c7054bbdf126689c36
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
In MSM soundwire codec, avoid initial bootup SSR
notifications after registration of notifier.
Change-Id: I06b1ffedf3b7247baa1d3ffe92a66584a321e624
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add mixer control to allow set WSA speaker PGA mute
when required for any usecase.
Change-Id: Ic02a5973ec25b4c5b613b42129fdab9c0d7a2133
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
After boot, insert headphone and play 44.1 clip fails to play
first time sometimes. Since at bootup MCLK is acquired at
9.6MHz and not reset. And for 44.1MHz, request for 11.2896MHz
is done causes overwrite of frequency request at DSP which is not
allowed and causes playback to fail. At bootup regacache call for
digital codec result in additional vote for MCLK if int_mclk0_enabled
flag is false. Change the order in device_down call from analog codec
and also avoid notifier call for SUBSYS_DOWN at bootup.
Change-Id: Ifc0540826d38c5adf8b068ea87d5a5f71a4ac674
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In SDM660 WSA speaker using MSM over soundwire version,
observe high cold start latency. As interrupt is disabled,
broadcast ack is not received which results in 200ms higher
latency. Reduce latency impact by blocking only for 10ms
for MSM over soundwire version.
Change-Id: Ic0e659d7c443c1462aba4da2f8bf9471031d02d2
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Enable digital clock bits before digital codec reset.
Also update HD2 settings as per latest HW sequences.
CRs-Fixed: 2018603
Change-Id: I270a324ffebc8b84ef23ff6b209efcde724f9b37
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
With the recent changes in upstream, certain parameters
are updated in the core random number generator driver.
So update HW rng driver to provide the quality estimation
of true entropy in RNG's bitstream. Value 700 corresponds
to 70% an arbitrary value, which is taken from 3.10.
Change-Id: I0d27e44a05473bcbc84af82c79565f87329b9ae7
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
Observe random mute on speaker during device switch on
secondary images. Avoid reading previous register
read when SWR slave read and overwrite of previous register
when SWR slave write, by adjusting delays in respective APIs.
Change-Id: I302968ad8e774598c8414e05ba669f90bf39b82c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Observe compander for one speaker is not working.
Update offset in config compander API to set compander registers
as expected.
CRs-Fixed: 2019754
Change-Id: Ib75e01016e6a9fd39a953da40f36babc3beaec13
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Without re-init timeout completion of btn_press object
waiting in correct_plug_swch work, if mbhc_deinit and mbhc_start
happens again, it results in crash. In mbhc_deinit,
cancel correct_plug_swch work to handle this.
CRs-Fixed: 2018976
Change-Id: Ic26edea18f5a8554f4dff3bf6ad49ec039493a64
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Register offset for LPI_GPIO_16/17 should be 0x5040/0x5050.
Correct the offset to make sure LPI_GPIO_16/17 work.
CRs-Fixed: 2019608
Change-Id: Iac0bc2b434b23094c297e69eabea4d72bfd1eb8b
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Pinctrl info is set to ap mclk for all the client. Remove
the wrong assignment.
Change-Id: I95fb16367157fa0cb47a1a25290eadb4472abb51
CRs-Fixed: 2015665
Signed-off-by: Meng Wang <mwang@codeaurora.org>
LPI GPIO 18 is used as a clock for native playback for wcd9335
on SDM660. Correct it as lpass mclk, not ap clk.
CRs-Fixed: 2015665
Change-Id: I1fa5f2dc314a73d139aacbb9689e9a161b9a54ef
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Currently, the buffers used for transfers are allocated each time
the transfer is requested. This causes memory allocation failure
for higher order allocations possibly due to fragmentation or no
higher order blocks being available. Fix this by allocating the
buffers during the component bind and re-use the buffers across
transfers.
CRs-fixed: 2014478
Change-Id: I48212678e39d089fbb903d195faf45436f358f4b
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Restart mechanical detection as part of SSR device_up
functionality to receive headset events after SSR.
CRs-Fixed: 2015351
Change-Id: I359c701b8c7c086c087ab5fa7714b6bd3f7c4708
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add the pinctrl clock for ln_bb_clk to the GCC driver
for MSM8996.
CRs-Fixed: 1063062
Change-Id: If85a0dbb26e350588cbd6614c032bf208a205be2
Signed-off-by: Devesh Jhunjhunwala <deveshj@codeaurora.org>
Add support for additional frequencies for the qspi_ser_clk_src
on msm8996.
Change-Id: I4efa0ad4dc3f68a0c54bd4cf7ee77b4c78be4be1
CRs-Fixed: 994014
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
In some of the cases when UART submits sps transfer request, BAM finishes
transfer quickly. This results into deletion of Tx timeout timer from an
ISR context whereas in actual timer is not yet started. In such cases
del_timer and mod_timer are meeting to a race where mod_timer finds a
NULL handle due to deletion by del_timer.
Change the timer call sequence to submit the timer first and then do a
BAM transfer.
Change-Id: I1d75a43d928776eb24752fd97d0ef31e0d5b6a51
Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
On SDM660, there is a HW bug that could lead to chip damage if
the 3.1V rail (normally provided by PM660 LDO7B) is turned on
while the 1.8V (LDO10A) rail is off. A simple workaround is to
ensure that LDO10A is turned on prior to LDO7B. Achieve this by
making pm660_l10 the parent-supply of the pm6601_l7 regulator.
Change-Id: I748d2b8526066e746002ad007789c10422c12c68
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Initialize external backlight level to -1 when fb probe.
This is to make sure the external backlight level is
invalid the first time overlay kickoff.
CRs-Fixed: 2021142
Change-Id: I973b184903cdb5b378326b23ca5c958e4b868c76
Signed-off-by: Xu Yang <yangxu@codeaurora.org>
Unknown WMI events are being printed with log level warning.
Change the log level for the unknown wmi event print to debug.
CRs-Fixed: 2019156
Change-Id: Ice39487c698462d6c845dab2ede93f5c856364c0
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
