Add device tree nodes for audio digital, analog, soundwire codecs.
Also add internal codec sound node for msmfalcon. Add LPI pinctrl instance
to support audio related LPI GPIOs. Update clock-ids and controllers
for PMI, AP and LNBB audio related clocks.
Change-Id: Idf6f56a365fdd57f4b0b191ee7bfb5e831abf443
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
For audio pinctrl settings in internal codec,
use cdc pinctrl functions to activate and
suspend gpios.
Change-Id: Ib0de01379a02636d35b49770aa82ea53de7c2768
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Internal codec variant has digital codec in
MSM and analog codec in PMIC, add respective
split codecs support to register two separate codecs.
Add digital codec as a child to analog codec and
handle inter-dependencies like sequences, SSR,
version info.
Change-Id: I6ead859ed0ad5c926d439a3985a5c4904ff757b5
Signed-off-by: Divya Ojha <dojha@codeaurora.org>
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In MSM based integrated codec, soundwire codec
is added at HW level which supports wsa speaker
using soundwire bus interface. Add respective driver
support for MSM based soundwire codec.
Change-Id: Ibe4abdbe15a6246b9abcf45402c22764b82699c2
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Low Power Island(LPI) has a GPIO controller which can
support 32 GPIOs, add pinctrl driver to handle GPIOs of LPI.
Change-Id: Id7d5d9a9b3a0ced59e1cc893ce0eb27dab6674a6
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
The fmax corner frequencies have got updated, and also new frequencies have
been added for few clocks, so fix and update the same.
Change-Id: Ic6e2c2208a8971b07ed6ccfc8d63091e4692301f
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Currently USB driver is not failing probe if USB core-clk-rate property
is not exist. This leads to USB enumeration failures across connect/
disconnect. Hence make core-clk-rate property mandatory and if in case
not defined, fail the probe. Also Fail probe if extcon property not
defined in case of OTG mode.
Also return error if dwc3_core_pre_init() fails during dwc3-msm_resume()
due to phy init fails and don't go ahead with setting up event buffers
as event buffers allocation is done.
Change-Id: I3927ad2f670e45acd10f8568857cf9f3434df657
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Add required regulator changes in msm8998-v2.1-interposer-msmfalcon.dts
file for USB functionality to be working.
Change-Id: I3e4a43de0c1de6573fea8a52929f6c7af5259755
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
This change enables USB RNDIS and RMNET drivers for BAM2BAM communication.
Change-Id: Ibfd9d12503248a3589bbda94096d40856ccba2c4
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Add bluetooth node for wcn3990 on msmfalcon. This change configures
various voltage regulator and clocks.
CRs-Fixed: 1100113
Change-Id: I403c9def4f90832174f45e21e6c6fceb4a77a2a0
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
If PMIC provides boost power for VBUS in host mode, it may
need to know the amount of current of an attached device
in order to optimize for overall power consumption. We can
pass the bMaxPower obtained from a device's configuration
descriptor when it is attached. This only affects devices
(including hubs) directly attached to the root port, as
any device downstream of a hub will either consume part of
the hub's budget or has external power.
Change-Id: I1ad2cfecb7a2f6bdeaced29a1753cdc1bf3849db
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add initial set of configuration for GPU mempools
to reserve page pools at init time of kgsl driver.
Change-Id: I088aafe8cef621550b1776ca5a652c66e8ac5b62
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Remove dev reference in icnss_set_wlan_mac_address as
this function is called by external module and won't
be able to get ICNSS dev pointer.
CRs-Fixed: 1099641
Change-Id: I21c992676c41b6cdc3ea53722806e8d0be78d9d5
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Compilation error fix for 32 bit version mpq demux common plugin
Change-Id: Id2472097e115f1c8d09886c1a1ceb01c4f5c5f4b
CRs-Fixed: 1090466
Signed-off-by: Udaya Mallavarapu <udaym@codeaurora.org>
MSM GPIO 64 is connected to Camera Focus Button and MSM GPIO 113 is
connected to Camera Snapshot Button. Add the nodes for these buttons
along with their pintrl configuration.
Change-Id: Ifc03c72233dcf1081fc3f2fed495d19e48bb8c7d
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
Current code is resizing each USB IN endpoint's TXFIFO to 1KB if it is
not USB GSI endpoint or bursting is not enable. In some high throughput
test case where there is contention in terms of accessing DDR memory
through SNOC between USB3 and other peripheral PCIE, there are many
underrun errors (i.e. Bad Data Length/Bad CRC) observed. These errors
results into retransmision of USB packets and sometime dropping packets
causing diffrent kind of data stalls. Hence fix this issue by increasing
TXFIFO size as 3KB with endless USB IN endpoint (i.e. USB BAM2BAM
endpoint) which helps to successfully retransmit packets.
Change-Id: I73860a7bb252a0226b591a5f732e6a7b864911cf
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
When function driver calls dwc3_msm_ep_queue() to queue endless request,
first check endpoint status and whether any request already queued or not.
If that is the case, return error. Else go ahead with queuing request
to USB HW. This helps in resolving the crash seen when request is being
queued again.
Change-Id: I3d6a603c693d1df36719f57684ffad409e1a0e78
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
On new platforms, endpoint clock gating is added for dbm endpoints
with Synopsys USB3.0 controller. This hardware feature requires
initialization of DBM endpoint before BAM pipe reset for bam2bam mode
data transfers working. Hence change sequence such that do DBM endpoint
initialization first followed by BAM pipe reset and do start transfer
as last operation.
CRs-Fixed: 965207
Change-Id: Ib5bfd1a7d258fe336a4c9924850fc9223c1c81f6
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
