Enable retention of memory and periphery logics for
GPU core clock. If the setting is not done then GPU
might get stale data while switching from NAP to
ACTIVE and which leads to page faults or hangs.
Clock settings need to be handled by client drivers only
and hence do it in KGSL driver.
Change-Id: Iea3fd720e2a0eda9f6ee719177a8898bc2bd75e4
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Do not close MHI channels when usb is disconnected and a process
is running in memory device mode.
Change-Id: I043fc25542e432a9fa294d4f433945718b2e5878
Signed-off-by: Sreelakshmi Gownipalli <sgownipa@codeaurora.org>
During ramdump collection we assign memory to HLOS from subsystem for
non-secure pil. Whether ramdump collection is successful or not, we
should assign memory back to subsystem. This is to avoid access
violations in powerup path which happens after ramdump.
CRs-Fixed: 2002073
Change-Id: I7f1d42aebb44464fe077ca544ce91c2d7a8eefbb
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
Add error message for GFP_ATOMIC allocation failure. Keep current
design to drop packet if allocation fails. This print will help debug
issues where a system critical client fails because of a dropped GLINK
packet.
CRs-Fixed: 1112151
Change-Id: I6a69cbf1f88295009284d726a06fa5affd4cc591
Signed-off-by: Chris Lew <clew@codeaurora.org>
firmware-5.bin file for WCN3990 contains just WMI and HTT versions and
firmware is loaded by PIL.
This change, populate the hw params for WCN3990 and parse
firmware-5.bin file for WMI and HTT versions.
CRs-Fixed: 2002151
Change-Id: Ic65d3696e9546fd428e608f4738e9fe53d61338f
Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
Values stored in etm are lost across power collapse.
Add etm save retore nodes which saves etm
values across power collapse.
Change-Id: I9ceb89a255847ca1d9dc01f223283f5664cb8feb
CRs-fixed: 1112224
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
IPA and GSI firmwares are saved on the file-system as an
ELF file. IPA driver extracts the firmwares and load
them during driver initialization.
This change adds validation steps to each firmware before
loading: load addresses, memory sizes, firmware sizes and
more...
Change-Id: I7d7f66e8e8a9ca0efae08b1e57b25ae4e44cc5bb
CRs-fixed: 1110522
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
BLSP2 UART1 is used as transport for Bluetooth between sdm630 & wcn3990.
Enable it so that Bluetooth can be enabled on sdm630 CDP/MTP/QRD.
Change-Id: I61f300d5a8fa54172acce429ee961f7caef7d404
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
Add sdhc ice device tree data to dts files with all
the necessary parameters, to enable the ICE driver
for crypto operations related to disk encryption.
Change-Id: I5bfcf35f4a93ef9ef21508d3c4b3309bb0086511
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
Add ufs ice device tree data to dts files with all
the necessary parameters, to enable the ICE driver
for crypto operations related to disk encryption.
Change-Id: I87463a1c1a064ba2a0597d095e6807931e7b5666
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
Modify DCC RAM size for sdm660. DCC RAM is used to
store captured information locally in DCC.
Change-Id: Ib9d4ae640e8162d5a3f44739b9289457ee4ae43c
CRs-fixed: 2002031
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
Temperature compensation is needed for charger die
temperature. Offset and slope coefficients are applied
based on the FAB ID read from the REVID peripheral.
Change-Id: I0bd5712b17b11c245da6d737ea0994e7f17d9837
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Add ufs and ufs-phy device nodes to support
ufs as storage device for SDM630 platform.
Change-Id: Ia4059d1663dc7886ac3873bbdcca6023c6ff5643
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
