In host mode upon XO shutdown high speed and full speed device
connection is not getting detected because mpm is not configured
to monitor for Dp line state change.
Change-Id: I34e3f586b99b6ff1af1d2323d4f272ee3cca7fa2
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
This is an ancient bug that was actually attempted to be fixed once
(badly) by me eleven years ago in commit 4ceb5db975 ("Fix
get_user_pages() race for write access") but that was then undone due to
problems on s390 by commit f33ea7f404 ("fix get_user_pages bug").
In the meantime, the s390 situation has long been fixed, and we can now
fix it by checking the pte_dirty() bit properly (and do it better). The
s390 dirty bit was implemented in abf09bed3c ("s390/mm: implement
software dirty bits") which made it into v3.9. Earlier kernels will
have to look at the page state itself.
Also, the VM has become more scalable, and what used a purely
theoretical race back then has become easier to trigger.
To fix it, we introduce a new internal FOLL_COW flag to mark the "yes,
we already did a COW" rather than play racy games with FOLL_WRITE that
is very fundamental, and then use the pte dirty flag to validate that
the FOLL_COW flag is still valid.
Change-Id: I42e448ecacad4781b460c4c989026307169ba1b5
Reported-and-tested-by: Phil "not Paul" Oester <kernel@linuxace.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Git-repo: https://chromium.googlesource.com/chromiumos/third_party/kernel.git
Git-commit: 19be0eaffa3ac7d8eb6784ad9bdbc7d67ed8e619
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
Return IRQ_HANDLED only if the irq is really handled, this will
help in catching spurious interrupts that go unhandled.
Change-Id: Icc2a373f3f4599887c4f86632107ed11e0525153
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Add missing path for codec interpolator 0 (INT0)
in wcd934x audio routing. This will cause playback
mute through INT0 mixing path. Change info logs to
dbg at instances of default value assignment.
CRs-fixed: 1099759
Change-Id: I3332d7e3bd0b310b486d273b7f9884410509ce25
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Disable VDD_APC0 and VDD_APC1 CPR aging measurement and
adjustments for all local CPR fusing revisions. It is unknown
which future revision will have the initial aging sensor
difference fuse blown. Software must not attempt to perform an
aging measurement unless this fuse is blown. Therefore, disable
aging measurements on all future revisions.
Modify the open-loop and closed-loop voltage adjustments
accordingly so that the maximum 15 mV aging margin is present
for all CPR revisions.
Change-Id: I4546a7994fc0442bf82d36ca0a404a57be8c7dd3
CRs-Fixed: 1097587
Signed-off-by: David Collins <collinsd@codeaurora.org>
Currently GEN3 FG driver reads "qcom,nom-batt-capacity-mah"
property from the battery profile device node to use that for
notifying fastcharge current to the charger driver. Change that
to use "qcom,fastchg-current-ma" property which seems to be more
appropriate. Update all the battery profiles that are used with
GEN3 FG to follow that.
Change-Id: I119e6af297b37a06a227475f712f938367fb65bc
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
To match with other battery profiles used for GEN3 fuel gauge,
rename the battery profile used for msm8998 QRD platform.
Change-Id: I9a12ac11b6bd303eb32b4e03e116281bca664d06
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
As multiple requests are submitted to the ufs host controller in
parallel there could be instances where the command completion
interrupt arrives later for a request that is already processed
earlier as the corresponding doorbell was cleared when handling
the previous interrupt. Read the interrupt status in a loop after
processing the received interrupt to catch such interrupts and
handle it.
Change-Id: I91c1ba3360592f258a2c3c4e902394c3ddc77bca
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
migrate_tasks() migrates all tasks of a CPU by using pick_next_task().
This works in the hotplug case as we force migrate every single task
allowing pick_next_task() to return a new task on every loop iteration.
In the case of isolation, however, task migration is not guaranteed
which causes pick_next_task() to keep returning the same task over and
over again until we terminate the loop without having migrated all the
tasks that were supposed to migrated.
Fix the above problem by temporarily dequeuing tasks that are pinned
and marking them with TASK_ON_RQ_MIGRATING. This not only allows
pick_next_task() to properly walk the runqueue but also prevents any
migrations or changes in affinity for the dequeued tasks. Once we are
done with migrating all possible tasks, we re-enqueue all the dequeued
tasks.
While at it, ensure consistent ordering between task de-activation and
setting the TASK_ON_RQ_MIGRATING flag across all scheduling classes.
Change-Id: Id06151a8e34edab49ac76b4bffd50c132f0b792f
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
Disable WLED current staggering in pmi8998 and pm2falcon to fix
audible WLED issue of sound generation when WLED is turned on in
hybrid mode.
