As RUMI platform does not require real clocks, add back dummy clocks for
this platform.
Change-Id: I774ffb1e55971ec8097994d1cfe664db5902a8ce
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Change GPU clock plan based on requirements for msmcobalt
interposer platform versions.
Change-Id: I817859817eeb76c565d1604fcb1cc11b0df2dd30
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
This reverts commit c93b93ee87 ("ARM: dts: msm: disable L1 and
L1ss for PCIe on msmcobalt").
Re-enable a necessary power saving feature for PCIe and its
client.
Change-Id: I231f518b701a988ab4a4f475e7e3c6f17d58187b
Signed-off-by: Tony Truong <truong@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Currently multiple regulator devices can be specified for LED
switch device though a switch device may just require one supply.
Also, before the switch device is enabled, voltage request is
sent to set the maximum voltage. This is not needed with the
regulators like BoB being used as supply for the switch device.
Just enabling the regulator is enough during switch operation.
Modify the way the regulator is obtained and controlled for
switch operation.
Since BoB regulator is configured by the bootloader properly
for flash operation, remove them from the supply list of LED
switch devices on pmicobalt and pm2falcon.
While at it, fix the way device tree properties are read from
flash/torch, switch devices.
CRs-Fixed: 1083246
Change-Id: I8eb5f305f89bc18ad4b735bd89cbf259f0e1ea11
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add Audio and QCA slimbus instance entries.
Entries are disabled by default. Need to enable
along with slave instances.
Change-Id: I372e9e38a567e0cf83a226f29510fdf570decd43
Signed-off-by: Dilip Kota <dkota@codeaurora.org>
The new diag client requires additional memory from hlos.
This patch caters to diag memory requirement.
CRs-Fixed: 1079523
Change-Id: Ief14bb96bfdc1998b7b9423755daae8d93964672
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
WLED module in pmicobalt has different VREF_CONTROL settings with current
WLED module which is existing in pmi8994/pmi8952, including min voltage,
max voltage, step size and default voltage. Add support for it.
CRs-Fixed: 1081738
Change-Id: Ibaa555cec8cfd296125af3e6277df5331f5c438b
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
There is a current leakage on S5 and LDO XO RF rail during
BT sleep. To prevent the current leakage, L7A/L17A/L25A
should be on during BT sleep. So, change L7A/L17A/L25A LDOs
from pin control version to SW control not to follow HW_EN2.
RFCLK2 has not been turned off during sleep and caused
extra current penalty. For RFCLK2 to follow HW_EN2 pin control,
clk_rf_clk2_pin should be used.
Change-Id: Ie316941535f62afd75eac21280061b489e9196c1
Signed-off-by: Sungjun Park <sjpark@codeaurora.org>
The physical dimensions are used to determine the DPI in the
framework. If these dimensions are not provided, the framework
assumes a default DPI value which may not be suitable for the
current panel and lead to some apps drawing incorrectly.
Change-Id: Ib14c5b9121190dded5071ff60ecf0be8e5e5c232
CRs-Fixed: 1079438
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Fix the wlan host driver compilation error for the msmcobalt and msmfalcon
32 bit target. Enable QCOM_IRQ_HELPER config flag to expose IRQ balancer
APIs for msmcobalt and msmfalcon 32bit target.
CRs-Fixed: 1088388
Change-Id: Ieb72bd3779c3b9a372b469f3f7f571fc22294099
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
start and end must be page aligned while calling
flush_tlb_kernel_range else the last page may get
missed while invalidation.
Change-Id: Ibaab202c47a475623e197a13191b2fed638ce20b
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
Add battery profile for QRD interposer msmcobalt to
make sure FG could load it and work as expected.
CRs-Fixed: 1086571
Change-Id: I6ca20cbd29b9a7bd45a78321ea0f65b74450e8c1
Signed-off-by: cyizhao <cyizhao@codeaurora.org>
Correct the camera dtis place to support multiple chipset
version for msmcobalt skuk device.
Change-Id: I20e12bc1597ad15cb3dc9c3ef18d81d039931e07
Signed-off-by: Wei Ding <weiding@codeaurora.org>
Modify the clock_gcc dummy clock to use the real clock controller for all
global clock controller clients.
Change-Id: Iac989d3c9312654b599d8299206e5478ca454861
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add IMEM PIL entry to save relocatable address of images
loaded by PIL.
Change-Id: Ie09c8ae431cc7da4c8cd745d9c6d018e6a256158
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Add IMEM PIL entry to save relocatable address of images
loaded by PIL.
Change-Id: I79acd047c7e414ed19a2f992f8ff801b63c8a2ad
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
As per the hardware documentation, PFM needs to be disabled for
LAB regulator during slow start. When the display is turned off,
PFM needs to be disabled with the default current limit. When the
display is turned on, after VREG_OK interrupt fires, PFM needs to
be enabled after overriding the current limit. Add support for
it. Currently this is required only for pmicobalt.
While at it, fix the current limit configuration for LAB
regulator.
CRs-Fixed: 1024407
Change-Id: Icb3781ca31dd8474cfca077c52593dc69d011127
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Set LAB's precharge time to max 500us to optimize the precharge
behavior as suggested in the hardware documentation.
CRs-Fixed: 1084297
Change-Id: I118f4254686caf498087847916b7710662ab31e7
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, some properties in LABIBB regulator driver are having
prefix "qpnp" which is not reflecting the vendor. Change it to
"qcom" to reflect the vendor name correctly and also match with
other DT properties.
CRs-Fixed: 1071971
Change-Id: I182dddc29f3d7c7b449b56ac7fb84e74061cf3a4
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add initial set of configuration for GPU mempools
to reserve page pools at init time of kgsl driver.
CRs-Fixed: 1064046
Change-Id: Ie6789e13be7316a0de43538b9e477920fa64c6bb
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Modify the code-dev mapping table for memlat to
further improve power and performance on msmcobalt v2.
Change-Id: Ida2c99d7fd56b5b277653c42808f08f4f23ed790
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Convert most of the pmfalcon stub-regulator devices to a
rpm-smd-regulator devices. This ensures that requests made for
these regulators are aggregated by the RPM processor along with
the requests from other processors.
Also, add a dummy gfx_vreg_corner regulator until the CPR node
is added.
While at it, rename all regulators names and add pm/pm2 prefix
to differentiate between regulators on multiple supported PMICs.
Also update all clients with new regulator phandles.
CRs-Fixed: 1077493
Change-Id: I95b17de5bf17b62096d2c9d60633b6b30768752a
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Update the MISC settings register according the color
depth and format. Update the MVID and NVID registers
using the M and N values used to configuring
the DP pixel clock.
Change-Id: I67e08d3491fbb7c0960c463cc8f979238b89d818
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
A540v1 and v2 both need to enable the LMLOADKILL quirk for the
GPU.
CRs-Fixed: 1036444
Change-Id: I84243578a1ef2f9948f0c9a8c1c00dc6a31eb579
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
