Gamut mapping feature has a huge size 3D LUT table, which consumes
a lot of time to program. This patch optimizes the programming of
the 3D LUT to reduce about half of the register writes.
Change-Id: I4a9fcee6c1cd70d9c04426c394e480c11a6f4648
Signed-off-by: Ping Li <pingli@codeaurora.org>
scm_call2 is printing the input arguments if TZ ret value is < 0
leading to information leak. Remove printing input arguments.
Change-Id: I21dd6d83fa979aed2c79ebb2c9c8de63a247dded
CRs-Fixed: 1076407
Signed-off-by: Swetha Chikkaboraiah <schikk@codeaurora.org>
Signed-off-by: Paresh Purabhiya <ppurab@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
In existing HDMI PLL driver the VCO frequency value is truncated
so following PLL calculation could be impacted. Use 64 bit value
instead to maintain the necessary precision.
CRs-Fixed: 1086894
Change-Id: Iec3f65942dd152b0b7aa32af1a90039fff06cb34
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Clock recovery and dynamic resolution change require changing
HDMI clock rate while HDMI PLL is on. There are two paths while
clock is changed, one is atomic update which doesn't require
PLL tear down, the other is when clock rate change is too big
and a full PLL tear down is needed.
CRs-Fixed: 1086894
Change-Id: Ia202e0aee09f506a7bbe4e13702f30dee119ce8e
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Addition of Ngid breaks some third party applications, which
are dependent on a particular order of fields. This change
moves the field to the end, to fix this issue.
Change-Id: Ifdc781aca49dcb535d5fa5005b85dc87604560dc
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Commit 18cd808986ba101d ("usb: dwc3-msm: Make power collapse
and power-on-reset mandatory") removed the device tree properties
for power-collapse due to which the dwc3_restart_usb_work() which
was supposed to do a full POR sequence by simulating a cable
disconnection-reconnection sequence now only does a dbm reset.
Fix this, so that dwc3_restart_usb_work(), does a full POR.
CRs-Fixed: 975249
Change-Id: Iaabe9283ec80954a2e504a55f2b4cdf93ca8ae46
Signed-off-by: Azhar Shaikh <azhars@codeaurora.org>
If the qos value is increased only for a subset of cpu's
aggregated qos for those cpu's is still the previous value.
This is because the qos request list is maintained per
request and not per cpu. In this case as there is no change
in aggregated qos value, these cpu's are not wokenup to
take the new qos value into effect.
So wakeup cpu's even if the aggregated qos value does not change
but the cpumask changes.
Change-Id: If5a4a100108e85e04beb77e5249bd6c452672edf
Signed-off-by: Anil Kumar Mamidala <amami@codeaurora.org>
Add required changes for LDOs for msm8998-interposer-msmfalcon
for USB functionality to be working.
Change-Id: I121651a49ef27ba02f1960ed5c95baf93b00d1f5
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Add required USBPD PHY device node for msmfalcon for USB PD
functionality to be working.
Change-Id: I8cd2981f176e08c1ea4f8a9b7ff42887b590d941
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Core-ctl module by default, manages cpus instead of msm_performance
module. Set this config to allow msm_performance manage(hot-plug) cores
in the absence of core-ctl.
Change-Id: I02a1007edfc63ad2c2dd99616cb1a64432b08d13
Signed-off-by: Dilip Gudlur <dgudlur@codeaurora.org>