CRs-Fixed: 1099709
Change-Id: Id0d3385cf3f29379e2df4f2c1657c4b661548721
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
There is a race condition between clearing an HMP request for active
migration and the actual active migration. Active migration can he
half-way through doing the migration when the HMP request can be cleared
by another core. Move clearing of HMP request to the stopper thread to
avoid this.
Change-Id: I6d73b8f246ae3754ab60984af198333fd284ae16
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
We don't want user space tasks to run on isolated cpus. If the affinity
mask that the user space task is trying to set only includes online
cpus that are isolated return error.
Also ensure that tasks do not get stuck on isolated cores. We are not
properly updating the mask that we check against the current CPU so we
might end up thinking we can run on the current CPU. Fix this.
Change-Id: I078d01e63860d1fc60fc96eb0c739c0f680ae983
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
In certain PMICs, when WLED is configured for AMOLED panels, AVDD
default voltage configured for SWIRE mode has to be reconfigured
every time WLED module is disabled and enabled. Otherwise, AVDD
voltage can stay at the previous voltage level configured through
SWIRE pulses. Add support for it.
CRs-Fixed: 1071936
Change-Id: I938ce65f42eebe31be27151281d7e8502ba29f6e
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
There is null pointer access occurring when video session
opening failed and power collapse thread sending sys_error
to all opened sessions in parallel. Fix the issue by doing
v4l2_fh_exit() afer removing new session from core->instances
list.
CRs-Fixed: 1088562
Change-Id: I2523a46487a03ade40afeddd394a4572283d91a2
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Make sure the USB3/DP PHY mode selection is switched back to
USB3 mode before proceeding with PHY initialization. This fixes
a bug when DisplayPort previously uses the PHY and does not
switch it back which causes the POWER_DOWN_CONTROL register write
to not take effect and results in USB3 PHY initialization failure.
Change-Id: Idad0f80eda6192ccae9e824f1f76c7071806ffec
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Extend the media format options passed to the voice driver to
include sample rate, bits per sample, and channel mapping in
addition to port ID and the number of channels. Additional media type
information is provide to help avoid additional buffers required in
case of non-fractional sample rate for post processing voice data.
CRs-Fixed: 1065881
Change-Id: Ib69b57dc677b87fecfd689df7f8fc7ec8b4bc59f
Signed-off-by: Siena Richard <sienar@codeaurora.org>
For targets with LMH DCVSh hardware and OSM, BCL software frequency
mitigation is not required. Since hardware is doing the frequency
mitigation, there is no need for the HLOS BCL frequency mitigation.
So make the properties "qcom,mitigation-freq-khz" and
"qcom,thermal-handle" as optional properties.
Change-Id: I0062f3b39f00ff2f0e74affcffbcf1afd89d3b2f
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Record cycle count and kernel time in ns while entering suspend
and while resuming. This will help in matching up the kernel time
with external subsystems and in recording suspend time in cycles.
Change-Id: If22d9880103c7d54087d0faf4c992259e6b97f08
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Enable flash nodes for front and rear camera.
Change-Id: I4e14ef9177dcf06c6cab5fb5b32d817fbbaa8478
Signed-off-by: Shankar Ravi <rshankar@codeaurora.org>
When the eSE is powered off, the “system” needs to give
8ms to the capacitor connected on the SVDD line to discharge.
We should inform the FW we just powered off the eSE.
Change-Id: I864fd8f75ded6ab8c42ea36bcdadcdbe924e927d
Signed-off-by: Gaurav Singhal <gsinghal@codeaurora.org>
Introduce clk_debug_mux which would support clocks to be allowed to measure
clock frequency from debugfs.
Change-Id: I81c32a876b33f5a7773485a76897ff9cbed45a76
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Remove WLAN hardware reset sequence from ICNSS platform as it
will be taken care by WLAN FW.
CRs-Fixed: 1089686
Change-Id: I363ee028eeb360ef998fd90c1ff94bb09c4ac8b4
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
The diag dload memory region is part of IMEM. USB Diag driver
queries this device node for the memory address to access and update
USB PID and serial number. Hence add qcom,msm-imem-diag-dload node
on msmfalcon and msmtriton.
Change-Id: Ib283941037469833786b793c1e31e69e1c95d45d
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
This prevents leakage on 1p8 power rail upon boot up when usb cable
is not connect.
Change-Id: I28a4f495293863361843eb30b2d20f1f57889f95
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Proxy vote for gcc_boot_rom_ahb_clk for modem pil on msm8998 instead
of keeping the vote until the modem was shutdown.
Change-Id: Ib32d40351179a687eca38228c4503e4a9a88c28d
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
When an atomic iommu domain attaches, an additional vote for both
clk_prepare, bus_bw, and regulator_enable must be held. The prior logic
only did this if the atomic domain was the first to attach to the iommu.
Fix this.
As a side effect, add reference counting for bus_bandwidth voting such
that a call to arm_smmu_enable_clock() followed by
arm_smmu_disable_clocks() will not always result in a bus bandwidth
vote of zero.
