Add new GPU ID: A508 and corresponding VBIF and initial
settings on SDM630.
Change-Id: If1cd782beb50098a69a9d05acb083ef4b0465766
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Display port pixel clock source is required to propagate the set rate to
parent, so update the flags for the same. The lowsvs frequency has got
updated to 154MHz, update the same.
Change-Id: I67a5ff3b5fb18c2ce986c5f431f4e41a78fe13a5
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The display port PLL generates only limited set of frequency combinations.
As fractional dividers are not required to be used, update the RCG ops to
take care of the same.
Change-Id: I601273fee044ef128dbc7c2e23bc2d8ce10e31dc
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add a property to the PD PHY peripheral to specify the default
sink capabilities for USB PD as 5V @ 3A, 9V @ 3A and 12V @ 2.25A.
These are common values that should be supported on most boards,
but can be overridden as necessary.
Change-Id: I5ea95d2f0532c59f7d83cb608d939ad28a8bb28e
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add a device tree property to allow specifying the supported
set of sink capabilities. If not specified, fall back to a
single capability of 5V @ 3A.
Change-Id: I394061d9f3070099e35b651ce4b63a7993343bf1
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Update sensor id flag for sdm630 such that thermal
client can obtain the HW ID for the available
temperature sensors (TSENS) with sensor ID details.
Change-Id: I70a1c7e4a420dc41591f021da499efe10b7fd6ae
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
in kgsl_pwrscale_init(), add missing NULL check for kgsl_midframe
to avoid further accessing, in case if memory is not available.
Change-Id: If6a4e59d4675fe67aefc63d7f8251f4d28ddeec5
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Enable NAP state for A512 GPU to save power.
Change-Id: I3c643c90d39ab33c11146b5864b20c14bc9a339a
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Enable retention of memory and periphery logics for
GPU core clock. If the setting is not done then GPU
might get stale data while switching from NAP to
ACTIVE and which leads to page faults or hangs.
Clock settings need to be handled by client drivers only
and hence do it in KGSL driver.
Change-Id: Iea3fd720e2a0eda9f6ee719177a8898bc2bd75e4
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
On sdm660, VDDIO needs 1.8V and LDO11 is voted for 1.88V
which is causing higher power numbers. Update the vote
correctly for LDO11.
Change-Id: Id6178d312394a4c4bebb77659f6eb7e21574137b
Signed-off-by: Ashish Garg <ashigarg@codeaurora.org>