Change-Id: I7f88ea845a281c8c1def4f642e61262b53b60e1a
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
L2a is required to lock the phy PLL upon bus resume when
exiting from XO shutdown. This LDO powers REFGEN block
which is required to be powered on so that phy PLL gets
locked as part of wakeup from XO shutdown.
Change-Id: Ia0e3d574de7c78534832e4f8749672eb6fcde1f0
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
For the devices supporting implicit feedback over data endpoint
usb audio driver instantiates snd_usb_endpoint as sync_endpoint
even though there is no real usb sync endpoint exists. QMI driver
looks for usb endpoint if sync_endpoint is instantiated and bails
out if endpoint related context does not exist. This causes such
devices to not work. Hence do not bail out if sync ep context
does not exist and continue preparing the QMI response.
Change-Id: I7d96555573cfd6cca1ca56c877d78fde943f8100
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
This fixes the issue where the dp pll resource was not correctly
keeping a refcount on the pll resource. This will fix the bootup
warning when both DSI and DP are enabled.
Crs-Fixed: 1088737
Change-Id: I19f8eef7f664a58cac1a082b8195e48c52613c5d
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
The hardware version register does not return the expected
version value. The register is located in register space that is
accessible to the secure world only. This results in WDOG status
register not being enabled. Use the chip version instead.
CRs-Fixed: 1099112
Change-Id: I014c823bcf2545f005205dde326a074eaa5d7a6a
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
For iommus which do not use stage1 translation, stage2 may not be aware
of the device's dma_mask requirements. Choose the dma_ops such that
allocations are made within the dma_mask region and bounce buffers are
used as necessary.
Change-Id: I63ae3ff9e5ab608892d12db7a813264d234699ee
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
1. Update PMIC gpio configuration for
front and rear camera.
2. Correct VANA GPIO.
3. Correct the CSID VREG Voting.
Change-Id: I1e72bf8855ea1150eb2cedaee82d04610b09bdae
Signed-off-by: Shankar Ravi <rshankar@codeaurora.org>
Enable required audiosource driver that is required for audio
over accessory dock to work.
Change-Id: Ifeb779a3323c505d482eb53ad96a1b8aec0f3af5
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
As audio-ext-clk.h is finally included in device tree and
and using ifdef results in compilation failure. Delete
ifdef from audio-ext-clk.h.
CRs-Fixed: 1090500
Change-Id: Ib6f715c3f606770e7e0b1f0f84ab50e442398cd0
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Add support of PMFALCON PMIC in FG driver. PMFALCON
FG core uses same SRAM map as PMI8998v2.0.
While at it, add workaround flag variable to keep track
of all hardware specific workarounds.
CRs-Fixed: 1096793
Change-Id: I8ba73276fd30f6eaf935ed77b75601f1322c0ba6
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Add support for diag communication between APPS and CDSP.
Change-Id: I43cffa370f1bee51fb252530c6ae9173bb21110a
Signed-off-by: Sreelakshmi Gownipalli <sgownipa@codeaurora.org>
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
If software becomes unresponsive then the battery could be overcharged by
the parallel charger. Enable the watchdog so that when the bite timer
expires then charging will be disabled by hardware.
Change-Id: I82febbc28c05563d052c6eed034adc817df39790
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The smb138x parallel charger device has a watchdog timer that will
disable parallel charging if it is not pet by software. Enable it.
Change-Id: Ie28323cdabccdc64196fae25deb2f56dfbb5a0e7
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Reduce the VDD_GFX CPR maximum floor to ceiling voltage range for
each corner in order to meet the most recent hardware guidelines.
Change-Id: Ie70a698fbed442e8826f0bc30c5ef6bdfd5b3e1f
CRs-Fixed: 1098577
Signed-off-by: David Collins <collinsd@codeaurora.org>
Bus error can be generated on RDI write master even if there
is no data sent on it. This is not actually an error hence
ignore it.
CRs-Fixed: 1098568
Change-Id: I8dc24f3c4926f008d114778c890ad2c2902f84b9
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
When the camif input is disabled the stats streams need to be
turned off as well. Stop the stats stream by following the
correct stop sequence instead of just turning off the
stats write masters.
CRs-Fixed: 1098562
Change-Id: I4789bf9e837b1c0af7288e26ff02c4068638337a
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
Add option to put the isp hardware in secure smmu mode. The
isp stats will still be in non secure mode. Add ioctl to
indicate which buffer queue will be in secure mode so that
they can be mapped in secure mode
CRs-Fixed: 1060631
Change-Id: Ibf2050d0814cc2aaf22a6f510847054d78fd7477
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
Initialize the qos registers and turn on interrupts after reset.
CRs-Fixed: 1089171
Change-Id: I8ed92a835fec1d5297448f440c19cc22ba52728b
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
